similar to: No subject

Asterisk 1.4 We are experiencing an issue on transfers where no progress tones are heard by the caller: 1. Call from 1593 (SPA525G 0026998D2FFFF) to 1595 (SPA922 000B820AFFFFF). 1595 answers 2. From 1593 initiate transfer to 1597 (SPA508G 1CDF0F4AFFFF). 1595 hears MoH. 3. 1597 starts ringing and 1593 presses transfer again. MoH stops but 1595 hears no ringing When xfer is pressed and the

Arch = x86_64 OS = CentOS-6.4 (freepbx) Asterisk = 11.4.0 FreePBX = 2.11.0.2 We use Snom870 handsets with firmware v.8.7.3.19. I am trying to develop a custom dial plan to invoke a distinctive ring-tone when an external call is transferred internally. Based on an earlier solution I discovered I am attempting this: [from-internal] include => set-alert-if-local [from-internal-original]

I wanted to post this to everyone in case someone else ran into this problem! Firmware 6.5.1 (Current stable release) Asterisk 1.2.13 Call Completion: Off Peer to Perr call completion: On (canreinvite=no is set in sip.conf for each friend) Call join on Xfer (2 calls): Off Those settings seem to do the trick, I tested on Snom 320s with no errors at all, Im going to test on the 360s later today,

Hi, I wish to connect several ATA186 Phones to each other, to iconnecthere and to the PSTN using asterisk. Please tell the appropriate settings for firewall (ports to open etc.) sip.conf and extensions.conf(part relevant to iconnect). Also I would be glad to get a working example of your ATA186 configuration. I tried searching the mailing lists and several sites but did not find an answer.

Hello all, I have a system running AsteriskNOW with asterisk asterisk-1.8.8.1-1_centos5 from AsteriskNOW repository. I just changed our Polycom 335 sip.conf so that blindpreferred=1 (all transfers default as blind transfers). If a customer calls in & we answer & transfer, everything works fine. But if we call out to a customer & then transfer to another internal extension, that

Hi, I'm still hassling with the consultative/attended transfer stuff. Someone please help me identify this A lot has already been said about the ATA186. Some report it works fine, others say it doesn't. Lets get clarity on this. My scenario is reasonably simple (I think) Phone A: SIP/video1 Phone B: SIP/werkkamer Phone C: IAX2/provider Phone A calls phone B, they chat: *CLI> show

I thought I'd post my experiences for the benefit of anyone else who may be at the point I was when I first started with asterisk. I have 2 incoming analog lines (north eastern U.S., Verizon) where one is set to ring if the first is busy. I bought a bare-bones system from abs-pc with the following components: POWER SUPPLY 450W ALLIED ATX450P4 R(41) MB NFORCE2 A7N8X DELUXE ASUS RTL(Standard)

I'm using FreePBX 2.5.2.2 with Asterisk 1.6.1.4. If I make a call and then decide to blind transfer them using ## my side of the call is not hung up. Instead it sends me to voicemail. If somebody calls me and then I blind transfer them with ## I am hung up on as expected. I called from 8678 to 28688. I then transferred the call to 8532. Asterisk acts like it wants to hang up, but then

I dont have a cisco acount yet can some bady hel me with the ata18x-v2-16-030401a-1.zip file. thanks in advance Rodney Acosta Coya. Dpto. Tecnologia de la Informacion. racosta@moanickel.com.cu Tel:(53)(24) 62 611 -----Mensaje original----- De: Paul Rodan [mailto:asterisk@glitch.cc] Enviado el: Martes, 23 de Noviembre de 2004 11:24 a.m. Para: 'Asterisk Users Mailing List - Non-Commercial

Upgraded from 16.2.14 to 1.6.2.15 on Fedora 13, with aastra 9133i and 57i. On 9133i and 57i: #<extension># works for a blind transfer. Xfer<extension>Xfer doesn't! All this worked on 1.6.2.14. Nothing useful on cli, verbose 3, DEBUG. Here extension 169 answers an outside call, and tries to transfer it to 145 using the Xfer button: -- SIP/169-0000009c answered

Hi, I am running a Asterisk 1.6 box in our Data Centre, and have a number of users connecting to that box, as their PBX. Calls in and out work fine, as does voicemail. The PBX at the Data Centre has an External IP, Nat?d to it by the firewall, and the relevant ports are open. The Office users have a dedicated internet connection for the phone lines, and calls are seen to traverse this

far as amount of data to transfer, number of files, or the size of any one file. However, in looking at the output of one particular job it looks like it?s just putting out directories when it gets to a new one, and not the filename of everything it?s transferring. And in some cases where I've tracked the files down by file size, it will skip the directory name when it moves on. For

Hi everyone, Sorry if I'm repeating the e-mail, but I'm having problems with the list. I'm currently trying to enable call transfer to different domains in asterisk box (Asterisk 1.2.13 running on Debian etch). I have a configuration that requires me to transfer call to separate domains like ext at 10.10.10.10:5050. My calls come from a R2 channels in a board installed in the machine.

Hello, I have a customer who said that their Snom 360 is joining calls by accident. The situation is that they had one call on the line and another call came in. She pressed the hold button on the phone and the two calls were joined together. I do have "Call join on Xfer" set to yes, but I thought that would only come into play when doing a transfer, not putting someone on hold. The

Hey all! I'm having problems trying to set up an ATA 186 with my Asterisk box. When I get the phone to place the call, I type the extension and I only get busy signal after 5 seconds. So I can't call my Asterisk box from my ATA and either call from my Asterisk to my ATA. Does anybody know what can be happing? Log is attached.. tks regards Oz -------------- next part -------------- >

Anyone using the UIP200 with *? I am having difficulty getting the phone to register and *stay* registered for more than 4 seconds. The * console shows the UIP200 registering and records the user agent. The UIP200 displays station name and time on its LCD, then 4 seconds pass and it shows #1 DISCONNECTED. The * console reports no problem and believes the device to still be registered. A call

Polycom Phones (updated for 3.2.X firmware with asterisk 1.6.1 Jan/2010) With SIP 3.2.X firmware (available on the Polycom download site) and Asterisk 1.6.1, Polycom phones now support a full featured BLF showing statuses of Ringing, Inuse and Online and one touch directed call pickup. On the asterisk side all that needs to be done is to add a hint to the extension and enable directed pickup.

Hi, all I'd like to configure Asterisk to receiving call from PSTN. After PSTN phone call in, Asterisk will prompt user to enter a number, then Asterisk will transfer the call to a SIP phone by this number. Please help me check the following extensions, is that OK? thanks! [from_pstn] exten => _.,1,Answer() exten => _.,2,GoTo(Xfer,s,1) [Xfer] exten =>

Hi All, Using Asterisk 1.6.0.28, having to register some Cisco 7940/60 with SIP firmware 7.4.0. Most functions work from the phone except blind transfer (attended transfer from phone works fine and # PBX transfer works). Blind transfer from the phone uses SIP Refer method. I've seen a bunch of posts about asterisk and SIP Refer, but I can't seem to find the version that this has been

Firstly can I ask when the documentation site will be online again? I'm struggling here without it. Further to my recent post I have tried to simplify things a little. I have used a VoiceXML app to simple call an asterisk extension. EG: <form id="transfer"> <block> <call name="xfer" dest="sip:101 at 10.0.4.147:5060"/>