similar to: netvision-mib driver

Hello, we have two UPSes - one Galaxy and one from Socomec, both monitored by the NUT server. The NUT server runs the version 2.7.2. We have roughly 3500 clients running upsmon, reading the status of both UPSes. They run mainly the version 2.6.4 and some 2.7.2. We observed the following on both client versions, regardless whether we run upsmon in the daemon or debug mode: Running upsc socomec

Hello We have an Socomec Sicon Netys PR3000 UPS equipped with NetVision Web/SNMP adaptor. I try to monitor the ups using snmp-ups driver and netvision mibs set. The snmp-ups driver starts correctly and connects to the UPS, upsd confirms it, but upsmon constantly shows "No communication" error I think the cause is the SNMP adapter reports the UPS status as "ECO mode"

On Oct 2, 2014, at 1:53 AM, Tarvo Tiits <Tarvo.Tiits at automaatika.ee> wrote: > On 02.10.2014 03:42, Charles Lepple wrote: >> On Oct 1, 2014, at 5:07 AM, Tarvo.Tiits at automaatika.ee wrote: >> >>> Why is ups.status empty? >> If I understand the commit log for SVN r3590, then that revision was supposed to set the status to OL if the numeric state was 9 for

On 02.10.2014 03:42, Charles Lepple wrote: > On Oct 1, 2014, at 5:07 AM, Tarvo.Tiits at automaatika.ee wrote: > >> Why is ups.status empty? > If I understand the commit log for SVN r3590, then that revision was supposed to set the status to OL if the numeric state was 9 for ECO mode. It does not appear to do that: > >

2014-02-12 10:13 GMT+01:00 <hamid.nabil at coop.no>: > Arnaud, > > > > I see your name all over when I look for Netvision MIB. Thought maybe you > can help me. I want the MIB for our UPS (SOCOMEC) with NetVision 6.0 > > > > I appreciate your help in advanceJ > > Regards > > Hamid Nabil > > > Hello Hamid, the procedure describing how to do

Hi, I have UPS Socomec ITYS 3000 with Netvision card. OS is Centos 6.5 64-bit. NUT installed with yum,. nut-2.6.5-2.el6.x86_64 nut-client-2.6.5-2.el6.x86_64 Why is ups.status empty? Here is upsc output: upsc myups at localhost battery.charge: 97.00 battery.runtime: -60.00 battery.voltage: -0.10 device.mfr: Net Vision v6.01 (SN 0101414290) device.model: ITYS 3 kVA device.serial: 3I14450043

On Oct 1, 2014, at 5:07 AM, Tarvo.Tiits at automaatika.ee wrote: > Why is ups.status empty? If I understand the commit log for SVN r3590, then that revision was supposed to set the status to OL if the numeric state was 9 for ECO mode. It does not appear to do that: https://github.com/networkupstools/nut/commit/9cb2de3d9568aa382cc118b4385d97d5664c457b Is your UPS set to ECO mode? Can you do

Hi, This appears to be related to a thread from January 2010: http://lists.alioth.debian.org/pipermail/nut-upsdev/2010-January/004470.html NB: This is on an HP-UX 11.31 box, using a self compiled and packaged version of NUT 2.6.3, and net-snmp v5.7.1. Therefore some of the search paths and things like that may well be wrong because I've done something dumb. I'm also only just getting

On 06/24/2017 04:52 AM, Charles Lepple wrote: > On Jun 23, 2017, at 5:50 PM, Ambrogio Coletti <ambrojohn at gmail.com> wrote: >> "This TrippLite device (09ae:1330) is not (or perhaps not yet) supported by usbhid-ups. [...]" >> but my device (SU2200RTXLCD2U) is supported, as clearly state here. > No, the HCL also mentions "protocol 4001". For Tripp-Lite,

Hi all, I am trying to install a version of Libvirt that will be compatible with qemu-kvm-1.1 but I cannot seem to get Libvirt to compile. During the make portion of the install I get the following error: ... make[4]: Entering directory `/home/shawn/libvirt-0.10.0/docs' Generating 404.html.tmp /bin/bash: line 5: 59204 Segmentation fault /usr/bin/xsltproc --stringparam pagename $name

This mib used to work, so is there a way to go back to the version prior to this one without downgrading the whole package? * Starting UPS drivers... Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Generic SNMP UPS driver 0.44 (2.4.1) Detected GXT2-2000RT120 on host upswallleft (mib: ietf 1.3) [upswallleft] nut_snmp_get: 1.3.6.1.2.1.33.1.4.4.1.4.0: Error in

Hello, I have tried to use the blazer_ser driver to interface with my UPS. nut is not able to detect the UPS. I have not been able to find much info regarding Socomec UPS support in nut. Socomec does publish a description of the serial protocol for these UPS's, which can be found here: http://www.socomec.com/download-jbus-modbus.html(select UPS OTHER for device model, 1-5KVA for device power

Hi, I am considering purchasing a UPS and want one that I can query from bash scripts. I would assume nut to be the best tool to allow this. I have been directed to a Socomec RT 3000VA UPS. I have previously had MGE Pulsars and interfaced to them with nut's mge-utalk and mge-shut drivers with reasonable success, apart from the odd data stale error. These Socomec units have RS-232

Hi guys, I try to compile the libvirt-php but no luck, below are the output i got.. webserver:~/libvirt-php-0.4.3 # ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by

Just thought I'd share my success with chan_h323 and our Symbol NetVision phone (4046-100-US). Voice quality is excellent, and setup was trivial. The new NetVision firmware (4.21) is much better than the 3.x stuff. It gives the phone a whole new look and feel. The hardest (and longest) part was getting OpenH323 compiled. After that, H.323 ran out of the box. I simply uncommented

hi all I'm trying to get this Symbol NetVision H.323/802.11b phone (http://www.symbol.com/products/wireless/netvisionphone.html) connected to asterisk, but it doesn't look an easy task - at least without this serial cable.. Anyone who've succeded this? roy -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356 Computers are like air

Hi List ! I received an unit of the Symbol NetVision Phone and i will test it with asterisk using H.323 or Skinny , somebody tested this phone with asterisk and can share experience? Miklos -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040113/2ea43296/attachment.htm

I was looking at these SYMBOL NETVISION II NP-3010 VoIP TCP/IP WIRELESS PHONES - I know they have been discontinued. Am I asking for trouble to buy some of these for use on Asterisk? TIA Bart

Hi! I would like to ask about current state of Windows port. Is it frozen? It will be cool to know the plans :) Where are a lot of Windows-branches at GitHub. What is the most actual one? The Windows builder looks like turned off, am I right that it is not available currently and where were no builds after version 2.6.5-6? I couldn't find any info about proper environment to build Windows

Hello, Here is a summary of discussions around NUT builds on Mac OS X 10.10. Starting from https://github.com/networkupstools/nut-website/issues/7 <https://github.com/networkupstools/nut-website/issues/7> @JeanPerriault I've found msort on macports (https://trac.macports.org/browser/trunk/dports/textproc/msort/Portfile, http://billposer.org/Software/Downloads/ msort.pdf), but I'm