similar to: snmp-ups and constants in snmp_info_t snmp2nut tables

Hi, the diff inline below adds a new subdriver for snmp-ups to support Huawei UPS, based on an observed walk from a UPS5000-E with a few bits filled in from the MIBs (copy at http://junkpile.org/HUAWEI_UPS_MIB/). Sample output from upsc follows the diff. cheers, Stuart diff --git a/data/driver.list.in b/data/driver.list.in index a0e82fb..fac3d5a 100644 --- a/data/driver.list.in +++

Hello list, I've installed NUT on an HP blade server, and I try to get it communicating via SNMP with 2 HP R3000 UPSes, each fitted with a AF465A management card. To do this, I used the snmp-ups driver, and configured it for the "cpqpower" MIB. Communication with the UPSes is established. My problem is that both UPSes constantly return the "OL OB" status which, in

Hi, I got a shiny pair of new PowerWare 9155 UPS (3 input phaes, one output phase), running parallel. Since I didn't want to install a Windows box to run Powerwares software I now went nut(s) ;-) So far things look pretty good, snmp-ups talks to both ups using the pw mib. Though I get these messages, when I start the driver: [ups2] nut_snmp_get: 1.3.6.1.4.1.534.1.4.4.1.3: Error in packet:

Hi, I got a shiny pair of new PowerWare 9155 UPS (3 input phaes, one output phase), running parallel. Since I didn't want to install a Windows box to run Powerwares software I now went nut(s) ;-) So far things look pretty good, snmp-ups talks to both ups using the pw mib. Though I get these messages, when I start the driver: [ups2] nut_snmp_get: 1.3.6.1.4.1.534.1.4.4.1.3: Error in packet:

Hi all! I'm wondering if there's anyone doing any hacking on the snmp-ups driver at the moment. I've started looking at implementing 3phase-support, and this uncovered some rather unpleasant stuff in the snmp-ups driver that I really need to fix in order to get things sane. Those of you that's allergic to SNMP might want to stop reading now, this is rather icky ;)

Hi, Just started using NUT with a Liebert PSI-XR 3000 with an Intellislot web card. It seems I can't get it to run properly. I am using NUT 2.6.0 built from source on Ubuntu 8.0.4 . My build parameters are : ./configure --enable-strip --with-linux-hiddev=/usr/include/linux/hiddev.h --with-udev-dir=/lib/udev \ --prefix=/usr \ --exec-prefix=/ \ --sysconfdir=/etc/nut \

Hi We're currently experiencing some problems that wasn't a problem in 3.0.4. Since SP2 was installed printers get connected \\<ipaddress>\<printer-name> instead of \\<netbios-name>\<printer-name>. It's more common on SP2 machines but it happens on non-SP2 machines. Although these issues are not consistent. Which some windows applications seems to have a