similar to: Asterisk 13.1.0/PJSIP outbound calling using SIP trunk: Unable to create request with auth.No auth credentials for any realms in challenge.

That was the issue, thanks. I now am able to get the caller ringing on an outbound call, but an external phone number (E164) I am dialing does not ring. On Sun, Mar 15, 2015 at 12:19 PM, George Joseph <george.joseph at fairview5.com > wrote: > > > On Sun, Mar 15, 2015 at 8:32 AM, Sonny Rajagopalan < > sonny.rajagopalan at gmail.com> wrote: > >> I have setup my

Yes, I think the dial does get executed (sonny calling outbound 202-555-1212): core set verbose 3 Console verbose was OFF and is now 3. -- Executing [912025551212 at from-internal:1] Log("PJSIP/sonny-00000031", "NOTICE, Dialing out from "" <sonny> to 12025551212 through fromgw") in new stack [Mar 15 19:27:06] NOTICE[16648][C-00000022]: Ext. 912025551212:1 @

On Sun, Mar 15, 2015 at 8:32 AM, Sonny Rajagopalan < sonny.rajagopalan at gmail.com> wrote: > I have setup my Asterisk 13.1.0 server with PJSIP on AWS/EC2. My basic > configuration works, and I am connected to a SIP trunk using SIP.US, and > have set up my inbound calling which works correctly (when I call my PBX > DID, the call does come into my PBX network). > > The

On Sun, Mar 15, 2015 at 10:34 AM, Sonny Rajagopalan < sonny.rajagopalan at gmail.com> wrote: > That was the issue, thanks. I now am able to get the caller ringing on an > outbound call, but an external phone number (E164) I am dialing does not > ring. > Any error messages? If you set 'core set verbose 3' and try it, does the Dial get executed? > > On Sun, Mar

On Sun, Mar 15, 2015 at 1:33 PM, Sonny Rajagopalan < sonny.rajagopalan at gmail.com> wrote: > Yes, I think the dial does get executed (sonny calling outbound > 202-555-1212): > > core set verbose 3 > Console verbose was OFF and is now 3. > -- Executing [912025551212 at from-internal:1] > Log("PJSIP/sonny-00000031", "NOTICE, Dialing out from

I have a working Asterisk 13.1.0 running, and I am trying to configure a SIP trunk for outbound and inbound calling, and a DID for the Asterisk server, which is used for incoming calls from PSTN. I configured my SIP.US trunks (showing one gateway, gw1, here for brevity, have two: gw1 & gw2, which are both configured on my end): [sonnyGW1] type=registration transport=transport-udp

Hello, I have had numerous issues with PJSIP outbound calling in Asterisk 13.1.0 and SIP.US SIP trunk. My Asterisk server is on EC2 and I have opened up the appropriate ports. The SIP clients can be anywhere on the Internet, including behind NATs. I am able to get to my Asterisk server's internal extensions via the DID (and appropriate dialplans) but I am not able to make outbound calls to

Oh, wow! Changed it and now I am getting calls into my context (fromgw). Unfortunately, the actual caller ID (6175551212) is not getting passed (but I know Asterisk is getting this). How do I "reap" this actual caller ID in my dialplan? On Fri, Mar 13, 2015 at 4:55 PM, Joshua Colp <jcolp at digium.com> wrote: > Sonny Rajagopalan wrote: > > <snip> > >

On Sun, Mar 15, 2015 at 5:56 PM, Sonny Rajagopalan <sonny.rajagopalan at gmail.com> wrote: > George, > > I have the detailed log below. (Resending after trimming the email to 40KB.) > > The sequence below just repeats ad-nauseam. Is this a SIP trunk issue? > > Thanks! > I don't see anything obvious. The registration works though, right? You might want to compare

