similar to: Nut-upsdev Digest, Vol 114, Issue 12

I was unable to setup |nut| on a server for the UPS Eaton 5E with USB connection. All results what did I get was that driver is not running and UPS is not recognized. What kind of driver is suitable for me and what kind of settings? Unit is Eaton 5E. result of |$ lsusb -v| |Bus 004 Device 007: ID 0463:ffff MGE UPS Systems UPS Device Descriptor: bLength 18 bDescriptorType

On Fri, Jun 29, 2018 at 3:40 AM Thiago Oliveira <cpv.thiago@gmail.com> wrote: > Hi Ales, > > I would like to prevent the guests from different subnets start a > communication. In other words I have the subnet 192.168.1.0/24 and > 192.168.2.0/24 and the guests from 192.168.1.0/24 cannot reach/talk with > guests on 192.168.2.0/24 at the same host. Is this possible using a

Hi Ales, I would like to prevent the guests from different subnets start a communication. In other words I have the subnet 192.168.1.0/24 and 192.168.2.0/24 and the guests from 192.168.1.0/24 cannot reach/talk with guests on 192.168.2.0/24 at the same host. Is this possible using a filter like yours? Thank you. Thiago. Em qui, 28 de jun de 2018 às 09:37, Ales Musil <amusil@redhat.com>

On Thu, Jun 28, 2018 at 10:18:57AM +0200, Ales Musil wrote: > Hello, > > I would like to make filter that allows communication only between > specified VMs. Those VMs should be specified by their MAC address. The > filter should extend clean-traffic but I was not able to get it working > with that reference. I have came up with modified clean-traffic which works > fine [1].

Hello, I would like to make filter that allows communication only between specified VMs. Those VMs should be specified by their MAC address. The filter should extend clean-traffic but I was not able to get it working with that reference. I have came up with modified clean-traffic which works fine [1]. Is there a way to achieve the same behavior with reference to clean-traffic? Thank you. Best

I run samba-3 as PDC for a small domain with 4 clients. User A should be allowed to login on all client machines, while logins for the privileged user B should be restricted to 2 machines for security reasons. Any ideas how to manage that? Suggestions for further reading would be highly appreciated? Hans Musil

DeaR all, I am using mob() for model based partitioning, with a dichotomous variable (participant's correct/incorrect response to a test item) regressed onto a continuous predictor related to a given property of the test item. Although this variable is continuous, the value of this variable for many items in this particular analysis is 0. The partitioning criterion is self-reported ability in

Dear List: I just successfully installed R 2.8.0 (under Windows XP SP2, 1GB RAM) and wanted to run update.packages. When I first called chooseCRANmirror I obtained the following error message: ---------------- > chooseCRANmirror() Warning message: In open.connection(con, "r") : kann nicht mit 'cran.r-project.org' auf Port 80 verbinden -------------------- What should I do?

Hi, in oVirt we have come across issue with a missing vnet interface (Original bug report [0]). This happened once in a huge batch of migrations e.g 2 failed out of 1200 and we came to conclusion that this is happening somewhere out of our control as libvirt reports: 2020-05-17 02:34:11,530+0000 ERROR (migsrc/623f6cc1) [virt.vm] (vmId='623f6cc1-d49f-43a4-8170-b5fec01f2897') operation

Hi, I have a problem with GRE tunneling. I read Advanced-Routing HOWTO about this and I did all as is written in this documentation. Even the same example is here which I need for my project. I want create (by means of GRE tunneling or IP in IP tunneling) virtual private network VPN - in first phase without IPsec in other phase with IPsec. I have two local networks distant apart with two routers.

Here is the CS1000 log. Again, the CS1000 using SIP accepts incoming calls just fine. However, using outgoing call files the CS1000 is hanging up after I answer the call. I dont know why? Thanks, for any assistance. Jerry my sip.conf entry is: [Nortel] type=friend dtmfmode=rfc2833 username=XXXXXXXXX disallow=all allow=ulaw allow=alaw

Hi Elio, once more, your email was blocked due to the 40 Kb limits... note that here, NUT Monitor screenshots were not needed. upsc output is sufficient. From: Elio Parisi <E.Parisi at riello-ups.com> > To: "nut-upsdev at lists.alioth.debian.org" < > nut-upsdev at lists.alioth.debian.org> > Cc: > Date: Fri, 23 Nov 2012 15:05:49 +0100 > Subject: Riello patch

I'm forwarding Marco's msg to the list, since it's really too big, and embeds upsc/upsrw/upscmd binaries! cheers, Arnaud -- Engineering Linux/Unix Expert - Opensource Solutions Lead - Eaton - http://opensource.eaton.com NUT (Network UPS Tools) Project Leader - http://www.networkupstools.org Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.fr

On Aug 15, 2015, at 3:15 AM, Marco Walther <marco at sonic.net> wrote: > Hi, > > I just decided to fix some scaling issues for my UPS (TRIPP-LITE SMART1500LCDT). Apparently that issue existed for some time (and I knew about it as well:-() > > See http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 for a thread. > > My little patch is attached (against 2.7.3).

On Tue, 16 May 2017, Dinow Hsieh wrote: > BB. Could you show us the output of command "upsc pcmups"? > > ==> Yes. Below 2 mode were the outputs of command "upsc pcmups" > > battery.charge: 100 > battery.charge.low: 10 > battery.charge.warning: 30 > battery.date: 2010/12/20 ... > ups.date: 2010/12/20 > ups.load: 4 ... > ups.status: OB

On May 17, 2017, at 4:53 AM, Dinow Hsieh <dinow at upspowercom.com.tw> wrote: > > ==> I tried below set-command but it react fail > > dinow-All-Series:~# upsrw -s "ups.delay.shutdown"="30" -u pcmups pcmups at localhost > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > This error is not from the driver. Be sure to specify a NUT

> If you have any more questions regarding this, please use the nut-upsuser > mailinglist instead. Redirected to the appropriate list, sorry. > > Is there a place in the upsmon.conf (or elsewhere) > > file where one may enter something like: > > > > OVERRIDE_BATTERY_CHARGE_LOW 20 > > OVERRIDE_BATTERY.LOW 240 > > > See 'man 8 upsrw'.

OK Eric, Den Tuesday 22 May 2007 08.56.08 skrev Eric S. Raymond: > Kjell Claesson <kjell.claesson at epost.tidanet.se>: > > Or install the udev rules and replug the ups. > > Did that. Manual startup of the driver now works without -u root, > indicating (I think) that the udev rools are doing their job. This >

1 - its on load blinking battery LEDs and not giving proper back up time . APC sua1000i nut-upsdev-request@lists.alioth.debian.org wrote: Send Nut-upsdev mailing list submissions to nut-upsdev@lists.alioth.debian.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev or, via email, send a message with subject or body

Hi all, we should have been found the problem. Attach the patch inclusive of this problem and the previous (Riello IDG400 wrong values & not powering off). Best regards, -----Messaggio originale----- Da: Nut-upsdev [mailto:nut-upsdev-bounces+e.parisi=riello-ups.com at lists.alioth.debian.org] Per conto di nut-upsdev-request at lists.alioth.debian.org Inviato: mercoled? 7 marzo 2018 13:03 A: