similar to: outbound calls

I am making some assumptions, but assuming the 217.195.xx.xxx is your provider, you are getting this back from them: "Got SIP response 556 "No address found" back from 217.195.xx.xxx:5060" Are you sure that "0033149xxxxxx" is the format the provider is expecting? You might try enabling SIP debug on the 217.195.xx.xx IP and seeing what the INVITE looks like, but

thanks for your response i noticed that when i active the voicemail in the IP-phone where the number 0033149xxxxxx is configured i can call this number without issue the server asterisk and the ip-phone where the number is configured are in the same network 192.168.1.X Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Called SIP/FD/0033149xxxxxx == Begin MixMonitor Recording

hello list, i have asterisk 11.15.0 and i have some trunks sip from my provider we have some ip phone astra 6731i each Ip-phone is configured with trunk and we call no ihave configured another trunk from the same provider in my asterisk i can call all numbers just the numbers are configured in thses ip phones. but when i configured the same trunk in x-lite i can call theses ip-phones without

You would need to give more information really. Your sip.conf file listing the entries for the phones especially which codecs are permitted. A copy of the 'asterisk -rvvv' console output when you make the call. On 27/03/15 17:05, Salaheddine Elharit wrote: > please no body has som with aastra can help me in this issue > > 2015-03-26 11:02 GMT+00:00 Salaheddine Elharit >

Hi All, I am trying to connect my asterisk box with freepbx to PSTN. I have purchased x100p FXO card and installed in my asterisk server. My freepbx detected the x100p FXO card and i can see the card specific details in command line. I have configured the following things. 1. OUTBOUND caller id and Dialing rules in Freepbx. 2. INBOUND route When i call to the PSTN number before

hi,all when i send a call to other server use SIP trunk, i got this below, <--- SIP read from 222.46.18.52:5060 ---> SIP/2.0 403 Forbidden what's rong with is? > Asterisk 1.4.21.2, Copyright (C) 1999 - 2008 Digium, Inc. and others. > Created by Mark Spencer <markster at digium.com> > Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for

Hi All, I have searched the various post and not able to find the solution. I am using Asterisk 1.4.21.2 for outgoing calls. Earlier i used ZAP trunk and it works fine. Now i need to move to SIP trunk and configured the same. When i try from softphone i got error as "Call rejected" and in the asterisk i got error as

i have a prablom here, i want to send a call from A to B use sip trunk , the call can sended B,but not work to PSTN. the message from B server. help pls,what's rong? > > <--- SIP read from 192.168.0.176:5060 ---> > INVITE sip:15921256331 at 192.168.0.151 <sip%3A15921256331 at 192.168.0.151>SIP/2.0 > Via: SIP/2.0/UDP 192.168.0.176:5060;branch=z9hG4bK51a51b96;rport

Hello everyone! I've had this problem for a while and cant figure it out. When an outside caller calls an extension on my asterisk system, they do not hear any sort of ringing. Inside extensions calling other extensions do hear ringing. We have 3 other asterisk systems that are configured the same way, but do not have this problem. We think it has something to do with asterisk 1.6. The other

tnaks for your response but the number dialed exist and i can call this number when i configure the trunk directly in x-lite and i call call also this number from my cell phone . any help thanks and regards 2015-03-25 12:59 GMT+00:00 Matthew Jordan <mjordan at digium.com>: > On Wed, Mar 25, 2015 at 7:35 AM, Salaheddine Elharit > <salah.elharit200 at gmail.com> wrote: > >

On Wed, Mar 25, 2015 at 7:35 AM, Salaheddine Elharit <salah.elharit200 at gmail.com> wrote: > hello list, > > i have asterisk 11.15.0 and i have some trunks sip from my provider > > we have some ip phone astra 6731i > > each Ip-phone is configured with trunk and we call > > no ihave configured another trunk from the same provider in my asterisk > > i can call

thank you for your response below the asterisk -vvvr Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Executing [0176XXXXXX at from-internal:1] Macro("SIP/300-00000192", "user-callerid,LIMIT,EXTERNAL,") in new stack -- Executing [s at macro-user-callerid:1] Set("SIP/300-00000192", "TOUCH_MONITOR=1427481319.470") in new stack --

I just had a user report that they called out to someone on a cell phone this morning, and after a short conversation, the call was dropped/lost. The person on the cell phone says that this is very rare, and would not suspect the dropped/lost call to be on their side. I have looked at the asterisk/full log as thoroughly as I can, and have pasted the lines which seem relevant to that call below.

I am trying to record calls on demand both inbound and outbound calls. I can record outbound calls just fine but not inbound calls or calls from an internally between extensions. I am using the latest asterisk 1.8.x certified version. On an outbound call I see: == Using SIP RTP CoS mark 5 -- Called SIP/ BVTrunk /7190000000 -- SIP/BVTrunk-00000163 is making progress passing it to

I am trying to tweak my dial plan and I am running into a problem. Sometimes my VoIP out bound calls do not complete on overseas calls(busy or just a hang-up). Is there a way in the dial plan to automatically dial out of my PRI when something like this happens. Either by time limit by a failure event? Any point in the right direction would be great Thanks, CLI output (cleansed to protect the

What is involved in provisioning Asterisk to use a multiline analog service from our local telco? I will only have one twisted pair entering in on a OpenVox card but am not sure how Asterisk interprets and deals with two incoming calls and/or two outgoing calls? Thanks! jlc

Hi: I am useing asterisk 11.12. I use G722 as preferred codec for my ip-phone. and my PSTN DAHDI use alaw. G722 is great when ip-phone talks to each other. but when ip-phone dialout to PSTN DAHDI, G722 is not great, since it is need to transcode to alaw. so I try to change the codec when dial from SIP to DAHDI. I tried to use IP_CODEC/SIP_CODEC_OUTBOUND at dialplan. but the SIP

Hi All, I have registered "abhijit" for SIP in asterisk Server. I am able to register my softphone (SJPhone) to the server using the name "abhijit". But whenever I try to make any calls I am gettinh the following error message:- *CLI> -- Registered SIP 'abhijit' at 172.20.28.85 port 5060 expires 120 May 26 07:34:52 NOTICE[2761]: pbx.c:1738 pbx_extension_helper:

Hi this message give me when I calling a number than actually not busy: "Dial failed due to trunk reporting BUSY - giving up" max channel is unlimited and sometimes it dial number ok but most of the time it gives me this error. Please inform me how can solve this problem. thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, We are using VOIP-SIP gateway to route outbound PSTN calls. Recently, I am getting == No one is available to answer at this time message, after making 5 SIP attempts (Retransmitting #5 (no NAT):), and the calls are going out through alternate Zap-trunk. I do not see any hit (sip-debug traffic) on the voip-gateway for the failed calls. Strange thing is that this is happening randomly,