similar to: (no subject)

On Mar 13, 2015, at 6:30 PM, cinowell <cinowell at gmail.com> wrote: > Hello, > > I had running OpenMediaVault server with NUT 2.4.3 megatec_usb driver. After the OMV upgrade, NUT also upgraded to 2.6.4. I realised that megatec_usb removed in this version. So I have configured to use blazer_usb driver. However NUT behaves incorrectly after switching blazer_usb. System is being

Hi, I would like to report that Tuncmatik Newtech Pro 1 KVA (http://www.tuncmatik.com/en-US/productDetail.asp?RecID=290) works with nut(2.4.1) blazer_usb, blazer_ser and megatec drivers. The UPS came with an usb cable and a java based software for both linux and windows, named ViewPower (http://www-power-software-download.com). This UPS has double interface a USB interface and a serial

On Mar 16, 2015, at 12:26 PM, cinowell <cinowell at gmail.com> wrote: > I've done all the steps. However FSD indication did NOT disappear. So it seems UPS always send the FSD flag. I know this sounds kind of ridiculous, but you could use a hex editor to change 'FSD' to 'OFF' in blazer_usb (it only seems to occur once), which would restore the behavior of

2015-03-17 0:24 GMT+01:00 Charles Lepple <clepple at gmail.com>: > On Mar 16, 2015, at 12:26 PM, cinowell <cinowell at gmail.com> wrote: > >> I've done all the steps. However FSD indication did NOT disappear. So it seems UPS always send the FSD flag. One thing more. Can you launch the driver with a debug level of 3 and then report back the log (gzipped) of the same

I've done all the steps. However FSD indication did NOT disappear. So it seems UPS always send the FSD flag. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20150316/fd7ccc7a/attachment.html>

Hello, I am attaching debug logs. Hopefully it helps to fix this issue. Thank you. 2015-03-17 22:43 GMT+00:00 hyouko at gmail.com <hyouko at gmail.com>: > 2015-03-17 0:24 GMT+01:00 Charles Lepple <clepple at gmail.com>: > > On Mar 16, 2015, at 12:26 PM, cinowell <cinowell at gmail.com> wrote: > > > >> I've done all the steps. However FSD indication

Hi Alexey, Please post the output of 'lsusb' and 'megatec_usb -a sven_625 -u nut -DDDDD'. On Monday 15 June 2009 14:32:16 you wrote: > Package: nut > Version: 2.4.1-3 > Severity: normal > > I have a SVEN Pro+ 625 ups that uses megatec_usb driver. > In ups.conf I describe it like: > [sven_625] > driver = megatec_usb > port = auto > desc =

Hi Volker Kuhlmann and Richard Nelson, As both of you are interested in where I got up to with getting my Dynamix 1000 VA UPS working with Linux, here is the details. It works.. But not too well, as the driver still seems to need some work, and is not in the main nut source as far as I know. It also seems to sometimes not respond when it should. The manufacture has uses the same format as

Hi! I am trying to get an Atlantis-Land 1501 UPS to work under OpenBSD. The UPS works OK under Linux + megatec_usb driver+nut_2.2.2. What I get under OpenBSD is: root at puffwall:~ # dmesg OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2

Hi! I am trying to get an Atlantis-Land 1501 UPS to work under OpenBSD. The UPS works OK under Linux + megatec_usb driver+nut_2.2.2. What I get under OpenBSD is: root at puffwall:~ # dmesg OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2

Dears, I finally resolve my problem, I just make symbolic link: [test at box var/run/]# ln -s -T /var/state/ups/ nut Now I finally got services online: # /sbin/service ups start Starting UPS driver controller: [ OK ] Starting upsd: [ OK ] Starting UPS monitor (master): [ OK ] BUT, on upsc I

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good day to all. In one of the offices I'm administering there are about 15 UPS marked with the brand "Ippon BackPro". This brand is widely popular in Russian Federation, while by itself is a 'Made in PRC' megatec clone. Depending on the model this UPSes have got either one standard serial RS-232C interface (cheaper models like

2010/3/14 IT Department ULQS <it at quality.ua>: > > I try send this email to 'carlos.efr at mail.telepac.pt' but: > Fri 2010-03-12 19:26:13: <-- 550-The account has been suspended > Fri 2010-03-12 19:26:13: <-- 550 A conta do destinatario encontra-se > suspensa (#5.1.1) right, Carlos is retired from the NUT team. moreover the megatec and megatec_usb driver are

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

2010/10/18 Michael Eitelwein > Hi Arnaud > Hi Michael, > Yes, did test it without success. > can you please post the first 20 seconds running blazer_usb in debug mode, ie: $ sudo /lib/nut/blazer_usb -DDD -a cyberpower aside from fixing the megatec situation, ensuring that you'll be able to run the replacement is also to be considered ;-) now, for the megatec issue, we need

Hi Bj?rn, 2009/10/9 Bj?rn Torkelsson > Public bug reported: > > Binary package hint: nut > > I have recently upgraded from hardy to intrepid to jaunty. After > upgrading to Intrepid the megatec_usb stopped recognizing my Trust PW- > 4130M ups, it still does not work on Jaunty. It worked without any > problems in hardy. > > I tried the megatec_usb driver from hardy

An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20080701/3140c7d2/attachment.htm

Hi Heinz, 2010/5/30 heinz > Thank you for your nut-2.4.3 system. I had big troubles getting it to work > with the UPSONIC PROFFICE 650 UPS in USB mode. > > I had to rewrite the get_data_phoenix() function in drivers/megatec_usb.c > file. > It now appears to be working correctly. I have attached the source of the > modified function in case you might want to add it to a

Hey all, thanks for your work on nut. I recently got myself a new cheap UPS, and have thus far determined very little about it. I can run whatever you like to help identify and work with it. So far I've played around with various settings and have had some limited success with the megatec_usb driver (Debian testing version): ----ups.conf---- [plexus] driver=megatec_usb model=500VA mfr=Plexus