similar to: Offer of Tripplite OMNIVS1500XL to official nut developer

Good afternoon, I'm trying without much success to monitor a Tripp Lite OMNIVS1500XL using NUT. I checked the compatibility list and saw that this UPS is supported by tripplite_usb. The system is running Debian Stable, but I've downloaded NUT 2.0.3 and compiled from source since the packaged 2.0.1 doesn't include tripplite_usb. I compiled --with-user=nut. My first attempt at

I'm running FreeBSD 6.2 with Nut 2.0.5 installed from ports... I have a TrippLite OmniVS1500XL plugged in, but I'm having little luck with the tripplite_usb module. I have already built and booted a new kernel with UHID disabled so that libusb can grab /dev/ugen0. At first I was able to get the following out of the driver: # USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -u root

i just purchased a tripp lite OMNIVS1500XL and have been attempting to get it working with the usb drivers since it doesn't have a serial port. it hasn't been anywhere near successful and i was hoping someone might be able to point me in the right direction. i run gentoo and this is what i currenlty have installed: nut 2.0.2 libusb 0.1.10a (gentoo modified) usbutils 0.11-r5

I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -DDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (09AE/0001) (002/004) - VendorID: 09ae -

All, I recently purchased a Tripp-Lite OmniVS1500XL and am running NUT on a Centos-based system. Based on the compatibility list I specified the tripplite_usb driver. When I query the unit I get: [root@chryxus ~]# upsc UPS@localhost battery.voltage.nominal: 24 driver.name: tripplite_usb driver.version: 2.0.3-pre2 driver.version.internal: 0.6 input.voltage.nominal: 120

Hello, I wanted to see if there's any chance that NUT will support a few new TrippLite UPSes that we just bought: Sep 9 01:42:25 miko /kernel: uhid0: TRIPP LITE TRIPP LITE OMNIVS1500XL, rev 1.1 I grabbed the devel sources via cvs, but am having trouble building it when I enable the "newhidups" driver: gmake[1]: Leaving directory `/usr/local/src/nut/common' drivers/

Arnaud: I just wanted to chime in here to say that getting these TrippLite USB UPS's supported under a NUT driver would be fantastic! They are simple, inexpensive UPS's (under $100 for 1000VA at Costco) and it would be quite the "deal of the year" to be able to buy these units so cheaply and monitor them directly via Linux. I already have 5 of these units and have

Hi, I'm working with svn trunk rev 815, testing tripplite_usb with this model. I haven't gotten far in my testing, but thought I'd notify the list of this error message. Is this message of any consequence, and is it worthwhile for me to continue testing prior to resolving this? I am happy to help debug any driver issues, so please let me know if I can be of assistance. My platform

Hello all, I just wanted to dump some info here for the archives. Here's the original thread for reference: http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-March/002403.html Charles Lepple did a tremendous amount of work to get my TrippLite USB working on FreeBSD 6.2. I'm running an svn version (nut-2.1.0-r879) to pick up his changes to tripplite_usb. So far, it is

I'm having problems creating a UPS connection to my Tripp Lite UPS System: Ubuntu 8.04.2 Nut 2.4.1 freshly compiled from source. When I do upsdrvctl start everything appears to work and I get :Detected a UPS: TRIPP LITE/TRIPP LITE UPS Using OMNIVS 2001 protocol (2001) Unit ID not retrieved (not available on all models) Attached to Tripp Lite UPS But

Howdy, I had this working with lots of help for a developer before (Charles Lepple), but after upgrading to a somewhat more current version of FreeBSD the patched-up version stopped working. Seeing as this was more than a few years ago, I thought I'd give a new libusb and NUT a try to see if it might work out of the box. So far, no luck. Some info: FreeBSD 6.3 libusb 0.1.12 NUT 2.4.1

i have a OMNIVS1500XL i have used nut for several years on a full sized pc with no problems i am trying to get nut working with this ups on a raspberry pi i tried with a pi 3b running raspbian stretch i tried with a pi 3b running raspbian buster i tried plugging the usb cable straight into the pi i tried using a powered usb hub i tried rebuilding nut from the source package all caused the pi to

There is a branch (Tripp_Lite_Omni) in CVS for the Tripp Lite OMNI USB driver that I have been working on. I think it covers both the OMNIVS1000 and the OMNIVS1500XL, but I do not have one of the latter units to test. If you have one of these, and want to do some testing, please check out the branch and let me know if you run across any problems. I also occasionally make tarball snapshots; email

this probably has no relevance to the subject but i have run a OMNIVS1500XL with the tripplite_usb driver for several years with no problem i am using a a powered usb hub if that make any difference

Hello Daniel! On Tue, Sep 29, 2020 at 6:23 PM Daniel F. Dickinson <cshore at thecshore.com> wrote: > > Hello joão, > > To get more responses you should plaintext email (standard for open source development mailing lists) instead of HTML mail. I just can't believe that I was sending HTML e-mail. Thank you very very much for bringing this to my attention. I hope it is ok now.

Hi 2010/9/23 Tim Gomez > > Hello, > I have been struggling to get the NUT software working with my Arch linux > machine. > > http://www.archlinux.org/packages/community/x86_64/network-ups-tools/ > this link is broken, and I can't find any network ups tools package in this archive! > I have attached a document containing the output of my configuration files. >

On Sep 10, 2019, at 10:40 AM, grumpy at mailfence.com wrote: > > i have a OMNIVS1500XL > i have used nut for several years on a full sized pc with no problems > i am trying to get nut working with this ups on a raspberry pi > i tried with a pi 3b running raspbian stretch > i tried with a pi 3b running raspbian buster The “unable to handle kernel paging request” points to a

On 9/7/2016 7:02 PM, Keith Keller wrote: >> Staying with excellent C6 until the end. > CentOS 7 is yum based, not dnf. "Always Learning" seems to have a distaste for anything new or different than what he already knows. -- john r pierce, recycling bits in santa cruz

Dear Friends, I read in a September 2002 edition of the Economist Magazine that Yahoo! (www.yahoo.com) has signed an agreement with the Chinese government to censor searches on their web site for consumers in China. I am very disappointed in Yahoo! and hope you are too. To let my distaste be known, I am writing Yahoo! and closing my email accounts and un-subscribing from Yahoo!-based mailing

The ext3-2.4-0.9.17-2418p3 patch applies with 0 fuzz against both 2.4.18 pre 4 and 2.4.18 pre3-ac2. Will it be included into 2.4.18 pre 5? -- Ralf Hildebrandt (Im Auftrag des Referat V A) Ralf.Hildebrandt@charite.de Charite Campus Virchow-Klinikum Tel. +49 (0)30-450 570-155 Referat V A - Kommunikationsnetze - Fax. +49 (0)30-450 570-916 "Debugging is