similar to: Tripp-Lite SMART1500LCDT

I've made some progress getting this Tripplite to work: http://gathman.org/2016/07/30/Standard_Schmandard/ Basically, plug it into a USB hub that actually implements USB2.0, then power cycle the port when it hangs. It does seem to be a hardware problem with the USB controller. On 05/24/2016 09:06 AM, Charles Lepple wrote: > On May 22, 2016, at 10:18 AM, Stuart Gathman wrote: >> I

On May 22, 2016, at 10:18 AM, Stuart Gathman wrote: > > I have a ticket open with TrippLite, but at this point it seems to be a > software, rather than hardware problem, since with the newer kernel and > usbhid-ups, the ups stays on the bus, and I could kludge around the > problem by making systemd keep restarting nut-driver. They seem to be > interested in actually resolving

On 08/03/2016 05:25 AM, Stuart Gathman wrote: > I've made some progress getting this Tripplite to work: > http://gathman.org/2016/07/30/Standard_Schmandard/ > > Basically, plug it into a USB hub that actually implements USB2.0, then > power cycle the port when it hangs. It does seem to be a hardware > problem with the USB controller. Finally an idea;-) I had the same problem

On 08/05/2016 03:03 PM, Marco Walther wrote: > On 08/05/2016 01:36 PM, Stuart D. Gathman wrote: >> On Fri, 5 Aug 2016, Marco Walther wrote: >> >>> On 08/03/2016 05:25 AM, Stuart Gathman wrote: >>>> I've made some progress getting this Tripplite to work: >>>> http://gathman.org/2016/07/30/Standard_Schmandard/ >>>> >>>>

On Fri, 5 Aug 2016, Marco Walther wrote: > On 08/03/2016 05:25 AM, Stuart Gathman wrote: >> I've made some progress getting this Tripplite to work: >> http://gathman.org/2016/07/30/Standard_Schmandard/ >> >> Basically, plug it into a USB hub that actually implements USB2.0, then >> power cycle the port when it hangs. It does seem to be a hardware >>

[please use reply-all to include the list - the NUT lists do not add a reply-to header.] On Oct 23, 2015, at 2:03 AM, Null <null at wuffleton.com> wrote: > > Hi List, > > I recently picked up a Tripp Lite SMART1500LCDT while they were on sale to pair with my home server, and have tried getting it set up with NUT, since it seems to be supported. I can get the whole NUT stack up

On Aug 28, 2014, at 6:49 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > I have searched the archives and googled this problem with usbhid-ups. I would really appreciate any help anyone could offer to solve the problem. > > System: Ubuntu 14.04.1 Trusty Tahr Which kernel version are you using? > Installed nut from Ubuntu repositories ? nut 2.7.1 > > Ups.conf file

On Aug 29, 2014, at 2:02 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > See comments below. > >> -----Original Message----- >> From: Charles Lepple [mailto:clepple at gmail.com] >> Sent: Friday, August 29, 2014 5:35 AM >> To: barry at skrypnyks.com >> Cc: nut-upsuser at lists.alioth.debian.org >> Subject: Re: [Nut-upsuser] Smart1500lcdt will

Another Update: I had to reboot my server today. After the reboot, I had the exact same problem as before without the usb hub. Since I already had the ups connected and communicating, I decided to try to figure out how to fix it. Here is what worked for me using the usb 2.0 hub sudo upsd ?c stop sudo upsdrvctl stop sudo upsdrvctl start sudo upsd Everything connected up and was

See comments below. > -----Original Message----- > From: Charles Lepple [mailto:clepple at gmail.com] > Sent: Friday, August 29, 2014 5:35 AM > To: barry at skrypnyks.com > Cc: nut-upsuser at lists.alioth.debian.org > Subject: Re: [Nut-upsuser] Smart1500lcdt will not connect with usbhid-ups > > On Aug 28, 2014, at 6:49 PM, Barry Skrypnyk <barry at skrypnyks.com>

I have searched the archives and googled this problem with usbhid-ups. I would really appreciate any help anyone could offer to solve the problem. System: Ubuntu 14.04.1 Trusty Tahr Installed nut from Ubuntu repositories - nut 2.7.1 Ups.conf file maxretry = 3 # user = nut [TrippLite] driver = usbhid-ups port = auto productid = 3016 desc = "Tripp Lite UPS,

Barry, I have had success with NUT on Debian and an EATON 5E2000IUSB-AU 5E 2000VA/1200W UPS With 3 x OUTLETS which I believe is good value. I would believe the the EATON ?5E 1500VA/900W UPS With 3 x OUTLETS would work just as well. The 1500VA also uses the same batteries as the 2000VA so I would believe it would run its raited load longer than 2000VA. My eight drive RAID driver uses less that

I talked to Tripp Lite Technical support. Their policy is that they only support Fedora and SUSE. There is no one there that could help with Ubuntu or NUT issues. The only answer they could give me was to port the rpm files to Ubuntu and use them. This is way beyond my experience level. I will go to the local electronics store and buy a cheap USB 2 hub to see if that works. I will post the

Hi Stuart, I am using OpenMedaVault and purchased the Tripp-Lite SMART1300LCDT. I can't get it to work with OMV. Any ideas for me? I posted a request on the OMV community but no answers. Any direction would be appreciated. Thanks, Roman -------------- next part -------------- An HTML attachment was scrubbed... URL:

I?m setting up a new system and installed a new UPS with nut. System Specifics: OS: Debian 3.16.36 Nut version: 2.7.2 Install method: apt-get Device: TRIPPLITE SMART1300LCDT using usbhid-ups driver Problem: The output from upsc has a few incorrect values. They appear to be a matter of scale. root at server:/etc/nut# upsc tripplite at localhost Init SSL without certificate database

On 08/05/2016 01:36 PM, Stuart D. Gathman wrote: > On Fri, 5 Aug 2016, Marco Walther wrote: > >> On 08/03/2016 05:25 AM, Stuart Gathman wrote: >>> I've made some progress getting this Tripplite to work: >>> http://gathman.org/2016/07/30/Standard_Schmandard/ >>> >>> Basically, plug it into a USB hub that actually implements USB2.0,

The fix: Was following a howto here: https://raymondjdouglas.com/blog/2018/ups-monitoring/ Much thanks to David Zomaya for coming up with the recipe! Nut.conf: Just have  MODE=standalone UPS.conf [tripplite]      driver = usbhid-ups      port = auto      productid=3024      desc = "Tripp Lite Internet600U" upsd.conf  LISTEN 127.0.0.1 3493  LISTEN ::1 3493

I'm not seeing this in the log.  I'm guessing that's not great. May 20 19:57:28 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale May 20 19:57:33 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale May 20 19:57:38 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale May 20 19:57:43 elmer upsmon[3828]: Poll UPS

Thanks Marco, I may try this if I can't get David's udev rules to work. On Mon, Dec 9, 2019 at 12:58 AM Marco Walther <marco at sonic.net> wrote: > On 12/8/19 8:18 PM, David Zomaya wrote: > > I haven't tried it on RaspberryPi, but if there's some specific Tripp Lite > information I can help with, let me know. > > We had that discussion about the

David, Thanks again for your help today.  You're amazing. If the folks on the list could chime in - thoughts about what I could try next? May 20 19:57:28 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale pi at elmer:/home/macbackup $ lsusb Bus 002 Device 006: ID 0bc2:3343 Seagate RSS LLC Bus 002 Device 005: ID 0bc2:3343 Seagate RSS LLC Bus 002 Device