similar to: Kernel/Asterisk/DAHDI/Libpri version matrix?

Hi, After an upgrade, I discovered yesterday strange things I would like to share here. Basically, I'me comparing platforms: The first one is a 2.6.26 (Debian Lenny) platform, with Asterisk 1.6.1.18, Libpri 1.4.10.2, Dahdi revision 8853 (must be between 2.3 and 2.5, I think). The second one is a 2.6.32 (Debian Squeeze) platform, with Asterisk 10.5.1, Libpri 1.4.12, Dahdi 2.6.1. Both are

I am current running on a production system zaptel 1.4.12.1 libxpri 1.4.1 asterisk 1.4.25 The above configuration works. I tried to update to dahdi 2.2.0, libpri 1.4.7 and asterisk 1.4.25 This did not work. calls came in but not out. I dropped back to the initial configuration. Today, I dried only updating libpri on the original configuration. I removed /usr/lib/libpri* installed libpri 1.4.7,

Hi All; I have an E1 card with two ports for ISDN PRI. Do I need to install DAHDI in addition to LIBPRI? For placing outside calls (outgoing) via the PRI, then in the extension.exe file, I will use the Dial function? But how can I determine that I need to use the PRI channels and not the analoge channels? Last point: how can I know that asterisk is containing libpri? In other words, how can I

Hy guys i am having so much hard time to setup asterisk on a virtual machine that i got , i just want to know if i really need to use Dahdi and libpri on a complete Digital PBX i just gonna use sip and iax. I will never use any kind of analog line on this machine. Wait for a feed back. Daniel Abreu.

Hi, I would appreciate some advice on the following: how does one use a single BRI port HFC chipset based ISDN cards with the latest DAHDI, libpri and Asterisk 1.8? For Asterisk 1.4 I would first install mISDN & mISDNuser and then build Asterisk 1.4. Now I noticed that Digium's HFC chipset based B410P is supported by the latest DAHDI & libpri but reading the source of the

hello,all there is a AudioCodes Mediant 2000 out there. i want to realise ip to PSTN and PSTN to ip connection. after some configuration on AudioCodes Mediant 2000, PSTN to ip connecttion works. next ,i want to dial from asterisk to PSTN now. i have see the sample in the extensions.conf relevent to PSTN as follow: ; If you are freely delivering calls to the PSTN, list them here ; ;exten =>

Hi, I need to rebuild a system which has 4 BRI ports and is connected to Point-to-multiPoint lines, in a country where telco often "drop lines for energy savings". I'm planning to use latest 11.4.0 asterisk version along with dahdi and libpri (no misdn). Which version are recommended for Dahdi and Libpri ? My main requirements are, beside having calls coming in and out: - keep a

I have 12 T1's going into 3 servers, 4 in each into "Digium, Inc. Wildcard TE410P Quad-Span togglable E1/T1/J1 card 3.3v (rev 02)" cards. Each "group" of T1's have the primary D on 24 and the secondary D on 96. The first server (ts20) and the last server (ts22) can playback "demo-congrats" fine. The "middle" server (ts21) cannot -- just dead air.

Hi Steve, What language is that please? We're using Perl and so far I haven't found an equivalent there. Thanks for your help. On Fri, 7 Jun 2019 at 12:10, Steve Edwards <asterisk.org at sedwards.com> wrote: > On Fri, 7 Jun 2019, David Cunningham wrote: > > > We have a need to record audio and allow the user to press any DTMF key > > to end the recording.

On Fri, 18 Mar 2016, Trey Hilyard wrote: > I thought this would be as easy as > exten => _XXXXXXXXXX\;rn=+19136630000,1,Goto(from_pstn,${EXTEN:0:10}) Have you tried the '_!.' pattern? -- Thanks in advance, ------------------------------------------------------------------------- Steve Edwards sedwards at sedwards.com Voice: +1-760-468-3867 PST

hello friends, i have to configures asterisk n my hardware details are O.S - Ubuntu 8.04 Lts Memory - 1 GB Proccessor- core 2 duo is any one having a good link or how to related asterisk. any help,support will be higly appreciated thx -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Steve, Thanks for the answer. Since that's what we already have configured, any idea why it wouldn't work? As I said, when "asterisk -rx 'logger reload'" is run it still rotates the log file. On Wed, 20 May 2020 at 18:37, Steve Edwards <asterisk.org at sedwards.com> wrote: > On Wed, 20 May 2020, David Cunningham wrote: > > > We have an Asterisk

I want to capture all SIP messages. I have about 30 hosts in about 6 colos. My first thought was dumpcap, but the output file name format bugs me. What do you use for long term SIP capture? -- Thanks in advance, ------------------------------------------------------------------------- Steve Edwards sedwards at sedwards.com Voice: +1-760-468-3867 PST

> On Tue, Feb 7, 2017 at 4:47 PM, Steve Edwards <asterisk.org at sedwards.com> wrote: > Now that the g729 patents have expired, how do we use g729 in > Asterisk? > > Will Digium be releasing a g729 codec for 'free' use or do we > download the 'free' codec off the Internet now that we can use it > without moral or legal

Now that the g729 patents have expired, how do we use g729 in Asterisk? Will Digium be releasing a g729 codec for 'free' use or do we download the 'free' codec off the Internet now that we can use it without moral or legal restrictions? -- Thanks in advance, ------------------------------------------------------------------------- Steve Edwards sedwards at sedwards.com

sorry for top-posting, the two topics started with 2 different reason subject, but then we finished on the same problem. btw,the 2 show channel are reported above: the channel with DTMF working kcenter*CLI> core show channel SIP/pbx2-000004b9 -- General -- Name: SIP/pbx2-000004b9 Type: SIP UniqueID: 1467323106.1275 Caller ID: xxxx Caller ID Name: xxxx

Hi, I am having the following issue after upgrading the kernel in a CentOS machine. [root at localhost dahdi-linux-complete-2.7.0.1+2.7.0.1]# make make -C linux all make[1]: Entering directory `/usr/src/dahdi-linux-complete-2.7.0.1+2.7.0.1/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory

Hello, I am getting the following error when compiling dahdi : make[2]: Entering directory `/usr/src/kernels/2.6.32-431.1.2.0.1.el6.x86_64' Building modules, stage 2. MODPOST 0 modules make[2]: Leaving directory `/usr/src/kernels/2.6.32-431.1.2.0.1.el6.x86_64' make -C /lib/modules/2.6.32-431.1.2.0.1.el6.x86_64/build

I'm doing a new install for an old customer. The customer is running a custom version of Asterisk based on version 1.2.7.1. It works for them -- aside from a memory leak requiring a restart once every couple of months... I think the "corresponding" version of Zaptel is 1.2.5, but I'd like to run a bit more modern like Zaptel 1.2.27. Am I just asking for trouble? Thanks in

I'm moving asterisk to a laptop, so can't use the dahdi board. Is there any supported USB dahdi device ? I see the Sangoma USBfxo device, but the dahdi driver no longer supports it. Anything else ? sean