similar to: [PATCH] missing -lm in drivers/Makefile

Do your drivers/Makefile.am rules for the resulting new program specify dependencies to use similar to other USB-capable drivers? e.g. ```` blazer_usb_SOURCES = blazer.c blazer_usb.c $(LIBUSB_IMPL) usb-common.c blazer_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm ```` Jim On Sat, Nov 2, 2024 at 2:30?AM William R. Elliot <bill at wreassoc.com> wrote: > Hello again all. > > I am

Hello, all. Some time ago I bought myself a UPS which was advertised as USB-HID. It was a surprise to learn that while it definitely is recognized as USB device, the HID descriptor has no UPS pages at all. The only software it came with was a windows program written in visual basic. Trying to research this topic I found a reference to energizer USB ups driver and learned about variety of

Hello again all. I am trying to use USB functions (non-HID) and I get a linker error for functions that are in the included usb-common.h file. Specifically, at the start, these functions: - warn_if_bad_usb_port_filename - nutusb_open - is_usb_device_supported Clearly the headers are there or I don't think the driver would compile. Can someone point me in the right direction please? Thank

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

On 1/23/07, Henning Brauer <hb-nut@bsws.de> wrote: > good new first: the megatec driverin 2.0.5 now works with the Online > Xanto S3000R here - well, for the very basics. > > the UPS has NO way ofidentifying itself. It also does not respond to > the power ratings query ("F"). I previously used a hacked up fentonups > driver. This means the driver cannot figure out

Hi, Arjen; I am new to linux and not sure how to create the PowerCom-usb driver. So could you please compile powercom-usb file for me. I am happy to test it out with the USB PowerCom Ups. Thanks, Paul MCSE/MCSA/MCP ------------------------------ Message: 2 Date: Mon, 03 Sep 2007 11:13:32 +0200 From: Arjen de Korte <nut+users at de-korte.org> Subject: Re: [Nut-upsuser] Powercom USB UPS is

Hi, I'm having a hard time configuring a Mustek Powermust 600VA ups to work via USB with nut. I read somewhere that nut works OK via the rs232 cable, but unfortunately I don't have a COM port in my computer. The kernel detects the ups as an Xbox pad :) and loads the xpad module. I tried running /lib/nut/megatec with different /dev/ttySx but it displays megatec protocol UPS was not

Hi, the diff inline below adds a new subdriver for snmp-ups to support Huawei UPS, based on an observed walk from a UPS5000-E with a few bits filled in from the MIBs (copy at http://junkpile.org/HUAWEI_UPS_MIB/). Sample output from upsc follows the diff. cheers, Stuart diff --git a/data/driver.list.in b/data/driver.list.in index a0e82fb..fac3d5a 100644 --- a/data/driver.list.in +++

[I'm switching my dev address to @gmail.com instead of @mgeups... please, update your bookmark] Peter Selinger wrote: > > Arnaud Quette wrote: > > > > Here is the status of PSE (Peter Selinger) NUT patches > > for newhidups (hidparser, apc support, ...). > > > > - nut-cvs-patch-REOPEN-2005-08-24: > > approved and applied on Development tree > >

Peter, attached is a proposed patch to fix compilation of generic-hid.c when libusb's usb.h is not in /usr/include (but the -I flag is provided by "libusb-config --cflags"). It fixes the build under OS X, where Fink installs libusb with --prefix=/sw. I changed "usb.h" to <usb.h> so that 'make depend' wouldn't generate a dependency on 'usb.h' with

Hi all, I attached a driver for MiniBox openUPS device ( http://www.mini-box.com/OpenUPS) and a dump of the hid usages. I had the possibility to make a few adjustments to the device firmware for HID usages, and although I haven't managed to produce a good structure many issues from previous firmware were at least fixed and new information added. ATM the driver only shows pertaining

Hi there, been using NUT for ages and recently upgraded to a new server; while I'm waiting for a USB->Serial adapter for Solaris to arrive, I thought I'd play with the newhidups, as the APC UPS I have has a USB port and the new server doesn't have a serial port.... I've got Solaris 10 & newhidups working with the ugen driver up to a point, and that is a read

Hi, fellow NUT gurus; I am having a big issue with our new Powercom Imperial Digital UPS. The UPS is come with a serial over USB port and plug into the usb port on the computer. I am having problem to setup our fedora 7 linux machine talks to the ups. The kernel 2.6.22.1 seems to be able to detect the ups is plug into one of its usb port. But it just couldn't establish a connection with

Hi, fellow NUT gurus; I am having a big issue with our new Powercom Imperial Digital UPS. The UPS is come with a serial over USB port and plug into the usb port on the computer. I am having problem to setup our fedora 7 linux machine talks to the ups. The kernel 2.6.22.1 seems to be able to detect the ups is plug into one of its usb port. But it just couldn't establish a connection with