Displaying 20 results from an estimated 1000 matches similar to: "UPS Trust OXXTRON 1300VA not working"
2016 Jan 23
2
UPS Trust OXXTRON 1300VA not working
Thanks for reply.
when i try richcomm_usb or blazer_usb or other usb i get the output of :
sudo /lib/nut/usbhid-ups -a trust -DD
this is the output:
Network UPS Tools - Generic HID driver 0.37 (2.6.4)
USB communication driver 0.32
Error: UPS [trust] is for driver richcomm_usb, but I'm usbhid-ups!
i tried to set the ups.conf to:
[trust]
driver = usbhid-ups
port = auto
vendorid = 0925
2016 Jan 23
0
UPS Trust OXXTRON 1300VA not working
I set the ups.conf to:
driver = richcomm_usb
port = auto
now it is connected. There were the vendor variable and product id wrong.
These are the variables i get in my OMV service output:
device.mfr: Richcomm dry-contact to USB solution
device.model: UPS USB MON V1.4
device.serial: unknown
device.type: ups
driver.name: richcomm_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
2012 Apr 19
1
Trust UPS Oxxtron 1300VA (17679)
Hi,
are this UPS supported by any other driver than "richcomm_usb". The
device works with richcomm_usb, but only signals online, offline etc.
Not voltage, batterylevels etc.
Bus 006 Device 009: ID 0925:1234 Lakeview Research
Bus 006 Device 009: ID 0925:1234 Lakeview Research
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
2016 Jan 22
0
UPS Trust OXXTRON 1300VA not working
On Jan 22, 2016, at 6:02 PM, Andreas Cattelan <ilmondodiwit at gmail.com> wrote:
>
> I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed.
>
> i tried the blazer_usb driver and others but i didn't succeed.
>
>
> My lsusb says
>
> Bus 002 Device 005: ID 0925:1234 Lakeview Research
>
It might work with richcomm_usb:
2017 Sep 02
3
Problem with upsmon?
I have a Gentoo linux (OpenRC) desktop connected to a UPS, the brand is
Vultech, but lsusb gives me this:
Bus 003 Device 006: ID 0925:1234 Lakeview Research
and I found an article about this hardware here, someone had it working
with the richcomm_usb driver:
http://verahill.blogspot.it/2012/12/kstar-australia-1500-va-ups-on-debian.html
So, I installed nut and configured my UPS to work with the
2008 Dec 05
1
[nut-commits] svn commit r1596 - in trunk: drivers man tools
On Thu, Dec 4, 2008 at 4:51 PM, Arjen de Korte
<adkorte-guest at alioth.debian.org> wrote:
> Author: adkorte-guest
> Date: Thu Dec 4 21:51:28 2008
> New Revision: 1596
>
> Log:
> Added new richcomm_usb driver based on the lakeview_usb driver (using libusb).
Sorry if I wasn't clear - I was advocating *renaming* the lakeview_usb
driver to richcomm_usb.
Is there another
2011 Mar 18
1
blazer_usb for SVEN Power Pro+ 500 USB
Hello guys,
Please help me to resolve the issue.
I bought 'SVEN Power Pro+ 500 USB' UPS few days ago and tried to setup
NUT 2.6.0 to work with it.
blazer_ups driver doesn't recognize the UPS :(
The Manufacturer provides 'PowerD' software for linux with
installation instractions on a CD (see example below).
--------===------- Welcom to PowerManager System!
2010 Feb 28
1
Fw: trouble setting up kebo-1000d ups (usb)
----- Forwarded Message ----
From: Terry Powling <terrypowling at yahoo.co.uk>
To: nut-upsuser at lists.alioth.debian.org
Sent: Sat, 27 February, 2010 22:30:05
Subject: trouble setting up kebo-1000d ups (usb)
Trying to setup Kebo ups-1000D with usb port.
lsusb
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0925:1234 Lakeview Research
Bus 002 Device
2011 Nov 16
2
How do I get the richcomm_usb driver
I am a complete novice in this area so please bear with me.
I have installed nut version 2.6.2-1 for my debian 64bit system.
I am trying to implement 'nut' for a new VIX2120 home UPS and have
determined that I need the richcomm_usb driver [usb 0925:1234]. But it
is not in /lib/nut although referenced in the documentation (driver.list)
How do get hold of a copy?
Due to ignorance I am not
2008 Nov 30
4
Sweex 1000VA UPS (Lakeview Research)
Hi all,
i've read a thread about this UPS from Peter van Valderen. He tried to
develop a
driver for this specific type of UPS. I've downloaded nut-2.2.2 and tried to
apply
the patches (lakeview.patch & lakeview.v2.patch) but both resulted in
rejected
chunks. I've tried to ./configure with type lakeview and then a make, but
the make
command fails.
Does anybody has any
2011 Aug 26
3
Possible support for Trust 1300VA LCD Management UPS?
I'm totally new to this, so heres hoping i can give you the info you need ...
I have a new Trust usb UPS hooked up to my iMac (running Lion)
The UPS shows up in the system report with the following info:
Product ID: 0x0003
Vendor ID: 0x06da (Phoenixtec Power Co., Ltd.)
Version: 5.01
Speed: Up to 1.5 Mb/sec
Manufacturer: CTN
Location ID: 0xfa144400 / 10
Current Available (mA):
2011 Aug 26
3
Possible support for Trust 1300VA LCD Management UPS?
I'm totally new to this, so heres hoping i can give you the info you need ...
I have a new Trust usb UPS hooked up to my iMac (running Lion)
The UPS shows up in the system report with the following info:
Product ID: 0x0003
Vendor ID: 0x06da (Phoenixtec Power Co., Ltd.)
Version: 5.01
Speed: Up to 1.5 Mb/sec
Manufacturer: CTN
Location ID: 0xfa144400 / 10
Current Available (mA):
2009 Nov 30
1
troubleshooting UPS ups@localhost is unavailable
hi,
i've just set up two new computers each with a Powerware 3105 ups.
they have identical nut configurations and identical upss which
are both plugged in via usb but only one is being detected by nut.
the other keeps saying:
Broadcast Message from nut at server-1
(somewhere) at 14:52 ...
UPS ups at localhost is unavailable
i tried plugging the ups into several different usb
2024 Nov 01
1
NUT 2.8.1-3 " Can't claim USB device [051d:0002]@0/0: Entity not found" using usbhid-ups
Hello,
I was thinking about what could be going wrong here, and a few ideas pop
up:
1) If you installed NUT from packaging, there should have been no need to
add OS groups/users manually. There is a valid use-case for running
different daemons under different accounts, as long as they talk over
network and access same files or UNIX sockets at best by sharing a group
for that, but it does need
2024 Nov 01
1
NUT 2.8.1-3 " Can't claim USB device [051d:0002]@0/0: Entity not found" using usbhid-ups
Hi Jim,
Thanks for your help. I'll respond in the same order as you did:
1. Unfortunately, I did "chown" stuff to these created users... Since
the other three responses don't seem to be what you're looking for (but
that's only my uninformed interpretation), I suppose the problem lies here?
Is there a number of files/directories that I should
2024 Oct 30
1
NUT 2.8.1-3 " Can't claim USB device [051d:0002]@0/0: Entity not found" using usbhid-ups
Hi all,
Yesterday, I bought a UPS for the first time in my life, and was eager to
dive into NUT. But not all is working as expected... I saw a similar thread
started on 18 October, but it didn't help me. (I also spent a handful of
hours searching the web for solutions, and of course read the manual and
FAQ - "queequeg".)
I tried shutting my UPS (APC "Back-UPS BX750MI
2011 Apr 23
3
Richcomm Serial driver
Hi,
I'm trying to configure my ups with nut which is a locally made one. It
uses a rs232 port to talk to the computer and comes with a software called
"Powermanager Lite" which is provided by Richcomm and supports Windows,
Linux and UNIX. According to the manual it uses the Richcomm circuitry to
talk to the computer and uses a drycontact protocol. Unfortunately I
couldn't
2014 Feb 28
0
NUT on Windows, Wall->message.exe
On Feb 25, 2014, at 1:13 AM, Kris Jordan wrote:
> If there is a next Windows release, perhaps the default NOTIFYFLAG's should be adjusted?
>
> NOTIFYFLAG ONLINE SYSLOG
> NOTIFYFLAG ONBATT SYSLOG
> NOTIFYFLAG LOWBATT SYSLOG
> NOTIFYFLAG FSD SYSLOG
> NOTIFYFLAG COMMOK SYSLOG
> NOTIFYFLAG COMMBAD SYSLOG
> NOTIFYFLAG SHUTDOWN SYSLOG
> NOTIFYFLAG
2014 Feb 25
3
NUT on Windows, Wall->message.exe
If there is a next Windows release, perhaps the default NOTIFYFLAG's
should be adjusted?
NOTIFYFLAG ONLINE SYSLOG
NOTIFYFLAG ONBATT SYSLOG
NOTIFYFLAG LOWBATT SYSLOG
NOTIFYFLAG FSD SYSLOG
NOTIFYFLAG COMMOK SYSLOG
NOTIFYFLAG COMMBAD SYSLOG
NOTIFYFLAG SHUTDOWN SYSLOG
NOTIFYFLAG REPLBATT SYSLOG
NOTIFYFLAG NOCOMM SYSLOG
NOTIFYFLAG NOPARENT SYSLOG
The 'wall'
2011 Sep 02
2
NUT 2.6.1+ Windows 2008 R2 - NOTIFYCMD not being called
Hi All,
I'm using a recent post 2.6.1 build provided by Fred (executables have modified date of 9th August)
I have configured upsmon.conf with :-
NOTIFYCMD C:\NUT\etc\NotifyCmd.bat
and :-
NOTIFYFLAG ONLINE SYSLOG+EXEC
NOTIFYFLAG ONBATT SYSLOG+EXEC
NOTIFYFLAG LOWBATT SYSLOG+EXEC
NOTIFYFLAG FSD SYSLOG+EXEC
NOTIFYFLAG COMMOK SYSLOG+EXEC
NOTIFYFLAG COMMBAD SYSLOG+EXEC