similar to: UPS Trust OXXTRON 1300VA not working

Thanks for reply. when i try richcomm_usb or blazer_usb or other usb i get the output of : sudo /lib/nut/usbhid-ups -a trust -DD this is the output: Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 Error: UPS [trust] is for driver richcomm_usb, but I'm usbhid-ups! i tried to set the ups.conf to: [trust] driver = usbhid-ups port = auto vendorid = 0925

I set the ups.conf to: driver = richcomm_usb port = auto now it is connected. There were the vendor variable and product id wrong. These are the variables i get in my OMV service output: device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto

Hi, are this UPS supported by any other driver than "richcomm_usb". The device works with richcomm_usb, but only signals online, offline etc. Not voltage, batterylevels etc. Bus 006 Device 009: ID 0925:1234 Lakeview Research Bus 006 Device 009: ID 0925:1234 Lakeview Research Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10

On Jan 22, 2016, at 6:02 PM, Andreas Cattelan <ilmondodiwit at gmail.com> wrote: > > I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed. > > i tried the blazer_usb driver and others but i didn't succeed. > > > My lsusb says > > Bus 002 Device 005: ID 0925:1234 Lakeview Research > It might work with richcomm_usb:

I have a Gentoo linux (OpenRC) desktop connected to a UPS, the brand is Vultech, but lsusb gives me this: Bus 003 Device 006: ID 0925:1234 Lakeview Research and I found an article about this hardware here, someone had it working with the richcomm_usb driver: http://verahill.blogspot.it/2012/12/kstar-australia-1500-va-ups-on-debian.html So, I installed nut and configured my UPS to work with the

On Thu, Dec 4, 2008 at 4:51 PM, Arjen de Korte <adkorte-guest at alioth.debian.org> wrote: > Author: adkorte-guest > Date: Thu Dec 4 21:51:28 2008 > New Revision: 1596 > > Log: > Added new richcomm_usb driver based on the lakeview_usb driver (using libusb). Sorry if I wasn't clear - I was advocating *renaming* the lakeview_usb driver to richcomm_usb. Is there another

Hello guys, Please help me to resolve the issue. I bought 'SVEN Power Pro+ 500 USB' UPS few days ago and tried to setup NUT 2.6.0 to work with it. blazer_ups driver doesn't recognize the UPS :( The Manufacturer provides 'PowerD' software for linux with installation instractions on a CD (see example below). --------===------- Welcom to PowerManager System!

----- Forwarded Message ---- From: Terry Powling <terrypowling at yahoo.co.uk> To: nut-upsuser at lists.alioth.debian.org Sent: Sat, 27 February, 2010 22:30:05 Subject: trouble setting up kebo-1000d ups (usb) Trying to setup Kebo ups-1000D with usb port. lsusb Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0925:1234 Lakeview Research Bus 002 Device

I am a complete novice in this area so please bear with me. I have installed nut version 2.6.2-1 for my debian 64bit system. I am trying to implement 'nut' for a new VIX2120 home UPS and have determined that I need the richcomm_usb driver [usb 0925:1234]. But it is not in /lib/nut although referenced in the documentation (driver.list) How do get hold of a copy? Due to ignorance I am not

Hi all, i've read a thread about this UPS from Peter van Valderen. He tried to develop a driver for this specific type of UPS. I've downloaded nut-2.2.2 and tried to apply the patches (lakeview.patch & lakeview.v2.patch) but both resulted in rejected chunks. I've tried to ./configure with type lakeview and then a make, but the make command fails. Does anybody has any

I'm totally new to this, so heres hoping i can give you the info you need ... I have a new Trust usb UPS hooked up to my iMac (running Lion) The UPS shows up in the system report with the following info: Product ID: 0x0003 Vendor ID: 0x06da (Phoenixtec Power Co., Ltd.) Version: 5.01 Speed: Up to 1.5 Mb/sec Manufacturer: CTN Location ID: 0xfa144400 / 10 Current Available (mA):

