similar to: Strange

Charles, This is how I have the upsmon.conf set up. ?The only time I get a message is if the?NUT Monitor gui is running. ?I open LXterminal, pull the wall plug, and I get no messagesin the terminal. ?MONITOR Asium_p700 at localhost 1 upsmon jsamcr master?MINSUPPLIES 1?SHUTDOWNCMD "/sbin/shutdown -h +0"?NOTIFYCMD /sbin/upssched?POLLFREQ 5?POLLFREQALERT 5?HOSTSYNC 15?DEADTIME

Time, not sure who owner is, but I've tried as both admin and myself, to no avail. ?However, I told you that mesg is y, buti tried to send a mesg using ?' write ' ?and it says I have messages disabled. ????? ? I did that by opening two?terminals, on I logged in as ' su ', and sent the message from there. ?Is that peculiar? Might account for why I am notgetting anything from

Tim, Thanks for the feedback. ?I am the only user (standalone system), but I checked 'mesg' and made sure it was set?to 'mesg y' . ? And the execute permissions for wall are ? rwxr-sr-x ?and the filename is has a ?kind of orange highlightedbackground. Don't know what that means. John?"Science is organized common sense. Philosophy is organized piffle" -attributed to

Tried 'echo hi | wall' and no message. ?I looked at 'wall -h' and it would seem that it is supposed to. ?I eventried ?' wall ?[<filename> | <message>] ' ?and got nothing. ? Not sure what that means, as when using theNUT-Monitor program I get banners and a 'message' on the system try. ? Strange ! John ??"Science is organized common sense. Philosophy

ls -lia /<path>/wall will give you the owner and group . . . . Messages off . . . I think you are on the path . . . . -Tim On July 15, 2015 10:00:51 PM CDT, john hart <jsamcr at yahoo.com> wrote: >Time, not sure who owner is, but I've tried as both admin and myself, >to no avail. ?However, I told you that mesg is y, buti tried to send a >mesg using ?' write '

I pulled the AC power and let the system shutdown. ?Everything appears to have gone well. ?Checked thesystem log and found the following sequence of events: [CODE] Jul 15 10:20:50 debian upsmon[678]: UPS 1 on batteryJul 15 10:26:05 debian upsmon[678]: UPS 1 battery is lowJul 15 10:26:05 debian upsd[675]: Client upsmon at 127.0.0.1 set FSD on UPS [Asium_p700]Jul 15 10:26:05 debian upsmon[678]:

As an update to my first message, sent July 13, I am totally out of my league.I installed nut (apt-get install nut) on Debian Jessie. ?Went through the process of modifying?ups.conf and copied the udev ( cp /lib/udev/rules.d/52-nut-usbups.rules /etc/udev/rules.d/ ) When I ran ?upsdrvctl start ?I got a message about the usbhid-ups driver. ?It appears that NUTis not configured with the driver. ?The

Looking in to my previous question about no messages until clicking NUT Monitor GUI,I found that it was recommend to make sure that /etc/default/nut ?should be as follows: # /etc/default/nut START_UPSD=yes START_UPSMON=yesHowever, there is no '/etc/default/nut' . ? Do I need to create it ? John? "Science is organized common sense. Philosophy is organized piffle" -attributed to

Here is the previous email that I sent directly to Charles Lepple. ?I am now sending to the correct email with cc to Charles. ---------------- I am looking at, and trying to understand the rest of the conf files. ?But first want to askabout something from this message:[CODE]root at debian:/home/john# upsdrvctl startNetwork UPS Tools - UPS driver controller 2.7.2Network UPS Tools - Megatec/Q1

Who is the owner and group for wall? Note that it is set group ID to allow it to write to sessions . . . thus, that owner needs to be a system account that can write to devices, not just Joe-Bob . . . You might also try 'strace wall' to see what it is trying to do. - Tim On July 15, 2015 9:48:32 PM CDT, john hart <jsamcr at yahoo.com> wrote: >Tim, >Thanks for the feedback.

I have just recently gotten NUT to work on my system, with much assistance from Charles Lepple, and am very?grateful for his assistance. ? I now have a question regarding the NUT-Monitor program. ?There is a tool in the GUI that is for sending devicecommands. ?I can't get it to work. ?Whenever I try to send a command I get the following message: Failed to send <command> ?(ERR USERNAME

Any chance someone put 'mesg n' in the system profiles? That wou;d suppress wall output. Try typing just 'mesg' and see what it says . . . otherwise, check permissions on wall perhaps . . . - Tim On July 15, 2015 7:43:38 PM CDT, john hart <jsamcr at yahoo.com> wrote: >Tried 'echo hi | wall' and no message. ?I looked at 'wall -h' and it >would seem that

Please use Reply-All. On Jul 13, 2015, at 11:00 PM, john hart <jsamcr at yahoo.com> wrote: > Okay. I went through the pages from Roger Price and have set up enough, I think that I > should at least get an 'OL' response when I run 'upsdrvctl start' . Instead I get this: > [CODE] > root at debian:/home/john# upsdrvctl start > Network UPS Tools - UPS driver

Either I am missing something or I am really STUPID. 1. I have added a user, named nutmon, to the nut group. 2. In upsmon.conf I have set RUN_AS_USER nutmon . 3. I have NOTIFYCMD /etc/nut/notifyme.sh and it is set as 755, so should be executable by everyone. 4. I have the NOTIFYFLAG set as SYSLOG+WALL+EXEC, so the shell should execute. This is the shell script : #!/bin/bash # # NUT NOTIFYCMD

On Sep 22, 2015, at 11:27 AM, Thomas Charron <twaffle at gmail.com> wrote: > > On Tue, Sep 22, 2015 at 9:56 AM, John Hart <jsamcr at gmail.com> wrote: >> notify-send > > notify-send needs a DBUS_SESSION_BUS_ADRESS to work right. Look around for code snippets to get this. Ah, that notify-send. Another option is to launch the PyNUT app in your xsession (or

Greetings.? I have been using NUT for some time now and have not had any issues until yesterday.? I was trying to get my NOTIFYCMD script working and was making modifications to upsmon.conf .? After making the mod to upsmon.conf I invoked upsmon -c reload and a few minutes later the system shut down.? There was a loss of communications with the UPS.? I have an Asium P700 UPS and use the blazer_usb

Well, things might be working. ?I have gotten the upsmon.conf set up so that when I unplugthe wall power I get a message. ?Have not yet tested that I get a system shutdown. ?That iscoming soon. ?? One more thing I would like to know, however, and that is this: ?When I get a shutdown, I doNOT want the system to restart when wall power returns (AC power in Costa Rica can bekind of flaky). ? If I did

Disclaimer: Not a troll I'm curious as to this obsession with uptime is. All of the posts of this type are along the lines of "After X days, Y thing does not work but if I reload or reboot, it's OK" - so why not cron a reboot? Is it considered bad form or something like that? I reboot every night whether it is needed or not, not afraid to admit it, and everything works fine for

My code is the following: point_type<-c("black","gray20","red"....) ... for (i in 1:dim(m)[1]) { par(pch=(18+i)) par(fg=point_type[i]) plot(m[i,], type='b', ylim = c(lower, upper), type = "l", ...) par(new=T) } Now I need to add an 'explanation' to each pch. I would have a box in the upperright

I just looked at the ups.conf file and noticed that I have ondelay=40. Should that not have overwritten the value shown for ups.delay.start? Perhaps this UPS is not ready for prime time ! However it works okay for me. John Hart -------------- next part -------------- An HTML attachment was scrubbed... URL: