similar to: Installing Wine in FC2-Athlon

Hi have set the following tbf tc qdisc add dev eth0 root tbf rate 0.5mbit \ burst 5kb latency 70ms peakrate 1mbit \ minburst 1540 I want to add a filter so the ip traffic pass from it.. plz help me __________________________________ Yahoo! Mail Stay connected, organized, and protected. Take the tour: http://tour.mail.yahoo.com/mailtour.html

After buying some additional lines from my telco, I recently had my phone vendor wire the additional lines from my phone box into an amphenol connector that's plugged into my channel bank (Adit 600). However, although I make the following changes in my zaptel.conf and my zapata.conf files respectively and then reboot, the new channels, when selected for an outbound call, resume a dialtone

I have the following issue: 1) Call comes in from PSTN to Asterisk (IP A) and Asterisk forwards call to a SIP Proxy (IP B) 2) SIP Proxy (SER) forwards the call to a registered user. User does not answer and Call Forwarding is turned on for the user and the number to forward the call is a PSTN number. 3) After a specific timeout, SER has to forward the call to the "forwarded" PSTN

Probably doesn't help diagnose the problem.... but there were also audio problems experienced with this cvs version even on LAN / sip2sip / no transcoding > > ERROR[1171] UTILS.C:509 TVFIX: WARNING NEGATIVE TIMESTAMP -194931. ... > > I will be looking into this issue later today. __________________________________ Yahoo! Mail Stay connected, organized, and protected. Take

Hi: I need help setting-up multiple calling cards with different prices for the same routes using astcc. All my calling cards' routes now have the same price, but I need to be able to set multiple calling cards with different prices for the same route. I appreciate your feedback of How I can do that. Thanks; Chawki __________________________________ Yahoo! Mail Stay

Hi all, i am running a application which uses ODBC DSN. this is file and connecting with MS sql server. but when i run my program as $ wine c:\\crm\\PMonitor.exe i get fixme:vxd:VXD_Open Unknown/unsupported VxD L"secprov.vxd". Try setting Windows version to 'nt40' or 'win31'. But setting to this versions doesnot help as it provides dsn error like nddeapi.dll could not

--- Dan Pritts <danno@umich.edu> wrote: > Hi all - > > I've just finished building flac in the "darwinports" environment > on MacOS 10.3.9. > > The port maintainer (i've cc'd him) had disabled the xmms plugin > build. > > I wanted that, so I changed the portfile and built locally, yada > yada. > > I've run into three problems,

> All TCP connections have a port number, the default > for http is 80. Thanks. Good point. I was wondering how to handle this in icecast.xml. > As for the source of the relay, it can be shoutcast > or icecast, because > the relay is classed as a listener by the source. What if the source is neither icecast or shoutcast - but another mp3 stream source? If it matters, why?

Does anybody know what went wrong? Wine doesn't seem to work on RedHat 7.0 Hans [root@duron win98]# wine --winver win98 ./winmine.exe err:module:BUILTIN32_dlopen failed to load .so lib for builtin wprocs.dll: symbol __sysconf, version GLIBC_2.2 not defined in file libc.so.6 with link time reference err:int:INT_GetPMHandler could not load wprocs.dll err:seh:UnhandledExceptionFilter

Hi, I compiled wine-20010510 and tried to run winmine.exe, but got the following error message: $ wine winmine.exe err:int:INT_GetPMHandler could not load wprocs.dll err:seh:UnhandledExceptionFilter Couldn't start debugger (debugger/winedbg 134624448 44) (2) Read the Wine Developers Guide on how to set up winedbg or another debugger err:ntdll:RtlpWaitForCriticalSection Critical section

On Wed, 30 May 2001, Bence Fejervari wrote: > > Hi, > > I compiled wine-20010510 and tried to run winmine.exe, but got the > following error message: > > $ wine winmine.exe > err:int:INT_GetPMHandler could not load wprocs.dll ... > > What is this wprocs.dll file it misses? I couldn't find it anywhere... > I dunno, but wine has a built in one (libwprocs.so -

Hiji wrote: >--- "David F. Colwell" <dfcolwell@dfcolwell.com> >wrote: > > >>Hiji et al, >> >>Couldn't find Half-Life or Counter-Strike in the DB >>yet they returned... >> >>Submitted version rejected >> >> >> >------------------------------------------------------- > > >>The version you

Hello: We have a Fedora Core 2 (FC2) server with Dovecot and Procmail. Versions are: dovecot-0.99.13-4.FC2 procmail-3.22-13 We use "maildir" below home directory like: /users/operaciones/epezoa/maildir, where "epezoa" is my account. If I receive an e-mail, is stored at "new" folder. When I try to get e-mail from server, message is transfered from

Hi All, It is normal that Windows applications run _very_ slow under Wine? I'm talking about simple application, like notepad, winmine. My system: FreeBSD 4.4-STABLE RAM 128M CPU Celeron 466MHz Wine wine-2001.08.24 XFree86-4.1.0_6 Everything I run from TWM (manager which is run by startx). TIA

Hi All, I am running Samba version 3.0.7-2.FC2. I've been noticing the following messages in /var/log/messages: Sep 22 09:35:47 www kernel: lease broken - owner pid = 6024 Sep 22 09:36:32 www kernel: lease broken - owner pid = 25134 I've been told that if I place "kernel oplocks = false" in my smb.conf file, I won't see this message any more. However, if I do this, does

I was reading the WINE Traffic #245 and so I thought about trying the RPMs that Vincent produces for FC2. Before I installed them I looked at the file contents and noticed that there does not seem to be a "fake windows" drive setup in the RPM and that the Windows User tools like Notepad and Control are not in the RPM. Is there another RPM that I need to get to install these tools?

I am having difficulty with dependencies for the R rpm for Fedora Core 2. In attempting to load R-2.0.0.0.fdr.1.fc2.i386.rpm it fails the libtk8.4.so dependency even though I have this library loaded. The library is located in: /usr/local/lib. How might I tell R where to find this library? I am new to Linux and loading rpms so I am hoping there is a simple answer and that the problem is

CPU 99.3%: 2170 root 25 0 11656 3228 10m R 99.3 0.5 0:07.42 smbd We're having the same problems as many others with print queues, client lock-ups, etc. I think maybe this CPU problem is related as we have two servers in two locations with the same versions, and both had the problem immediately after upgrading to 3.0.10. We use the YUM facility to upgrade Samba. To react to these

I have made my first run at building FC1 and FC2 rpms for Asterisk 1.0.0. These are based off of Greg's spec files which a few minor changes. Source and binary RPMs are available at: ftp://asterisk.purplehat.net/pub/asterisk/ Please report any problems with these files to myself and not Greg as he has nothing to do with these builds. :) Sorry these took so long; it was a wild week at

Hello, I've uploaded current builds to ftp://ftp.linuxsys.com/pub/releases/FC2/asterisk-CVS ftp://ftp.linuxsys.com/pub/releases/FC2/asterisk-1.0 Regards, -- Andrew McRory - President and Chief Techincal Officer Linux Systems Engineers, Inc. - http://www.linuxsys.com Located in beautiful Tallahassee, Florida Office 850-224-5737 Office 850-575-7213 Mobile 850-294-7567