Syslinux - May 2013 - Syslinux 5.x and VMware ESXi mboot.c32

Hi,

I have had a VMware ESXi network boot setup for quite some time now.
After upgrading from 4.06 to 5.01 (or 5.10-pre3) the network boot fails with the
following error:
--- snip ---
Failed to load COM32 file esxi/5.1.0/mboot.c32
boot:
--- snip ---

This error is seen for the ESXi bootup only.
The default mboot.c32 from syslinux itself doesn't work and this setup has
been working with Syslinux 4.06.

Regards,
Shantanu

On Wed, 15 May, at 10:32:01PM, Shantanu Gadgil wrote:
> Hi,
> 
> I have had a VMware ESXi network boot setup for quite some time now.
> After upgrading from 4.06 to 5.01 (or 5.10-pre3) the network boot fails
with the following error:
> --- snip ---
> Failed to load COM32 file esxi/5.1.0/mboot.c32
> boot:
> --- snip ---
> 
> This error is seen for the ESXi bootup only.
> The default mboot.c32 from syslinux itself doesn't work and this setup
has been working with Syslinux 4.06.
Did you also upgrade mboot.c32 to the corresponding 5.01 (or 5.10-pre3)
version?

Are there are any other messages printed before the "Failed to load.."
one above?

-- 
Matt Fleming, Intel Open Source Technology Center