similar to: configure AudioCodes MP-112 with Asterisk.

Has anyone used the AudioCodes MP-20x? http://audiocodes.com/Objects/Analog_Telephone_Adapter_Series_MP_20X.pdf Seems like a good device, but I can't seem to find anyone actually using them... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061022/6ca85b8c/attachment.htm

On 02/15/2018 04:49 PM, Joshua Colp wrote: > On Thu, Feb 15, 2018, at 7:46 PM, thelma at sys-concept.com wrote: > > <snip> > >> >> Thanks again for the hint. >> Here is the output from asterisk. >> >> The call is coming on Audocodes gateway from: pstn-4444 >> >> But asterisk display: >> Found peer 'pstn-9998' for

I was able to setup AudioCodes MP-114 to rote calls form FOX to Asterisk and make internal calls: Routing Tables -> Tel to IP Routing: *, *, 10.0.0.109 (my asterisk IP) But I'm not sure how to setup AuioCodes to make calls out via FXO? In extensions.conf [Globals] pstn-5665=10.0.0.157 Whenever, I try to call out I get a busy signal. -- Joseph

I'm trying to get a MP-114 FXS/FXO gateway working with Asterisk. It registers fine and I can call between the MP-114 and other extensions, but I'm not having much luck with the FXO ports. syslog shows the problem to be in the MP-114 configuration. Can anyone help?

On 02/15/2018 03:44 PM, Joshua Colp wrote: > On Thu, Feb 15, 2018, at 6:43 PM, thelma at sys-concept.com wrote: >> I'm using Audio-codes MP-114 unit and it has two public lines PSTN ports >> >> IN audocodes setting I have: >> "EndPoint Phone Number" >> >> Channel: 3 phone number: pstn-4444 >> Channel: 4 phone number: pstn-9998

I have AudioCodes MP-114 and I'm trying to configure SAS (Stand Alone Survivability); when Asterisk is down the MediaPack gateway should forward the call IN/OUT through the gateway (without asterisk in the middle), but it is not working. I'm working with tech. support from the source I purchase the unit from they we are just emailing back and forth and the unit is still not working. Can

Hello, Anyone here have experience with Audiocodes MediaPack MP-108 Gateways? I would be willing to pay someone for advice and support with configuring my gateways for a telemarketing project I am starting. My experience is somewhat limited but all I want to do is make outbound calls just like I would on normal pots lines. (That's the best way to explain it) I do not need any special

Greetings; We are trying to get Asterisk up and happy at our site-we tried VOIP using Sphere about a year ago, spent a *boodle* on expensive hardware and services from a local "expert", but it never was happy. I'm brand-spanking new at VOIP, and I've learned a *ton* getting Asterisk breathing in the last couple of days. I have three Polycom Soundpoint IP 500 SIP phones, which

Hi list, I'm trying to get ready the MP-104 FXO to use qith my box, but when I send calls I hear only dial tone and after a few seconds I get busy signal. I very appreciate your advices. Command line results and SIPconfigurations follows: *CLI>* -- Executing [7991696900 at total:1] Playback("SIP/101-09dd8918", "beep") in new stack -- <SIP/101-09dd8918>

I'm using Audio-codes MP-114 unit and it has two public lines PSTN ports IN audocodes setting I have: "EndPoint Phone Number" Channel: 3 phone number: pstn-4444 Channel: 4 phone number: pstn-9998 When I am calling " pstn-4444" the port number "Channel:3" lights up but asterisk is showing that the call is coming on "pstn-9998" -- Executing .....

On 02/15/2018 04:08 PM, Joshua Colp wrote: > On Thu, Feb 15, 2018, at 7:03 PM, thelma at sys-concept.com wrote: >> On 02/15/2018 03:44 PM, Joshua Colp wrote: >>> On Thu, Feb 15, 2018, at 6:43 PM, thelma at sys-concept.com wrote: >>>> I'm using Audio-codes MP-114 unit and it has two public lines PSTN ports >>>> >>>> IN audocodes setting I

I'm having problem passing Caller ID to asterisk from AudioCodes MP-114 (FXO) AudioCodes is passing the caller ID to Asterisk but Asterisk is trying to interpret it as authentication: [Dec 31 11:41:07] WARNING[9752]: chan_sip.c:8553 check_auth: username mismatch, have <pstn-5665>, digest has <pstn-1270> [Dec 31 11:41:07] NOTICE[9752]: chan_sip.c:14316 handle_request_invite:

I'm using Asterisk 1.2.3 and PANASONIC KX-TS208W - Speakerphone does not work with it. It works fine when you pick up the handset. Anyone experinced this problem before, the speaker works fine with Verizon line. The phone is behind a Linsys router RT31P2. -------------- next part -------------- An HTML attachment was scrubbed... URL:

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body text="#000000" bgcolor="#ffffff"> <font size="+1">Does anyone have links to the most recent audiocodes

I have some Audiocodes units which appear to be running Linux, according to the unit's own "System Log" kern.warn Linux version 2.4.21openrg-rmk1 #2 Wed Aug 30 17:05:29 IDT 2006 However my contact at Audiocodes claims otherwise On 12/4/06, Yaniv Nizan <Yaniv.Nizan@audiocodes.com> wrote: > > > > I doubt that we are running Linux on the MP-202. Perhaps there is a

I have an Audiocodes MP-114 and modem dial-out can not establish connection. Snooping with Wireshark I get a lot of entries like this: No. Time Source Destination Protocol Info 2934 27.221559 10.0.0.110 10.0.0.109 RTP PT=ITU-T G.711 PCMU, SSRC=0x7D08611A, Seq=7662, Time=1805957855 Frame 2934: 214 bytes on wire (1712 bits),

Sir, Here is the working Audiocodes MP-11X FXO configurations to work with Asterisk. ;************** ;** Ini File ** ;************** ;Board: MP-118 FXO ;Serial Number: 905371 ;Slot Number: 1 ;Software Version: 5.00A.024 ;DSP Software Version: 204IM => 209.13 ;Board IP Address: 192.168.0.195 ;Board Subnet Mask: 255.255.255.0 ;Board Default Gateway: 192.168.0.1 ;Ram size: 32M Flash size:

guys, what firmware version of audiocodes mp104 fxs are you using with asterisk? i'm having sip stack problems. ~kelvin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030916/50d5f5de/attachment.htm

I am currently installing an Audiocodes MP-108 with Asterisk in Singapore. I am able to make outgoing calls but incomming calls just get cut by the MP-108 I can see the corrosponding frontpanel led light p but the call gets cut so I'm very confused about what could be wrong. Could this problem have something to do

Is anyone on the list using an Audiocodes gateway with asterisk and SIP? I'm looking at that platform, but I have a couple of issues: 1) Echo cancellation. The echo that I'm hearing with an X100P is unacceptable. Does the Audiocodes do better? 2) Line signalling. I'm using Kewlstart with the X100P, but it looks like the audiocodes uses loopstart only. How does this work with