similar to: [PoE] Avaya 1152a1x

Hi, folks: I just took delivery of new PoE cables (PN 2200-11077-002) for our Polycom phones here in the office. I have the following to report, for the erudition of existing Polycom users and those considering purchasing Polycom sets from the set of models noted in the subject: 1. The cables do indeed work (hooray). 2. The cable has a module on it about a third of the way from a female end.

Hey guys, I was wondering what POE solutions are being used ? Ive done some searching on google and found that PowerDsine seems to be good brand. Any comments,suggestions, and experiences on POE hubs other POE products would be greatly appreciated. Thank you, Steve Maroney

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Are any versions of the Cisco 7940/7960 or 7940G/7960G phones compatible with the 802.4af Power over Ethernet Standard? Ok, I know the question has been asked before, but googling has turned up several contradictory results: 1/ No - not at all 2/ Maybe - 79XXG will work 3/ With a special cable/dongle (a la wikki) I am looking at getting

I am hoping that someone has had better luck with this than I have. I would like to connect Cisco 7940s and 7960s to the Netgear FS116P, and take advantage of its POE. I know that the Cisco phones use Cisco's "pre-standard" POE implementation, but as I understand it the difference is really only two pins. I bought a bunch of PowerDsine inline power adapters which supposedly change

I need to connect up to sixteen phones per building, I can use a cheap hub, but POE would be useful. Is there a cheap POE hub available? Everything I have seen has been expensive. Chris Mason

Hi, Do you need a special cable and power for that unit or you can run it of PoE Switch? Thanks. robert

I'm looking for 24 or 48 port IEEE802.3af POE injector. Any recommendation? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070720/3886655b/attachment.htm

Hello; We have a cisco switches but they are not PoE and we need only to have PoE device so the cables come for it first to provide the power and then goes to the switch (to be like batch panel), is there something like this that can be used for the IP Phones? Regards Bilal -------------- next part -------------- An HTML attachment was scrubbed... URL:

Based on several threads I've read on this list, I assume that it would be handy to supply POE (power over ethernet) in an environment without having to purchase POE switches (assumed expensive) and abandon one's existing (familiar/custom/not-yet-expensed/etc.) switches/hubs. Assume I have a non-POE switch with 24 RJ-45 (ethernet) ports. I design a 1U box that can be mounted just

Hi: I have a Sangoma A200 card installed in a server with two FXO modules and one FXS module. Analog sets connected to the FXS module have a "squeaky static" -- it's like static mixed with the sound of someone vigorously cleaning a window a few doors down. In other words, it's not a classic static noise, but it is noise, and it's distracting. Remote callers can hear this

https://bugzilla.mindrot.org/show_bug.cgi?id=2116 Bug ID: 2116 Summary: SSH to Nortel/Avaya switch fails Product: Portable OpenSSH Version: 6.2p1 Hardware: All OS: All Status: NEW Severity: major Priority: P5 Component: ssh Assignee: unassigned-bugs at mindrot.org

After palying around to set this correctly (or so I think, please correct me if I got something wrong) I decided to share it with everyone. For Polycom phones in sip.cfg change the following line from: <SNTP tcpIpApp.sntp.resyncPeriod="86400" tcpIpApp.sntp.address="" tcpIpApp.sntp.gmtOffset="" tcpIpApp.sntp.daylightSavings.enable="1"

Tried to submit this email this morning and didn't see it in the list. I apologize if it is a dupe. I've inherited a customized Asterisk installation. After the past time change all clocks in my office are behind by one hour. After some digging it appears we have: A /tftproot/sip.conf that is being pushed out to our phones. I found the following line that seems to be what controls

2014-02-26 1:45 GMT+01:00 Jason R Begley <jayray at digitalgoat.com>: > Sorry, I just now figured out how to get a usable output. > -Option one doesn't work at all for me. > > snmp_build: unknown failuresnmpget: Error building ASN.1 representation > (Can't build OID for variable) > COUNT = 0 / 0 > Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h > Creating

I have a polycom 501 phone that is 1 hour off now. Before last sunday (time change) the time was fine. <?xml version="1.0" standalone="yes"?> <PHONE_CONFIG> <OVERRIDES _.0x20._log.level.change.sip="0" tcpIpApp.sntp.daylightSavings.stop.date="4" tcpIpApp.sntp.daylightSavings.stop.month="11"

Sorry, I just now figured out how to get a usable output. -Option one doesn't work at all for me. snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h Creating /usr/share/snmp/mibs/ups-mib.txt-mib.c Done. -Option 2 is attached. I ran the following to get the output. snmpwalk

Just a hunch about your snmpwalk, what happens if you format like this? snmpwalk -l authpriv -v 3 -u user -a MD5 -x DES -A authpassphrase -X privpassphrase {host address} so snmpwalk -l authpriv -v 3 -u nut -a MD5 -x DES -A NutScan at Password43LongerWord -X NutScan at Password43LongerWord apcups Thank you, David Zomaya Tripp Lite ________________________________ From: Nut-upsuser

Hi all, I'm looking for recommendations on ethernet switches for a new install. Ideally would want switches with at least 24 ports, ideally with a GE uplink, and that support PoE (power over ethernet) on every port. I've seen lots of switches, and lots of "power hubs", but the combination, which makes a lot of sense, seems rare. What is out there? Do the switches need to be

[Please keep the list CC'd. Thanks!] On Feb 13, 2014, at 4:55 AM, ??? ????? wrote: > Can you try adding "-v 1" to the snmpwalk command? If that works, we can add it to gen-snmp-subdriver.sh. > > Yes, I tried it before, ran command "snmpwalk -v 1 -On -c public 10.200.254.39 .1.3.6.1.4.1.935" > > Output: > .1.3.6.1.4.1.935 = NULL > Error: OID not

Greetings, I mailed the list regarding an intercom system some months ago and we came to the conclusion that I should purchase a Polycom 501 phone. I'm now considering the purchase for this year, and I'm now wondering between the Polycom 501 and the 320 for the intercom. I don't need the spare ethernet on the phone because I would like to have my voice network separate from my