similar to: usbhid-ups must use '-u root'

Hi, Self-reply ftw, is it something to do with the permissions of the device that is created when the UPS is plugged in? I remember that Debian does have a pretty strict permissions structure, so do I have to fiddle the permissions of something in /dev? I'll try updating nut-server to version 2.6.4-2.3+deb7u1 in wheezy backports and report back - initial attempt to install from wheezy

I went to the link to test the power off if the battery gets to low. Here is what I got on the command line. root at odroid-u2:/etc/nut# /usr/local/ups/bin/upsdrvctl -t shutdown -bash: /usr/local/ups/bin/upsdrvctl: No such file or directory root at odroid-u2:/etc/nut# find / -name upsdrvctl /sbin/upsdrvctl ^C root at odroid-u2:/etc/nut# /sbin/upsdrvctl -t shutdown Network UPS Tools - UPS driver

Hi all, I've finally gotten around to setting up the netbook that controls my UPS and I would like to make sure that I've got the metacode correct before configuring nut :) Here's what I've got: Belkin UPS F6C120auUNV * Batteries recently replaced * On battery: 24 port switch, PoE AP, antenna power booster, ADSL modem, MythTV server, 19" monitor * On surge

Hi Arjen My apologies fro drifting off topic in the other mailing list...:-) On the bottom of the Belkin UPS unit - is the model number: F6C120auUNV The "au" is for Australia I think. "man belkinunv" states that F6C120-UNV is supported - and I assumed that the "au" would not prevent this. I plugged in the USB to gather the information you requested. My intention

Hello, I have trouble connecting to an Eaton 5PX UPS via the usbhid-ups driver. It is supposed to be fully working according to the compatibility list (support level 5). OS: A fresh Debian stable install. Then changed the apt source to unstable and did "aptitute update" and "aptitude install nut". Nothing else. I did that, because the "unstable" package is a more

Good morning all. I am on a different system with a different UPS, and I am fighting a similar problem to the one I posted about yesterday, and again making little headway. This system is running Debian Wheezy and connected to an APC BackUPS ES550. Starting things manually seems to go well, but my startup script fails, and nothing is logged anywhere. This may not be a NUT question per se, but I

Hi. I have this this on a Odroid-u2 backing it up. Have the USB from the CyberPower SX650G plug in the Odroid-u2 and when I do a lsusb it looks like this: Bus 001 Device 008: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS The User's Manual list SE450G and SX650G. So I guess they would take the same driver. CyberPower web page has a driver but it's for i386 not ARM like

Hi, I'm trying to get a sweex ups working with nut on debian sarge. This one: http://www.sweex.com/producten.php?lang=1&%20sectie=&item=59&artikel=95 It's shipped with UPSmart and according to the compatibility list it should work with the genericups upstype=7 driver. But it doesn't. I get: mybox:/etc/nut# /etc/init.d/nut start Starting Network UPS Tools: (upsdrvctl

Hi all, i've a problem with only a command in all suite: upsrw. root at ProLiant:/etc/nut# upsrw -u monmaster -p p455w0rd -s ups.delay.shutdown=180 ups Unexpected response from upsd: ERR ACCESS-DENIED root at ProLiant:/etc/nut# upsc and upsmon work greatly. This is in my /etc/host.allow: upsd : localhost, LOCAL, 127.0.0.1, [::1] : ALLOW What miss ? Thank you!

Hi, When I start upsd under normal conditions, I get this: -------------------------------------------------------------------------------- Network UPS Tools upsd 2.0.4 /etc/nut/upsd.conf is world readable Can't connect to UPS [tripplite] (tripplite_usb-auto): No such file or directory /etc/nut/upsd.users is world readable Synchronizing........ giving up

Hi, we do have APC Smart-UPS each with AP9617 and latest FW. As we found out we are not able to shutdown the UPS via SNMP - neither immediately nor delayed. And we cannot set values, but we can read them correctly. So it seems as we are not able to write to the UPS and get back strange errors. root at abex:/etc/nut# upsdrvctl -DDDD shutdown apc10001 Network UPS Tools - UPS driver controller

Hello, I try to install my APC Back-UPS RS 800 on my debian system (Etch): Linux aigner 2.6.18-3-686 #1 SMP Mon Dec 4 16:41:14 UTC 2006 i686 GNU/Linux When i try to start the driver an i use hidups i get this failure massage: aigner:/lib/nut# upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: HID UPS driver 0.13 (2.0.4) Warning: This is an experimental driver.