I'm totally new to this, so heres hoping i can give you the info you need ... I have a new Trust usb UPS hooked up to my iMac (running Lion) The UPS shows up in the system report with the following info: Product ID: 0x0003 Vendor ID: 0x06da (Phoenixtec Power Co., Ltd.) Version: 5.01 Speed: Up to 1.5 Mb/sec Manufacturer: CTN Location ID: 0xfa144400 / 10 Current Available (mA):

hi, i've just set up two new computers each with a Powerware 3105 ups. they have identical nut configurations and identical upss which are both plugged in via usb but only one is being detected by nut. the other keeps saying: Broadcast Message from nut at server-1 (somewhere) at 14:52 ... UPS ups at localhost is unavailable i tried plugging the ups into several different usb

Hi, I'm trying to configure my ups with nut which is a locally made one. It uses a rs232 port to talk to the computer and comes with a software called "Powermanager Lite" which is provided by Richcomm and supports Windows, Linux and UNIX. According to the manual it uses the Richcomm circuitry to talk to the computer and uses a drycontact protocol. Unfortunately I couldn't

On Feb 25, 2014, at 1:13 AM, Kris Jordan wrote: > If there is a next Windows release, perhaps the default NOTIFYFLAG's should be adjusted? > > NOTIFYFLAG ONLINE SYSLOG > NOTIFYFLAG ONBATT SYSLOG > NOTIFYFLAG LOWBATT SYSLOG > NOTIFYFLAG FSD SYSLOG > NOTIFYFLAG COMMOK SYSLOG > NOTIFYFLAG COMMBAD SYSLOG > NOTIFYFLAG SHUTDOWN SYSLOG > NOTIFYFLAG

If there is a next Windows release, perhaps the default NOTIFYFLAG's should be adjusted? NOTIFYFLAG ONLINE SYSLOG NOTIFYFLAG ONBATT SYSLOG NOTIFYFLAG LOWBATT SYSLOG NOTIFYFLAG FSD SYSLOG NOTIFYFLAG COMMOK SYSLOG NOTIFYFLAG COMMBAD SYSLOG NOTIFYFLAG SHUTDOWN SYSLOG NOTIFYFLAG REPLBATT SYSLOG NOTIFYFLAG NOCOMM SYSLOG NOTIFYFLAG NOPARENT SYSLOG The 'wall'

Hi All, I'm using a recent post 2.6.1 build provided by Fred (executables have modified date of 9th August) I have configured upsmon.conf with :- NOTIFYCMD C:\NUT\etc\NotifyCmd.bat and :- NOTIFYFLAG ONLINE SYSLOG+EXEC NOTIFYFLAG ONBATT SYSLOG+EXEC NOTIFYFLAG LOWBATT SYSLOG+EXEC NOTIFYFLAG FSD SYSLOG+EXEC NOTIFYFLAG COMMOK SYSLOG+EXEC NOTIFYFLAG COMMBAD SYSLOG+EXEC

hello, i've got a problem with the notifycmd here is a part of my upsmon.conf : NOTIFYCMD /usr/local/ups/bin/nut_notify NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "UPS %s is on battery" NOTIFYMSG REPLBATT "The UPS %s battery is bad and needs to be replaced" NOTIFYMSG LOWBATT "UPS %s is being shutdown by the master" NOTIFYMSG FSD

On Tue, 27 Oct 2015, George Anchev wrote: > Yes, that was the power off test. However the upssched-cmd script gave > absolutely no signs of activity. Even it's logger lines don't show up in > journalctl. No any permission error messages - nothing. Only the 2 > messages from upsmon - on battery and then on line power. > > Here is the nut-report: >

On Thu, 29 Oct 2015, George Anchev wrote: > Today I experienced something weird. As I was working, the system > started a shutdown and did shut down, then the UPS got powered off and > then back on - an expected behavior for a power fail situation. However > there was no power failure! ... > Oct 29 10:46:46 i7 upsmon[2239]: UPS myups at localhost battery is low > Oct 29