Sonny Rajagopalan wrote: <snip> > [sonnyGW1] > type=identity > endpoint=sonnyGW1 > match=65.254.44.194 You want type=identify, not type=identity. Cheers, -- Joshua Colp Digium, Inc. | Senior Software Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - US Check us out at: www.digium.com & www.asterisk.org

George, I have the detailed log below. (Resending after trimming the email to 40KB.) The sequence below just repeats ad-nauseam. Is this a SIP trunk issue? Thanks! --------------------- Transmitting SIP request (885 bytes) to UDP:65.254.44.194:5060 ---> INVITE sip:12025551212 at 65.254.44.194:5060 SIP/2.0 Via: SIP/2.0/UDP 18.18.19.123:5060

Hello, I am looking for documentation support for enabling instant messaging between endpoints using Asterisk 13.1.0 and vanilla VoIP clients such as Zoiper. Where do I enable this support on the server side and does it need anything on the client side? I see plenty of online help for chan_sip, but nothing for chan_pjsip. I imagine there is both pjsip.conf configuration and extensions.conf

So, the only thing that is needed in the endpoint definition in pjsip.conf (there is no such file pjsip.endpoint_custom.conf) is *message_context=astsms* Is that correct? Anything I need to do in extensions.conf? I see that the messages are received at Asterisk (when I turn on pjsip set logger on) but they are not delivered to the other endpoint. What gives? Any help appreciated. Thanks! On

Thanks again. How do you create that message context in extensions.conf? On Mon, Nov 16, 2015 at 9:44 PM, Thyda ENG <engthyda at gmail.com> wrote: > According to what I have done , I add the message_context to the > pjsip.endpoint_custom.conf in /etc/asterisk and then I create that > message_context in the extension.conf, and it works. > > On Tue, Nov 17, 2015 at 9:34 AM,

Yes, it is enabled on port 5060. I do receive a TCP ACK back from the server, so I know the TCP segment is received at the server hosting the Asterisk build. On Wed, Feb 17, 2016 at 8:36 AM, A J Stiles <asterisk_list at earthshod.co.uk> wrote: > On Wednesday 17 Feb 2016, Sonny Rajagopalan wrote: > > OK. Let me ask this. Is anything else necessary, except choosing TCP as > the

Hello All, I have an Asterisk server v13.1.0 running on EC2 and I am able to connect and register SIP devices and "see" them on the asterisk CLI. I am also able to place calls, but I am not able to hear any audio on either end after the call is picked up. I was wondering if you can tell me what a minimal configuration for Asterisk on EC2 looks like. My current pjsip.conf configuration

Thanks George, for your mighty quick response. I made the changes (re: server_uri_pattern etc.) and still, no luck--it fails for the same error. BTW, there is nothing for transport (but this is the same config from my SIP/UDP + Twilio days, which worked): *CLI> pjsip show transport twilio-siptrunk Unable to find object twilio-siptrunk. *CLI> pjsip show identifies No objects found. I did

Hello, I have an Asterisk 13.6.0 PBX using PJSIP connected to the Twilio gateway. I am able to make calls outbound through the gateway, but I am not able to make calls into the PBX from external PSTN. Specifically, an incoming call is _received_ by Asterisk, but it is not able to route the call internally owing to the following error: [Feb 18 21:08:47] NOTICE[4606]:

On Wed, Feb 17, 2016 at 8:56 AM, Sonny Rajagopalan < sonny.rajagopalan at gmail.com> wrote: > I made some progress. The first thing I have realized is that it is my > Twilio configuration in pjsip_wizard.conf that was killing me. I have since > removed that entire file from /etc/asterisk and I am able to make > "from-internal" context calls (i.e., calls that do not

Thank you for your note, Scott. I set rewrite_contact=yes for both contacts, and I also had to do remove_existing=yes because I had to remove the existing contact information (max_contacts = 1 was preventing new contact information) using pjsip qualify demo-alice etc., after which the right IP addresses showed in pjsip show endpoints. Anyway, it works as expected now, I think. My pjsip.conf is