similar to: 06da:0002 Phoenixtec Power Co., Ltd UPS

Hi Charles. I have got this output with driver usbhid-ups ups.conf [Phoenixtec] driver = usbhid-ups vendorid = 06da productid = 0002 port = auto #~ langid_fix=0x0409 desc = "CENER ONLINE 1000VA" # export USB_DEBUG=5 # ./usbhid-ups -a Phoenixtec Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '3' 0.000557

On Dec 3, 2014, at 2:02 PM, janc at telefonica.net wrote: > USB error: error sending control message: Invalid or incomplete > multibyte or wide character This is a wild guess, but what about using the option "langid_fix=0x0409"? -- Charles Lepple clepple at gmail

On Dec 1, 2014, at 3:00 AM, janc at telefonica.net wrote: > I have a very nice working ups from: > CENER ref: "Active 1000VA 230V 12 CENER" and front logo "LA 900" Do you know what software was originally recommended for the UPS? Unfortunately, Phoenixtec seems to have made a lot of different USB-to-serial adapters. The most likely driver is blazer_usb (or nutdrv_qx,

Hi! Charles. This is the output with 'explore' # ./usbhid-ups -DDDD -u root -x explore -x vendorid=06da -a CENER_LA900_usb Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '4' 0.000676 upsdrv_initups... 0.288980 Checking device (06DA/0002) (008/004) 0.316956 - VendorID: 06da 0.317057 - ProductID: 0002

On Dec 4, 2014, at 7:01 AM, janc at telefonica.net wrote: > I have got this output with driver usbhid-ups > > ups.conf > > [Phoenixtec] > driver = usbhid-ups > vendorid = 06da > productid = 0002 > port = auto > #~ langid_fix=0x0409 Oh, sorry - I meant for you to try that with blazer_usb. -- Charles Lepple clepple at gmail

This is the output with line power turned off. # ./usbhid-ups -DDDD -u root -x explore -x vendorid=06da -a CENER_LA900_usb Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '4' 0.000563 upsdrv_initups... 0.299203 Checking device (06DA/0002) (008/003) 0.327122 - VendorID: 06da 0.327217 - ProductID: 0002 0.327261 -

On Dec 4, 2014, at 7:01 AM, janc at telefonica.net wrote: > 0.339848 Report[get]: (2 bytes) => 01 00 > 0.339928 Path: 008c0001.008c0003, Type: Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 0 > 0.343852 Report[get]: (2 bytes) => 02 00 > 0.343931 Path: 008c0001.008c0002, Type: Input, ReportID: 0x02, Offset: 0, Size: 1, Value: 0 > 0.343975 Report[buf]: (2 bytes) => 02

Hi Arnaud, Any luck with the latest subversion trunk? From: Greg Sent: Wednesday, May 13, 2009 10:34 PM To: Greg ; Arnaud Quette Cc: Kjell Claesson ; nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Nut and PowerWare 5115 Hi Arnaud, Some more testing on Ubuntu 9.04. Here is the output of bcmxcp_usb and lsusb ============================================ root at

On Dec 11, 2014, at 5:43 AM, janc at telefonica.net wrote: > 0.339329 Entering libusb_get_report > 0.342986 Report[get]: (2 bytes) => 01 00 > 0.343085 Path: 008c0001.008c0003, Type: Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 0 > 0.343120 Entering libusb_get_report > 0.346953 Report[get]: (2 bytes) => 02 00 > 0.346993 Path: 008c0001.008c0002,

Hello, ppl! I try configure NUT for communicate with my Powerware 5115 UPS. As root I run '/lib/nut/bcmxcp_usb -DDDD -u root -a ups', but driver can't connect to my UPS. Some output: Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) debug level is '4' usb_set_debug: Setting debugging level to 3 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001

Hi, I'm trying to get a Powerware 5115 to communicate with the NUT via USB under Debian Linux and need help. Here is the output that I see. co-nh5:/tmp/mnt/projects/pwusb/nut-2.4.1# /usr/local/ups/bin/upsdrvctl -u root start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 Communications with UPS lost:

Hi Please could someone assist me? I?e got a 3g usb dongle - Huawei E1552. [root@]# lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 03f0:8407 Hewlett-Packard Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus

Hello, I 'm trying to set up an Eaton PW5110 using nut-2.4.1 in OpenBSD, my ups.conf follows : [myups] driver = bcmxcp_usb port = auto desc = "Eaton PW 5110 (1500VA)" My first attempt to run upsdrvctl ended up complaining about unimplemented usb_clear_halt() in libusb. I patched libusb-0.1.12 with the following patch :

Roman, I don't think I already asked, but could you post the output of lsusb -v -d 06da:0003 Just to be sure that we're not exceeding some buffer limitations of the device. Best regards, Arjen -- Please keep list traffic on the list

Hi I try since a week to run my MGE Protection Center under Suse Linux 9.3. At the MGE site i found an HowTo. I have installed NUT an create the=20 configs but at boot the newhidups driver say=B4s "no USB/HID UPS found".=20= Anyone an Idea? Johannes Schatz=

Hello. I've been experimenting with the USB connection of an Ippon BackComfoPro 800. This is the device "06da:0003 Phoenixtec Power Co., Ltd". The current SVN version of NUT does not work with this device. The megatec_usb driver can't get a proper reply to a Q1 request, failing with an error message about "short read (14 bytes)" instead. I have found the reason for

# export USB_DEBUG=5 # /usr/local/ups/bin/usbhid-ups -a CP550SLG -DDDDD Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 0.000000 debug level is '5' 0.000426 upsdrv_initups... usb_set_debug: Setting debugging level to 5 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001 usb_os_find_busses: Found 002

Citeren "Daniel O'Connor" <doconnor at gsoft.com.au>: > usb_control_msg: 161 1 769 0 0x813310c 2 4000 > USB error: error sending control message: Input/output error > Can't retrieve Report 1: Input/output error > upsdrv_updateinfo... > Got to reconnect! > > usb_set_debug: Setting debugging level to 3 (on) > usb_os_find_busses: Found /dev/usb0 >

2015-06-08 13:09 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > On Mon, 2015-06-08 at 10:13 +0200, Arnaud Quette wrote: > > -ATTRS{idVendor}=="06da", ENV{UPOWER_VENDOR}="Liebert" > > > > +ATTRS{idVendor}=="06da", ENV{UPOWER_VENDOR}="Phoenixtec Power Co., Ltd" > > I'm guessing this would require changes in NUT, so I

Howdy, I had this working with lots of help for a developer before (Charles Lepple), but after upgrading to a somewhat more current version of FreeBSD the patched-up version stopped working. Seeing as this was more than a few years ago, I thought I'd give a new libusb and NUT a try to see if it might work out of the box. So far, no luck. Some info: FreeBSD 6.3 libusb 0.1.12 NUT 2.4.1