similar to: microdowell

Hello, i just want to know, when will be Microdowell B BOX N30 ups support? If it planned? Or is any way to get work nut with this device? I am using nut latest stable version. Thank you in your advice! -- Best Regards, Viktorija

Hello, is it to possible to monitor Microdowell B-Box N30 with latest nut? I have tried but wihout any success. Others ups works fine with nut. What about driver to this ups model? Best Regards, Viktorija

Hello All I have a MicroDowell ups (BBox BP 1000) connected to a Gentoo box by serial cable. If I try to start the driver , I see the following : Network UPS Tools - CyberPower text protocol UPS driver .05 (2.0.5) Warning: This is an experimental driver. Some features may not function correctly. debug level is '13' ups_sync: send [\rP4\r] ups_sync: got ret 46 [#1000VA

Hi I got an offer for some microdowell enterprise N- series UPS'ses. The NUT homepage only lists the B.Box BP series. Does anyone know if the Enterprise N- series works with NUT? JonB

Hi all, first message to the list. :-) I've got an iBox made by iDowell: http://store.apple.com/uk/product/TR423ZM/A This seems to be similar to the smaller Microdowell UPS: http://idowell.eu/ I cannot get it recognised by the drivers. This is what I get when I plug in the USB connector: Jan 3 19:27:26 compaq kernel: usb 3-2: new low speed USB device using uhci_hcd and address 47

Hi Recently i bought a MicroDoWell BP50, and with it followed a USB 2 serial converter. When i plug it into my 2.6.19 kernel, dmesg shows hiddev96: USB HID v1.10 Device [Cyber Power System CPS RS232 USB BRIDGE for UPS] on usb-0000:00:04.2-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver So, i figured i should use usbhid-ups,

Hi, I'm running a Debian server (amd64) with the latest nut package (2.0.3-4). The server is connected to a Cyberpower OP750E ups. This seems to be connectable using nut with the cpsups driver. I've configured /etc/nut/ups/conf with the correct information. Here is what i get when trying to load the driver : serveurmeteo:/home/did# /sbin/upsdrvctl -v start myups Network UPS Tools -

- UPS MGE Premium Ellipse Premium 1200 - SuSE Linux 10.0 OSS, kernel 2.6.13 smp - gcc version 4.0.2 20050901 (prerelease), glibc-2.3.5-40 - mgeups-psp-3.0.0-3, nut-2.0.2-4 - Dell Dimension 8400 with dual core Intel Xeon. 3.0GHz. lsusb shows: Bus 002 Device 003: ID 0463:ffff MGE UPS Systems UPS less /proc/bus/usb/devices shows for bus 2 device 3: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=

I'd like to share some of my experience with this UPS. I've compiled nut from the Debian sid sources. Version is 2.2.1. I'm using the powerpanel driver. It seems shutdown.return does in fact what shutdown.return should do. I'll just copy&paste some of my notes made yesterday: Commands were issued as follows: "upscmd -u admin -p admin bbox at localhost

Hi Drew, I no longer work on NUT, but the folks at the nut-upsuser mailing list are extremely helpful. See http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser The 2.0.3 release is *way* out of date; the current stable NUT release is 2.2.0. It contains many improvements, particularly to the newhidups driver (which is now called usbhid-ups). If your distribution does not package a current

Hi there First a big thank you to all nut developers. I tried the 2.0.4 as well as the 2.0.5-pre1 versions with my CyberPower OP1000E connected to a serial to USB converter. All I got was the following: # /usr/local/ups/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.5-pre1 Network UPS Tools - CyberPower text protocol UPS driver .05 (2.0.5-pre1) Warning: This is an

Roger, Well, I tried the same script method with openSUSE 13.2, and it still did not execute. So I tried the system method, and it worked 1 time out of 3 attempts. I captured the last failure: 2015-09-04T11:43:38.825317-04:00 linux-5048 upsdrvctl[1887]: Can't claim USB device [2a37:5110]: No such file or directory 2015-09-04T11:43:38.825970-04:00 linux-5048 upsdrvctl[1887]: Network UPS

I am having some problems getting NUT to run with my cyberpower avr1200 (brandnew). I have a straight through serial cable, and I am getting this: /usr/local/etc/rc.d/nut.sh start Starting nut. Network UPS Tools - UPS driver controller 2.0.2 Network UPS Tools - CyberPower driver 1.00 (2.0.2) Giving up on hardware detection after 3 tries Unable to get initial hardware info string Driver failed

Hi Arnaud, I received several replies from technical support. It turned out that according to the UPS serial number it had been manufactured in 2012. So, the device should support the ability to disable the beeper. But still I can not disable the beeper using the latest version of UPSMON Plus in Windows: http://www.pcm.ru/data/download/public/soft/setup_upsmon_v2.9.rar (don't know why; the

Hello all, Rebooted my server by mistake (don't ask...) - everything was working OK before the reboot, but after the reboot, NUT stopped working - so had a look and I found I couldn't track the exact problem - I'm quite stumped as there's nothing indicating that there's a problem, but it just doesn't work... In a nutshell.... destiny:/usr/local/ups/bin# ./upsdrvctl

Hello, I'll be back with my MGE Evolution 2200 connected with RS232 I upgrade nut 2.0.1 in nut 2.2 + psp as you ask me PSP autodetect my UPS and autoconfigure NUT. not really diffcult ! So I didn't change anything but I always have in my syslog these event Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale Nov 13 11:09:27 mezenc upsmon[3865]: Poll

Hi Klaus, Thanks for your much appreciated feedback. Klaus Holler wrote: > Hello, > >I just wanted to report that the Back-UPS RS 800 works with the >Network UPS Tools. Currently I use the following (Ubuntu breezy) >debian packages on kernel 2.4.31: >ii nut 2.0.2-1build1 >ii nut-usb 2.0.2-1build1 > >lsusb reports: >ID 051d:0002 American Power Conversion Back-UPS Pro

Hi all, I would like to check two UPS in two different buildings with an ubuntu server. I use SNMP on both UPS. The cgi-page displayed all information as expected, but if I pull the fuse for one UPS in building A, none action occur. I expected that I get a mail "UPS A on Batt" and that after 5 minutes the shotdownscript starts. But no action. I saw that there is no upsmon process

Hi, I recently bought a MGE protection center 500. I am running a gentoo, and I am currently trying to enable the ups handling by the os, with no success. First, I compiled and installe nut 2.0.2 (with usb support) and psp 3.0. I made ebuild for them that I will submit soon to bugs.gentoo.org. The ups is connected via usb, and lsusb confirms that the device is detected (cf end of the mail for

i just purchased a tripp lite OMNIVS1500XL and have been attempting to get it working with the usb drivers since it doesn't have a serial port. it hasn't been anywhere near successful and i was hoping someone might be able to point me in the right direction. i run gentoo and this is what i currenlty have installed: nut 2.0.2 libusb 0.1.10a (gentoo modified) usbutils 0.11-r5