similar to: Disable fax detect on specific incoming DID

The easiest way is to just run the Dial() command to forward the call to the hard fax without ever Answer()-ing the call. Without an Answer() on the call, Asterisk can't listen for fax detection (because the call hasn't been set up and there is no audio leg yet). Thank you, Noah Engelberth -----Original Message----- From: asterisk-users-bounces at lists.digium.com

We have a recently deployed server with a new TDM2400 card that will not put dialtone or audio on FXS ports after the physical server restarts (though they will ring if called, there's just no audio on the line if the phone at the other end picks up). The symptom can be resolved by stopping Asterisk, restarting DAHDI, and then restarting Asterisk. So far, this has happened on both times the

On 11/01/2019 09:19, Administrator TOOTAI wrote: > Le 11/01/2019 à 10:12, Neil Youngman a écrit : >> A while back, I posted about detecting when a call was picked up by a >> fax machine. It was suggested that having a "fax" extension and >> "faxdetect=yes" would cause it to jump to the "fax" extension. This >> was not something I could

I'm trying to set up a way that our users can send an XMPP message to Asterisk (unsolicited) to request information, such as voicemail status or the like. No matter what I set for the dialplan, I'm only seeing Asterisk execute the s,1 priority in the context defined in xmpp.conf for incoming messages, and then the "call" hangs up without executing further instructions. Anything

I solved the issue by not answering the call as I assume others have done. -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Administrator TOOTAI Sent: Wednesday, February 18, 2015 12:50 PM To: asterisk-users at lists.digium.com Subject: Re: [asterisk-users] Res_fax - FAXOPT(faxdetect) Hello Le

Hi, as stated in the documentation, it's allowed to set FAXOPT(faxdetect)=yes/no to allow fax detection. It's done (see below) but still fax detection :-( Extension 300 is hylafax with iaxmodem. On the upper Asterisk gw it's the same, despite the faxdetect set to no we also have the NOTICE of T.38 re-INVITE. Test is done with a mobile phone calling the 0123456789 PSTN number.

I'm running an AsteriskNow V1.7.1 with both a PSTN connection and fax machine. Both are connected to a DAHDI board. I'd like to route incoming PSTN fax calls to the extension of the fax machine and process non-fax calls through different dialplan.logic. What's the best way to go about doing this? I've looked into Fax for Asterisk, bit I'm not sure that I want it or NVFax

I am having difficulties with customer-bound DTMF being very short & clipped off (and basically unusable, as systems on the customer side aren't recognizing the DTMF digits, and I can barely tell that DTMF is there when I listen on a handset). My system set up as follows: PSTN <--> Metaswitch <-SIP-> Asterisk <-SIP or IAX2-> CPE Asterisk is running Asterisk 10.4.0 on a

Hi, I'd like to know what's the most "popular" method for automatic fax/voice detection for incoming calls on mISDN cards such as the B410P (hfcmulti). I'm running: kernel 2.6.17 misdn 1.1.3 asterisk 1.4.21.2 B410P card I'm using iaxmodem and hylafax with asterisk (the setup works for zap channels). I've used the following options in /etc/asterisk/misdn.conf:

I've been working on an interactive XMPP interface so users at my office can interact with the timeclock and queues by XMPP (in addition to IVR menu, which has been running just fine for quite a while before the XMPP interface). I'm using sendtodialplan=yes to handling the incoming unsolicited messages, and typically will have at least one point of interaction where Asterisk requests

A while back, I posted about detecting when a call was picked up by a fax machine. It was suggested that having a "fax" extension and "faxdetect=yes" would cause it to jump to the "fax" extension. This was not something I could get to work. I have now created a very simple example. In sip.conf I have "faxdetect = yes". My example extension is: [test]

I run a hotdesking system based on the example from Asterisk: The Definitive Guide. Calls come into the [hotdesk] context, which verifies the phone has a logged in user and sends the call to users,${EXTEN},1 if there is a user logged in. The [users] context then includes several other contexts for internal/external call handling, as follows: [users] include => internal include =>

I've been tasked with finding and implementing a CDR/Queue analyzer to provide information to management about the call center's performance. My Google-fu seems to be returning a lot of things that are more or less abandoned projects. Does anyone have any recommended solutions for a CentOS 6 / Asterisk 10 "vanilla" server? Not opposed to something commercial, provided it

In testing Asterisk 11, I've found that Asterisk doesn't seem to be sending BLF updates to SIP peers that have subscribed to a hint looking at a Custom device if that Custom device state is RINGING or RING_INUSE. All other states seem to be working correctly. The hint section of the dialplan is: [hints] exten => _3XX,hint,Custom:${EXTEN} Console shows the following for core show

Hello All, I am experiencing some intermittent problems with calls coming inbound on my DID trunk. I have 12 DIDs that come into an Adtran 750. From there T-1 to a port on T400P. The problem is that some calls that come in don't seem to bridge properly. Heres what happens. Call comes in on Trunk. Call Routed to correct Zap Channel. Phone Rings. Person Answers phone, but hears nothing but

Is there a way I can change the ring cadence on FXS lines on a system using a Digium Wildcard TDM2400 card? I recently deployed a new phone system, and the customer has a few POTS phones in areas where they don't have data network services, so we're using the FXS lines to provide dialtone at those outbuildings. The old phone system would ring those phones with a short ring-short

Anyone have any testing experience with T38 and HT-502 Grandstream? I just want to confirm that t.38 is working on this device. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110801/fea18d8c/attachment.htm>

Hi, I'm putting together a fax solution for my company that utilizes T.38. I wanted to throw out my plan and get some feedback if anyone is doing something similar or sees a blatant problem with it. We're currently rolling out SPA-942 phones for the standard desk phone with vanilla Asterisk 1.4.15 (just upgraded it today) on the back end. Most calls for satellite offices are handled by

I've been spending the day trying to get IMAP_STORAGE on my test box, to evaluate for production, but I'm having no luck getting uw-imap to build. I've tried installing it from an upstream package, but Asterisk still isn't finding it to compile -with-imap. My google searches have turned up very little for documentation on dependencies, gotchas, etc for either item, so I'm

Hi, I have 2 servers: one is running 2 B410P cards with 8 euroisdn lines (mISDN) connected on it, everything runs fine. I prepare a new server - HP 360 G8- with 2 HA8 cards each of them 1 module of 4 lines. Already had with this machine an RMA on both cards as they was faulty and crashed the server. What happends is that when I connect cables on the HA8 modules (those cables are unpluged