similar to: ST2030 replacement

Hello, After reading all the docs and going through the menus, I still can't find the voicemail access button or menu sequence on the ST2030 (http://www.voip-info.org/wiki/view/Thomson+ST2030) Also I can't get phone provisionning through tftp to work. Configuration files are loaded but the phone seems to ignore them. Any idea?

Hi all, i'm trouble with codec setup on an asterisk machine 1.4.18 and some Thomson ST2030 as extensions. In the users.conf file for internal extension i have: disallow=all allow=g729 allow=alaw allow=ulaw Without any codec installed (i mean with original g729 of asterisk) all go fine, calling from an extension to one other: Peer User/ANR Call ID Seq (Tx/Rx) Format

hi there, I saw a page on voip-info about the thomson ST2030 phone. There is not so much info on there, that's why I would like to raise a question here. Has anyone got hands-on experience with this phone? (with or without extension module) I am interested if it can be used (as SIP phone) in a good way with asterisk. (also, do all the functions behave like they should; like Supervision

Hello, I'm trying to upgrade a Thomson ST2030 phone froms its default 1.42 firmware to the latest version (1.56) through tftp. The phone loads the .inf file, then the correct firmware file (as stated in the ST2030S.inf), then it reboots and loops doing these same things again and again. The firmware version on the phone stays at 1.42. Is there a special intermediate firmware version to

Can anyone recommend a good cordless user-configurable SIP hardphone that is readily available in the states and doesn't cost $300? There seem to be a plethora of decent and affordable corded phones (like from Grandstream) but the search for a cordless unit seems elusive. I purchased a vtech 8100 online only to discover after receiving it that it is locked to vonage service. Thank you.

Hi, I'm running * 1.2.7.1 on Red Hay 9.0 w/ a TDM 400 2 x FXS, 1 x FXO. I'm using a VTech cordless that makes three short beeps when someone another extension is picked up, presumably this lets you know if someone is trying to listen in.. Everything works, except the VTech now makes the three beeps everytime you try to use it, even if another extension is in use. It seems as though the

Ok, I've done some more research and I don't think I want an FXO box... What I'd like to do is use BroadVoice (with their BYOD plan) and then run Asterisk on my WRT54G router. I'd also like to use my regular home phones without having to use a special "SIP" phone... (eg. I like my Vtech normal cordless phones) What do I need to buy to get this working? It sounds like I

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

Most of the time i can find answers to my questions on the wiki, google, or searching the list now i am stuck . I have a small * box at my house running 1.0.9 stable and a devlite kit. Every thing is awesome VM, IVR, Echo canceling, and Meetme are all working great. But on Incoming caller id i need to add a 9 as a prefix to make it easier to return call from my cordless phone (cheap vtech

Basically, pretty much all the 2 line cordless systems I've seen come with a built in digital answering system that I'll never use, the main problem with this is that these units don't support VMWI (visual message waiting indicator) with telco supplied voicemail. This is a problem because I'll be setup an Asterisk system in the next month or so to handle my 2 analog and 1

Hi all, I was excited to see the announcement on the list regarding the fix for the echo problems on Digium FXO cards! I have 2 X101P's, TDM400P with 4 FXS modules and couple of XLite softphones. A few months back,I had gone thru the recommendation on the list to remove echo from the SIP phones(I never did have any echo on the TDM400P FXS phones), and had removed about 90% of the echo.

I have Asterisk voice mail setup locally. It works great, I'm impressed! Some details about my system: I'm using a TDM22B card to interface with both the PSTN and a VOIP provider. I'm running 1.2-beta from CVS. I have a regular VTech phone plugged into one of the FXS ports. Asterisk is able to indicate when a local voicemail message is waiting via the LCD display of my analog phone.

Hi, I'm having trouble getting caller*id to appear on my phone connected to an ATA186, and being called from Asterisk. Does anyone out there successfully see callerid on their ata186-connected phone? The "From:" header in the INVITE to the ATA seems to have the "right stuff" - eg From: "Study phone" <sip:6002@195.217.255.45:5062>;tag=as412db061 But

does anyone know of a 2.4 or 5 ghz cordless phone system that has an ip base station? thanks

In that example you could make outgoing calls only correct? (since incoming likely needs port forwards) I guess the questions becomes "how often are you going to do that to justify the extra $100 or so you going to pay for a wifi sip phone?" Paul Fielding (paul.fielding@shaw.ca) wrote: > > I think some people are missing the point. You can't throw your cordless >

Anyone got any pointers on where to find USB handsets or headsets that can be used as the audio device on a softphone? Later..

Hello list, I'm observing what I believe to be inconsistent behaviour regarding "Newstate" AMI events for the "Ringing" state. As such I come to you asking for experience or advice: am I wrong or should I file a bug ? I present you a short introduction which I feel is relevant; however, if you want to go straight to my technical question, please scroll

Hi all, I am looking for phones witch support POE, with a good relation between quality and price to work with asterisk. I just see the Thompson st2030 and the Linksys SPA 922 an SPA 942. Witch of this phones or another ones gave you the best results in a productivity enviroment? Thanks in advance. VoipCrazy. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Is anyone aware of SIP Diversion header ? It seems currently supported by Comverse (formely NetCentrex) softswitch and some hardphones (Thomson ST2030). An old draft (draft-levy-sip-diversion-08.txt) mentions this header. ha I'm wondering if this could be used -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, First of all I wanted to give my salutations to everyone in the list. In second hand, let's see if anyone may help me with a problem i've got. I bought a Developer Kit from Digium (TDM11B + ST2030 + Asterisk book) I installed a new server over Asterisk@home with the card plugged in it. Everything during the installation went fine. Now I connected the