similar to: conference call stuttering / clocking issue (?) - ESXi virtual environment

Hi I had a working system, until recently - its asterisk 1.6.1 from debian - not the lastest as the last doesn't seem to work. but somebody who rang me said my voice mail announcement was all stuttery. so i dialed my voicemail box and its really stuttery... so I have done a reboot and its just as bad, now I am not sure what to check to try and get this working again ..... Alex

I have 2 APC UPS systems, one is connected to my ESXi host and the other to my FreeNAS. The battery for the FreeNAS will run out before the battery for the ESXi, so I need ESXi to shutdown first. If I wait until BatteryLow on ESXI, it will be too late as FreeNAS will have already shutdown. How can I change the configuration on ESXI to shutdown after a small delay so that it is done before

>>> On Aug 2, 2017, at 6:45 AM, Richard Kenner kenner at gnat.com wrote: >>> I wouldn't believe it either. I'd be quite surprised if something won't >>> work with any ESXI version. *Perhaps* there's a configuration issue, but >>> I'd be surprised about that too. There are certain versions of the Linux kernel that have no support under the

Can I combine VMWare ESXi (free version) virtualization and CentOS mdraid level 1? Any pointers how to do it? I never used VMWare before. - Jussi -- Jussi Hirvi * Green Spot Topeliuksenkatu 15 C * 00250 Helsinki * Finland Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hirvi at greenspot.fi * http://www.greenspot.fi

On 2017-08-01 15:48, Doug Lytle wrote: >>>> I am having a very tough time trying to replace an Elastix 2.X >>>> install running as a virtual machine on ESXI 4 > > Licensed or free ESXI? > > I want to say your version is too old. I'm currently running ESXI 6.0 > update 3 at home and Asterisk in a VM under debian without issue. > > Doug The

Hi. On my new job we use VMware ESXi (Free version), but my colleagues use Windows on their PC's. I am allowed to use CentOS Linux, but I have no prior experience with WMVare. I now (today) have to install CentOS 6.x minimal on that ESXi server, so I am trying to wrap my head around whole ecosystem. What should I install on my CentOS 6.x so I can access/manage ESXi server and manage

I am having a very tough time trying to replace an Elastix 2.X install running as a virtual machine on ESXI 4. I tried using the Freepbx 14 ISO that installs CentOS 6 along with Asterisk 13.16 but I keep getting random segfaults: [175711.476685] asterisk[2942]: segfault at 188 ip 00007fc6c41abffc sp 00007fc608575890 error 4 in libasteriskpj.so.2[7fc6c4144000+14c000] I then proceeded

Hi, Dear Mr/Mrs. I have trouble in connecting to a VM ESXi server with python. I am a developer using libvirt to control remote VM ESXi with python language. But I am not able to connect to a remote VM ESXi server. I make my try to solve this issue: 1: I use the function libvirt.Open() to open the remote VM ESXi Server, but I don't know how to input the password. It seems that there is no

Hi all, I am trying to install nested Esxi 6.x under a Centos7 kvm host to use it as test lab for new ESXi versions, but I am doing something wrong because I can't install it. I have configured kvm and kvm_intel modules with the following options: options kvm ignore_msrs=1 options kvm_intel nested=1 ept=1 and I add the following options in <cpu> xml guest file: <cpu

Hello, list, I'm buiding syslinux6.3 with ESXI6.7, but it says, * failed to load COM32 File http://172.16.234.112/images/esxi67/mboot.c32* Here is my config: ------------------ label esxi menu label ESXI-6.7 ^Installer kernel http://172.16.234.112/images/esxi67/mboot.c32 append -c http://172.16.234.112/images/esxi67/boot.cfg -------------------- Seeing from http access log,

Hello nut-upsuser, I'm trying to configure nut to be used with esxi 5.0.0. I have a APC Back-ups xs1300 which im assuming is plugged into /dev/usb0205 but i could easily be wrong. lsusb gives me: Bus 02 Device 05: ID 051d:0002 American Power Conversion Uninterruptible Power Supply I am following the french blog post posted on the nut website under the vmware section. I downloaded the

I have a brand new Dell Poweredge T310 server with 4G ram and 1TB raid-5 hard drive in it. I Really only need to be able to run a copy of CentOS 5.4 on it, but I'm wondering if in the build process should I stick on ESXi 4 and then run CentOS as a vm? This would give me the options to roll out other VM's if I want over the life of the server (which I likely won't need) but the

Hello, I have decided to upgrade my home server by turning it into an ESXi host and have also added an APC CS650 UPS. My plan was to have NUT version 2.6.4 running in a Debian 7.7.0 virtual machine, NUT installed using apt. I configured NUT to run as a netserver, installed the ESXi nut .vib, configured the shutdowncmd in the VM to do nothing, so that the ESXi host would close that virtual machine

Hello, I'm using certtool to generate the server certificates for ESXi - http://libvirt.org/remote.html#Remote_TLS_CA. I just copy the server certificate and key as /etc/vmware/ssl/rui.crt and /etc/vmware/ssl/rui.key. And then use virsh to connect from a CentOS 6.4 VM running on it - "virsh -c esx://<esx IP>. I get the following error - error: internal error curl_easy_perform()

Hello, Has anyone tried running a ESXi guest VM on a XEN hypervisor ? Installation of 5.1 ESXi went through but ESXi VM was not able to recognize the network adapters exported by XEN. Thanks, -vijay _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel

Hi, I have had a VMware ESXi network boot setup for quite some time now. After upgrading from 4.06 to 5.01 (or 5.10-pre3) the network boot fails with the following error: --- snip --- Failed to load COM32 file esxi/5.1.0/mboot.c32 boot: --- snip --- This error is seen for the ESXi bootup only. The default mboot.c32 from syslinux itself doesn't work and this setup has been working with

Hi all, I've been trying out Gluster Platform, so some info will be from the management interface. If additional data from logs is required, please let me know which logfiles. When using a Gluster NFS volume as a ESXi datastore, creation of a disk file (vmdk) takes a considerable amount of time (with unfsd using 10-50% cpu) and then crashes unfsd. A reboot of the system seems necessary to

Hi Daniel, thanks for the reply - The procedure I use is the same as I use for XenServer, and the certificate exchange works just fine. The only thing I'm a bit unclear on, is the location of the CA cert, which in the case of XenServer, I simply put it in /etc/pki/CA. And when I start the libvirtd daemon, it successfully picks it up. If I put the Server key and cert in /etc/vmware/ssl for

I run VMware vSphere 4 Essentials with three almost identically configured ESXi 4.1 hosts and a mix of 32 and 64 bit guests including Windows 2003 and 2008 as well as CentOS 5 and 6. Recently I updated one of the hosts to build 800380. The new build runs Windows and CentOS 5 VMs fine, but CentOS 6 guests won't come up. I tried two different CentOS 6 VMs. Both have the latest standard kernel

On Jan 7, 2015, at 6:11 PM, DatGingerCat <dat.ginger.cat at gmail.com> wrote: > Hello, > > I have decided to upgrade my home server by turning it into an ESXi host and have also added an APC CS650 UPS. > My plan was to have NUT version 2.6.4 running in a Debian 7.7.0 virtual machine, NUT installed using apt. > I configured NUT to run as a netserver, installed the ESXi nut