similar to: status - Unmonitored, how to change it

Put qualify=yes in the peer definition in sip.conf -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joseph Sent: Tuesday, December 30, 2014 1:59 PM To: asterisk-users at lists.digium.com Subject: [asterisk-users] status - Unmonitored, how to change it How to change status of peers "Unmonitored"

We have a problem with our iaxclients. Our asterisk runs on a public host with debian and many of our IAX2 clients are natted. The iax.conf looks like: [23456] accountcode=123 type=friend context=user auth=md5 secret=xxxx username=23456 callerid=Testuser 1 <23456> notransfer=yes host=dynamic The cli command IAX2 show peers shows all clients as unmonitored CLI> IAX2

hallo all, i would like to know, as i would suspect, nativ bridiging should work also, if only one iax party is behind an nat router and the other has a public ip. when i connect to iax clients, which have both pubic ip's nativ bridging is working. if one of the clients is behind an nat, the iax2 channels always get routed through the asterisk server (latest stable version from cvs) ?? i

> On Jan 2, 2024, at 23:17, thelma at sys-concept.com wrote: > > On 1/2/24 15:13, asterisk at phreaknet.org wrote: >>> On 1/2/2024 4:03 PM, thelma at sys-concept.com wrote: >>> I'm using asterisk-16.30.1 >>> >>> When I try to call another asterisk server over IAX I get a busy signal, >>> >>> chan_iax2.c:4739 __auto_congest:

Hi all, What does (T) mean on the output of "iax2 show peers"? The following my output. darkstar*CLI> iax2 show peers Name/Username Host Mask Port Status ronaldo (Unspecified) (D) 255.255.255.255 0 UNKNOWN sp/ata 201.26.67.102 (S) 255.255.255.255 4569 (T) UNKNOWN 2 iax2 peers [0

Hi, all. The asterisk setup is working fine, receiving calls via broadvoice "initially". ? When call comes in via broadvoice number, asterisk picks it up and routes correctly, as long as the call came in within ~2 min from the previous one. In other words, as long as a call comes in within ~2 min since the previous one, asterisk will answer the call. However, if the call comes in

Hi everybody, I am trying to register my softphone(twinkle) on an asterisk server. Everything seems to be fine. Here is the output on show registrations in twinkle: Tue 18:57:51 nikhil: you have the following registrations <sip:2001 at 172.26.48.208 <sip%3A2001 at 172.26.48.208>>;expires=3013 208 is ip of the asterisk server. on the server on doing 'sip show peers' , it

Dear all, I have an asterisk sip issue which I don't believe is unique. I use a registrar (sipgate.co.uk) where I have 3 different accounts. These accounts provide me with three seperate local phone numbers which allow me to allocate them to seperate users. By using just one of these accounts I can set asterisk up to send and receive calls no problem. However, when I start to introduce an

I've searched the lists but I didn't find anything exactly like this. I have two Grandstream BT101 phones connected to an Asterisk. Periodically, for reasons that I can't determine, one or the other (or both) of the BT101s decide(s) to go on permanent busy. Dialing that phone gives: -- Executing Macro("SIP/24567-7856", "dialphone|SIP/27654") in new stack

Hi My first post get no answer :=<, i post new with new elements. I have two Asterisk server, running on Asterisk 1.6: SRV1 = 192.168.0.5 on Asterisk 1.6.1.4 SRV2 = 192.168.0.20 on Asterisk 1.6.1.8 I want create a link for exchange call. on Srv1: iax.conf: [general] bindport=4569 bindaddr=0.0.0.0 language=fr bandwidth=low jitterbuffer=no forcejitterbuffer=no autokill=yes

Hi people, pls does anybody know what "(T)" and "(D)" letter means? server3*CLI> iax2 show peers Name/Username Host Mask Port Status SERVER1 xxx.xxx.xxx.xxx (D) 255.255.255.255 9785 (T) OK (29 ms) SERVER2 xxx.xxx.xxx.xxx (D) 255.255.255.255 4569 OK (95 ms) 2 iax2 peers [2 online, 0 offline, 0

I've got 4 Cisco 7960's and they're behind a firewall (sonic wall). The asterisk box is on a WAN connection on the other end of a DS3, the phones connect fine to the Asterisk server as you can see from the output of show sip peers below. tp3/tp3 <firewall-ip> D N 255.255.255.255 60665 Unmonitored tp2/tp2 <firewall-ip> D N

I can cut and paste the log file from a reload right now, and provide you with the other information when I get home after work: tmp*CLI> sip debug SIP Debugging Enabled tmp*CLI> reload Mar 21 14:52:42 NOTICE[23231]: indications.c:397 ast_unregister_indication_country: Removed default indication country 'us' 11 headers, 0 lines Reliably Transmitting: REGISTER

Hi All I'm trying to get two Asterisk servers to talk to each other using IAX(2). I've read the WiKi and the docs and tried the examples..... I can't get it to work (I have 2 x 7960's registering on one server and 1 x 7960 registering on the other). I've set them up as follows... The two servers are set up as friends and have consecutive IP address's. The setup is

Hello sip show peers does not mark hosts as NAT even though sip.conf and sip_peers table has nat=yes. spitfire*CLI> sip show peers Name/username Host Dyn Nat ACL Mask Port Status voipuser.org/gdsm 216.127.66.119 N 255.255.255.255 5060 Unmonitored 5560/5560 192.168.4.5 D N A 255.255.255.255 5060

hi list, I'm running a newly installed asterisk@home an i registered two soft phone. both soft phone are registered 8901/8901 x.x.x.x D 255.255.255.255 50710 Unmonitored 8900/8900 y.y.y.y D 255.255.255.255 6281 Unmonitored but when I call one another, they are always busy and directed to its voicemail Sorry, if this was posted before TIA

Hello Everyone - Well, I think I'm getting closer with the asterisk connection. This is my setup and I keep getting this error below in ,my /var/log/asterisk/messages file. I have opened 5060 port on the firewall box. I would this is Warning which I can ignore! But I see the connetcion coming but NO DIAL TONE on mt ata186 box sitting in my 192.168.200.x site! I'm using ATA186(cisco

I have a small HUGE problem with *. I have installed * but I have 2 problems. 1 - Making call to FWD. 2 - Receiving call from FWD More info of the problem at the end. Here is the sip.conf file. ; ; SIP Configuration for Asterisk ; [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = sip ;default Default for incoming calls register =>

Hi everybody, I am testing Optipoint 400 Standard SIP (Firmware 2.3.14) with Asterisk. It is posible to dial from another Phone (x-lite) to the Optipoint, but when I try to dial from the Optipoint there is no dialtone and there is only a short beep when I dial Numbers. The Optipoint shows "no Server..." (Registrar?) in Display. Sip debug shows no unusual (to me) Messages. Sip show

Hi, I've have followed through the help docs in trying to get an initial setup going with two phones and the asterisk server. Firstly, all I'm trying to do is get the two phones actually talking to one another VIA asterisk.. I've added this to sip.conf: [phone1] type=friend host=dynamic defaultip=192.168.1.106 ;username=blah ;secret=blah dtmfmode=rfc2833 ; Choices are inband,