similar to: TDM cards

I tried adding wwww to my dial string... It appears to not made any differnece. I see by watching show channels that the w's are there in the dial. I have this box connected to bell south down in georgia. I have an identical box connected in indiana. The box in indiana works fine when dialing out. When in GA dialout is getting "you must first dial a 1 to place this call". show

hi i need help in connecting a X100P-clone in germany. Basic questions: a)what configuration do I need ? what is the difference (maybe explain in german? via email?) fxs_ls: FXS (Loop Start) fxs_gs: FXS (Ground Start) fxs_ks: FXS (Kewl Start) b) can I use one card for connecting to the telephone network (in this case my analog pbx) and the same card for connecting an analog phone

hello, I just installed 2 brand new x100p cards into my linux system. Everything compliled and worked fine from the first try. Hoewver the phone lines I will use with this system have groundstart signaling. I have tried to change the zaptel.conf and zapata.conf to use this type of signaling but ztcfg gives me an error every time with the new configuration. Bellow are the config files and the

List, I just tried to swap out our 410 for a 411 and we started have problems with on of our T1's. Setup: Span 1 - Dedicated PRI for long distance. Span 2 - 12 channels fxs_gs outgoing local. 12 Channels em_w incoming DID's. I didn't have any problems with the PRI. The trouble was with the T1. We were unable to place any local calls, and all incoming DID's where garbled.

1. Emma is performing an experiment that requires individual handling of some animals. The sizes of the animals are lognormally distributed: The natural logarithms of their sizes has a normal distribution with mean 3 and standard deviation 0.4. The time (in minutes) it takes to handle each animal is given by 10 + s · 1.5 + eε for animals with s ≤ 20 20 + s · 0.8 + eε for animals with s > 20

Hello! We are using the Digium 405PP card, and getting the following messages: Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event: 6 on Primary D-channel of span 1 Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event: 8 on Primary D-channel of span 1 My config file is below. We are trying to set up D-Channel on channel 24, 1-23 in trunk group 1,

To all moderators i guess, my question was probably not clear this is not a homework, i am trying to understand R by doing some exercise in my book. I will however participate a course in R in august and thought it could be good to have some knowledge before. I hoped for help from you since i have no instructor to ask, that would have been my first choice. thanks anyway Lotta

Hi all, I have data that looks like number|grouping I would like to preform stats for each grouping so 1|5 6|5 10|5 11|5 3|9 5|9 10|9 Say I would like to take the median for above, I should be returned 2 lines, one for group #5 and one for group #9 Does this make sense? I am sorry for the basic question, can someone give me the name of a good book as well? Thanks, Lotta [[alternative

Hi All, I have just migrated from Asterisk 1.0.0 to Asterisk 1.0.5 and I have an X100P installed. The old asterisk was working, but now the new version isn't picking up any calls! However, I did notice that after installation, I performed modprobe zaptel and modprobe wcfxo and they worked fine, but when I executed ztcfg, I get the following errors: ioctl(ZT_LOADZONE) failed: Invalid

Hello. I am a spanish student, so excuse my English. I have this HW: - 2 X100P PCI with two analog lines plugged in. These lines are two extensions of a panasonic PBX. Zap/1 = X100P <-- analog line --> extension #237 PBX Panasonic Zap/2 = X100P <-- analog line --> extension #245 PBX Panasonic - 1 TDM20B with two analog telephones plugged in. Zap/3 = TDM20B

is there anyway that scaffold would read the database and I don''t have to specify any of the columns? it is really frustraiting specially when you''ve got a lotta cols and tables! I''d like to use rails for an enterprise app but not a toy app like all those apps in tutorials -- Posted via http://www.ruby-forum.com/. --~--~---------~--~----~------------~-------~--~----~

I have a bit of a weird problem that I'm having great trouble debugging. I have a TDM400P PCI card with two FXO and two FXS modules. Both FXO modules are connected to BT lines here in the UK. Both BT lines have V23 Caller-ID, which works fine with Asterisk. Both asterisk and zaptel are fresh from CVS. Both FXO modules (channels 3 and 4) are in "group 1" for outgoing calls. My

R-BiocFileCache is now branched for f32 (finally). You should be able to build it if/when the PDC comes back up. Lotta random outages right now. Tom On Mon, Jul 6, 2020 at 10:40 AM Jos? Ab?lio Matos <jamatos at fc.up.pt> wrote: > On Tuesday, 9 June 2020 03.40.52 WEST Tom Callaway wrote: > > Over the last several days, I've been working hard to get all of the > Fedora >

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.8.0-rc5 DAHDI-Tools-v2.8.0-rc5 dahdi-linux-complete-2.8.0-rc5+2.8.0-rc5 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete *** THIS RC FIXES

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.8.0-rc5 DAHDI-Tools-v2.8.0-rc5 dahdi-linux-complete-2.8.0-rc5+2.8.0-rc5 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete *** THIS RC FIXES

Has anyone had any success with the Rhino CB-24? I can't get mine to work, I tried all the obvious settings. The cb-24 gets stuck at init ESF framing, as if it's not seeing the t1 card at all. It does get a t1 carrier (detecting voltage??) Help! Thanks.. Everything appears to look good on the server, I did: [zaptel.conf] span=1,0,0,esf,b8zs fxogs=1-24 [zapata.conf] signalling=fxo_gs

Hello list. I'm going te explain my trouble. I have my asterisk with a TDM400P with 4 FXS channels. Two ports are connected to a Panasonic PBX (it's working fine), and others two ports are connected to an Alcatel 4200 PBX (but it doesn't anwer). I connected to a CO port (where i had a pstn line). When I call to the Alcatel PBX, the asterisk show me in it console that es ringing but

Steve, Here is the config, I pulled from my server, that works with D'Link Phones: Main Menu -------------------------------------------------------------------------------- SIP.CONF [general] port = 5060 ; Port to bind to (SIP is 5060) ;bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) bindaddr = 67.109.153.236 disallow=all ;allow=ilbc allow=gsm allow=ulaw

Hi! I'm comparing the differences in contaminant concentration between 2 different groups of people ( N=36, N=37). When using a simple linear regression model I found no differences between groups, but when evaluating the diagnostic plots of the residuals I found my independent variable to have deviations from normality (even after log transformation). Therefore I have used bootstrap on

On 06/08/18 15:26, m.roth at 5-cent.us wrote: > Valeri Galtsev wrote: >> On 06/08/18 13:48, m.roth at 5-cent.us wrote: >>> Frank Cox wrote: >>>>>> so if it would work, replace shortname with short and short1? >>>> >>>> With all of this hokey-pokey surrounding licensing and mac addresses, I >>>> wonder if this outfit is