I got a bunch of configfiles that look like this: mgmt-dev:/etc/nut# grep -v 'niets' * ups.conf:[ups] ups.conf:driver=newhidups ups.conf:port=auto upsd.conf:ACL all 0.0.0.0/0 upsd.conf:ACL localhost 127.0.0.1/32 upsd.conf:ACL remote 192.168.110.0/24 upsd.conf:ACCEPT remote upsd.conf:ACCEPT localhost upsd.conf:REJECT all upsd.users:[monuser] upsd.users:password = mypass upsd.users:allowfrom

Got the: git clone git://github.com/networkupstools/nut.git To work. Had to all so do this: apt-get install autoconf apt-get install libtool Did put driver = usbhid-ups in the /etc/nut/ups.conf file like you said. Here is what I got for it all: root at odroid-u2:~/nut# ./autogen.sh Calling autoreconf... libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. libtoolize: copying

28 ??????? 2016??. 4:18:06 CEST, Raymond Day <raymondday at hotmail.com> ?????: >I forgot how I ask this. But I just found out. It's a list here: > >http://lists.alioth.debian.org/pipermail/nut-upsdev/2016-October/007229.html > >Thanks again. Seems like it's working real good. > >Is there a way to test if it will turn off my server when the battery >power

Hello, I am having trouble getting upsd to start. I am using the Debian NUT packages version 2.0.3 (current in Debian/sid). I am using the newhidups driver with an APC Back-UPS BR 800. The init.d script wasn't functioning, so I backtracked to running upsd manually and I get: foxstar:/etc/nut# upsd -u root Network UPS Tools upsd 2.0.3 Can't connect to UPS [foxstarups] (newhidups-auto):

Hi all, I've got nut going with a Belkin F6C120auUNV. I'm able to communicate with the UPS, upsc gives data: $ sudo upsc BelkinUPS battery.charge: 37 battery.charge.low: 30 battery.charge.warning: 30 battery.runtime: 120 battery.type: PbAc battery.voltage: 23.7 ... I've enabled the CGI, and when I go to upsstats.cgi, I see a line entry like this: System: BelkinUPS Model: [error:

Here are my permissions and user info. Let me know if there is anything else I should check pi at nutpi:~ $ ls -alt /etc/nut total 56 drwxr-xr-x 87 root root 4096 Jan 26 15:22 .. drwxr-xr-x 2 root nut 4096 Jan 26 13:53 . -rw-r----- 1 root nut 4719 Jan 26 13:15 upssched.conf -rw-r----- 1 root nut 15347 Jan 26 11:25 upsmon.conf -rw-r----- 1 root nut 1543 Jan 26 10:02 nut.conf -rw-r-----

I did just copy and paste on the command line like this: root at odroid-u2:/etc/nut# Shutdown UPS: serverups -bash: Shutdown: command not found root at odroid-u2:/etc/nut# /lib/nut/usbhid-ups -a serverups -k Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.31 Using subdriver: CyberPower HID 0.3 Initiating UPS shutdown root at odroid-u2:/etc/nut# Don't know why

hello everyone, I've been testing the NUT solution as opposed to the undocumented LanSafe application to control my Eaton UPS. I am on a Slackware 13.37 system with a 2.6.37.6 kernel. NUT version is 2.4.3 . I installed the tarball by compiling it directly on my system (as a slackbuild package). The UPS is an Eaton Powerware 9155, but I don't know how to obtain the manufacturing date. The