similar to: [HCL] Digitus DN-170014 supported by richcomm_usb

Hello, just want to report a successful installation of the Digitus DN-170020 UPS. Works mostly without problems with the megatec driver and the included cable, a few issues arose: - the toggle beeper command seems not to work for this UPS. - to shutdown and cut the power line, a delay has to be inserted for the driver; without the UPS just beeps but does not switch off. - the test commands do

Greets... ..just bought a cheap UPS today, works in debian 7.0 wrt nut 2.6.4 using richcomm_usb driver... ....output of upsc..... //// root at debian7:~# upsc starpower at localhost device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto

Hello and welcome! Just recently there was a trip down the memory lane with another device with Richcomm-based hardware, and ultimately nutdrv_qx driver happened to support that one: https://github.com/networkupstools/nut/issues/2395 Some key take-aways were: * try starting the driver with bumped debug verbosity (e.g. from command line, or using a `debug_min` setting with NUT v2.8.0 and

Hello. My name is Ilir Danaj. Last week i bought an UPS from Digitus vendor the Model DN-170091 because I have to connect it with the server from the USB port. I check on your site form compability models, but I see the old model of DN-170014. Does it have to update, or I bought a wrong UPS. Thank you in advance. *Best* *Ilir* -------------- next part -------------- An HTML attachment was

Hi, I'm trying to configure my ups with nut which is a locally made one. It uses a rs232 port to talk to the computer and comes with a software called "Powermanager Lite" which is provided by Richcomm and supports Windows, Linux and UNIX. According to the manual it uses the Richcomm circuitry to talk to the computer and uses a drycontact protocol. Unfortunately I couldn't

I am a complete novice in this area so please bear with me. I have installed nut version 2.6.2-1 for my debian 64bit system. I am trying to implement 'nut' for a new VIX2120 home UPS and have determined that I need the richcomm_usb driver [usb 0925:1234]. But it is not in /lib/nut although referenced in the documentation (driver.list) How do get hold of a copy? Due to ignorance I am not

I have a Gentoo linux (OpenRC) desktop connected to a UPS, the brand is Vultech, but lsusb gives me this: Bus 003 Device 006: ID 0925:1234 Lakeview Research and I found an article about this hardware here, someone had it working with the richcomm_usb driver: http://verahill.blogspot.it/2012/12/kstar-australia-1500-va-ups-on-debian.html So, I installed nut and configured my UPS to work with the

Heya, first time posting to a mailing list so please excuse me if I do something wrong :) I'm new to NUT and trying to get things working on my TrueNAS, I have a "Vultech 1500VA" UPS which comes with the software "PowerManager II" and it seems to be using the "richcomm_usb" driver. There are 5 devices in the compatibility list and I tried all of them, sadly to

I set the ups.conf to: driver = richcomm_usb port = auto now it is connected. There were the vendor variable and product id wrong. These are the variables i get in my OMV service output: device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto

On Thu, Dec 4, 2008 at 4:51 PM, Arjen de Korte <adkorte-guest at alioth.debian.org> wrote: > Author: adkorte-guest > Date: Thu Dec 4 21:51:28 2008 > New Revision: 1596 > > Log: > Added new richcomm_usb driver based on the lakeview_usb driver (using libusb). Sorry if I wasn't clear - I was advocating *renaming* the lakeview_usb driver to richcomm_usb. Is there another

----- Forwarded Message ---- From: Terry Powling <terrypowling at yahoo.co.uk> To: nut-upsuser at lists.alioth.debian.org Sent: Sat, 27 February, 2010 22:30:05 Subject: trouble setting up kebo-1000d ups (usb) Trying to setup Kebo ups-1000D with usb port. lsusb Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0925:1234 Lakeview Research Bus 002 Device

Thanks for reply. when i try richcomm_usb or blazer_usb or other usb i get the output of : sudo /lib/nut/usbhid-ups -a trust -DD this is the output: Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 Error: UPS [trust] is for driver richcomm_usb, but I'm usbhid-ups! i tried to set the ups.conf to: [trust] driver = usbhid-ups port = auto vendorid = 0925

> Am 16.03.2018 um 14:21 schrieb isdtor <isdtor at gmail.com>: > > Nicolas Kovacs writes: >> Hi, >> >> I have to install CentOS 7 for a client, to act as cache & filtering >> proxy using Squid. >> >> I'd like to use this piece of specialized hardware : >> >>

Hello guys, Please help me to resolve the issue. I bought 'SVEN Power Pro+ 500 USB' UPS few days ago and tried to setup NUT 2.6.0 to work with it. blazer_ups driver doesn't recognize the UPS :( The Manufacturer provides 'PowerD' software for linux with installation instractions on a CD (see example below). --------===------- Welcom to PowerManager System!

Folks, I'm fairly new to this whole Linux UPS thingie, but I'd quite like to have a look at getting my UPS to work under Linux and would be grateful for any help in getting a driver. I have a reasonable working knowledge of Linux and software development, and thus am happy to modify config files, alter kernel settings, etc, although I'm no C guru. I have a Kebo UPS-650D, which

Le 16/03/2018 ? 14:29, Leon Fauster a ?crit?: > We use a DIGITUS USB2Serial Converter (Prolific based USBID: VID:067B PID:2303) and then > > screen /dev/DEVICE 115200 Thanks everybody for your numerous suggestions. As soon as I have the hardware, I'll fiddle with it and then report back my findings. Cheers, Niki -- Microlinux - Solutions informatiques durables 7, place de

On 03/16/2018 10:09 AM, Nicolas Kovacs wrote: > Le 16/03/2018 ? 14:29, Leon Fauster a ?crit?: >> We use a DIGITUS USB2Serial Converter (Prolific based USBID: VID:067B PID:2303) and then >> >> screen /dev/DEVICE 115200 > > Thanks everybody for your numerous suggestions. As soon as I have the > hardware, I'll fiddle with it and then report back my findings. >

Hi I am running FC5 with nut coming from the fc5 extras repositories. I am trying to configure a Gamatronic D-Compact ups. The cable that came with the ups has a serial connector on one end and a usb on the other. cat /proc/bus/usb/devices produces T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P:

Hi all, Have been using Nut on Linux for over ten years now and find it brilliant. Thanks. Just upgraded to 2.4.2 and have the 5 or 6 models of UPS's that we use (apcsmart, megatec, mge-shut, surgemax, digitus) all working including the MGE Pulsar Evolution 1100 on a USB connection using the usbhid-ups driver. Running on SLES9. Old but we still have a few servers out there running

Hello, i`m looking for a nut-compatible low-power UPS (need to hook a home-server+dsl equipment with a load of ~50W to that) which should be as energy efficient as possible and be also affordable. i currently have an older powerwalker which constantly burns ~15W for nothing. The transformer inside getting that hot that you don`t like to touch it and i think 15W out of 50 is a little bit high