similar to: Questions... connecting Asterisk to the World

Hi, I am looking to integrate Asterisk with a Siemens HiCom 150e via BRI and wondered if anyone is able to offer any advice. In simplistic terms, my goal is to pass calls from the HiCom to the Asterisk box. e.g: HiCom user dials access code and can call Asterisk extension or establish SIP call over Internet. Likewise, I'd like Asterisk to be able to present a call to the Hicom, either

I have a strange problem with overlap dialing. I installed an asterisk server between a Siemens HiCom PBX and our telephony provider. Everything is working fine except some strange problems with the dialing of the fax (connected to the HiCom PBX). It seems to me that if dialing takes too long Asterisk just hangs up the channel without recognizing that the fax machine is still dialing: (Fax gets

Hi, I have a server with 2 TE110P cards. 1 card is plugged to telco line, another card is plugged with a Hicom PBX. I want to send some call to VoIP phones and all other to my PBX. I don't known how to make my dialplan : ===========Extensions.conf========== [incoming_call] exten => 090200000,1,Goto(callcenter,100,1) exten => 022956353,1,Goto(callcenter,100,1) exten =>

Am 14.06.2020 um 17:05 schrieb Antony Stone: Hi Antony, > You mean that the Thomson phone is registering to Deutsche Telekom? > > I thought it was registering to your Asterisk server. Sorry, I didn't read correctly your test 2b... Normally my Thomson phone is registering to my Asterisk server. I tried to register the Thomson phone directly to Telekom's server, to check if the

Hi list! I already had the problem last year, then it would be solved (surely from some technician by Deutsche Telekom on their servers), and now I have the problem again (but I didn't changed my Asterisk configuration). The problem: after 15 minutes will the call dropped, but only if the call is to another nation! If I just call another phone in Germany, I can speak longer than 15

Hi list! I think there are many german users in this ML, that use Asterisk with the new line of Deutsche Telekom (Magenta Zuhause). My ISDN will be converted in Juli (Kaboom-day at Juli, the 3rd...) and right now I can just hope, that I configured my Asterisk well to work with Deutsche Telekom, but I cannot be sure, since I can't test it... So my question: can someone using Asterisk with

Am 13.06.2020 um 22:56 schrieb Antony Stone: Hi again, > 2b. Take your Thomson telephone to some other location with Internet access, > let it register to your home Asterisk server, and them make a call to the same > number yet again. I'm sure you can get the Thomson to connect to Asterisk via > some external network, since you say you can do this from your Android phone.

Hello Joshua, thank you very much for your extremely quick answer! I really appreciate your work and your friendly and your patient support! On 06/07/2017 at 10:33 PM, Joshua Colp wrote: > On Wed, Jun 7, 2017, at 05:28 PM, Michael Maier wrote: >> Hello! >> >> I've got a problem to select the correct trunk if there is one provider >> and different numbers with

Hi! My telco is Deutsche Telekom and they got about 30 SIP servers right now. Currently I've set up a template for incoming calls in sip.conf and added each SIP server by it's IP address like this: [DTAG-in-1](DTAG-in-template) host=217.0.16.103 ... [DTAG-in-30](DTAG-in-template) host=217.0.20.99 I've done that to improve security and to be able to assign all calls coming in

Hi list! Yesterday Deutsche Telekom had a really big problem and Asterisk couldn't connect to the remote Server (by Telekom) until today about 7:30. Well, it could happen... What I find really annoying was that I needed to restart Asterisk as I checked with sipsak that the Telekom-Server works... I think, this should not be normal... Can someone explain me why it happens and what I have to

Hello, we have a PRI (E1) to a carrier and a second one to a legacy PBX: DTAG ---pri---- * ------ Hicmo (PSTN) | | Sip and more Many normal inbound calls are direcly routed to the hicom. Outbound calls from the Hicom go through LCR and then to PSTN. Inbound faxes are working, but outbound faxes from hicom to pstn are

Am 11.06.2019 um 20:42 schrieb Antony Stone: Hi Antony, > I think the main question here is: how are you connecting Asterisk to the > telephone system? Via VoIP... > You mention that you're on DSL from Deutsche Telekom, but is the call going > over this DSL link to soem SIP provider, who then connects you to the PSTN, or > are you connecting Asterisk locally to the phone

Deutsche ?bersetzung folgt / German version following ===================================================== Hello, i have Asterisk running with 2 ISDN-Cards. One AVM Fritz for connection to german ISDN and one HFC-compatible-Card (NT mode) for connection to ISDN-Phone (later: ISDN-PBX). Here is my actual installation: ISDN -> Fritz - ASTERISK ? HFC-NT <- ISDN-Telephone If i pick up my

Hello, I have an installation in Austria; ISDN service provided by Austria Telekom. The main number of the service is 6 digits. Incoming calls may contain 2 additional digits, which I then use to route the call to the correct extension. Telekom sends me all the digits. My problem is that when someone tries to dial an 8 digit number to an extension from an outside analog phone, AT sends the call

Hi * :-) I found in the online WiKi docs some information on how to integrate Asterisk with "old PBX"... http://www.voip-info.org/wiki-Asterisk+legacy+integration ...but I couldn't find anything on integration with a Siemens HiCom 150E. Later on we'll migrate to a HiPath 3750 so information covering this model would be nice too... Do you know if any of the PBX listed

On Monday 15 June 2020 at 18:55:23, Luca Bertoncello wrote: > Absolutly *no changes* on the behaviour compared with my Thomsons... Okay, I'm glad we can rule out the specific make / model of phone - that would have been bizarre. > I try to summarize: > > 1) Phones are not the problem, since 3 phones of 2 different > companies/model have the same issue. Good (if you see

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Guenther Boelter <gboelter at gmail.com> schrieb: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > On 05/31/2015 02:31 PM, Luca Bertoncello wrote: > > Hi list! > > > > Now all works as expected, at least in the simulation I did with > > AsteriskNOW. Hopefully it will work later, when Deutsche Telekom

Hi list! So, now I have a business contract and a technician was here to check the DSL... Nothing found, except that for 50Mbps I need now vectoring. Really nice... A couple of years ago I could get 50Mbps without vectoring. Of course, Deutsche Telekom said nothing about this change... Well, I got it working, and now I have 48Mbps down and 10Mbps up. I _REALLY CAN'T_ believe, that this is

Hi list! I use Asterisk 13.14.1 from Debian repository on a DSL from Deutsche Telekom. Asterisk works well, but I have really often an high delay (I understand it since the other party speak some seconds before he hears my question and answer) and sometimes I hear an echo. I really don't know what can I check and what can be the problem. The problem exists since a very long time, but in the

Hi list! I'm using Asterisk 13.14.1 from Debian 9 repositories. The provider is Deutsche Telekom und Messagenet (just for receive). I can call and receive calls, but I have a little problem: there is a "delay" of about 1-1,5 seconds between the time the voice is sent and the time when the voice is received, so that it happens very often that the peer does not get my voice and try