similar to: Problems with blazer_usb. Driver will not shut down my UPS

(Keep the list CCed) 2014/1/4 Eirik Skorstad <eskorsta at hotmail.com>: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > >> Assuming shutdown.return works when issued via upscmd (does it >> work?), the problem seems to be that your UPS doesn't accept a >> shutdown.stop when there's no shutdown pending (or, maybe, the UPS >> doesn't

Dear Nut-UPSdev Team, First of all I would like to appreciate the great job you are doing. Your work is very important and helpful for all UPS users. I found that you show compatibility with blazer_ser and blazer_usb for six of our models. Please inform me how we can make it happen that all our models become compatible? Who from your team added the compatibility with PowerWalker VI 850 LCD?

Hi, There seems to be a problem turning of the inverter on a Mecer online 1000VA UPS. OS: Debian Wheezy Nut: Installed via apt - version 2.6.4-2.3 Debug output from driver. root at proxmox1:~# /lib/nut/blazer_usb -DDDDD -a mecer -k Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4) 0.000000 send_to_all: SETINFO driver.parameter.port "auto" 0.000023

Hi, They say one should never argue with people that know more than you, so please bear with me. On 2013/10/24 09:47 PM, hyouko at gmail.com wrote: > The driver is expecting either 'ACK' or no reply at all in case of > success and the command itself echoed back in case of errors. > On the other hand, your UPS replies '(ACK' in case of success and > '(NAK' on

Hi Johan, The driver is expecting either 'ACK' or no reply at all in case of success and the command itself echoed back in case of errors. On the other hand, your UPS replies '(ACK' in case of success and '(NAK' on failure. So.. when the driver first tries to stop pending shutdowns and you get the 'operation not permitted' error, the driver interprets it as a

Hi, I have a small home-use UPS for my home server from powerwalker (http://powerwalker.com/de/index.php?option=com_content&task=blogcategory&id=63&Itemid=106 sorry I only found a german version). It has a USB and a serial connector. lsusb lists it as "06da:0003 Phoenixtec Power Co., Ltd", in /proc/bus/usb/devices it sais "Manufacturer=OMRON" and

http://www.zigor.com/uk/index.php/en/products/upssystems/danubioseries Ships with UPSilon 2000 software, and appears to work with blazer_usb to a certain extent with the following config: [danubio] driver = blazer_usb langid_fix = 0x409 port = stupidly, I seem to have to set this even though it's ignored vendorid=0001 productid=0000 Yes, vendor 0001,

Hello, I have two UPS from PowerWalker: VFI 1500RM LCD and VFI 3000RM LCD both equiped with SNMP card, but NUT with snmp-ups does not support them. PowerWalker declare support RFC1213, RFC162 but there is a problem with some snmp values: # upsdrvctl start Network UPS Tools - UPS driver controller 2.6.4 Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.4) Detected 3K on host 10.0.0.236

Hello! I'm a total noob in the NUT world, and have 0 experience dealing with Linux distributions. Since NUT is poorly ported to Windows it's driving me crazy, I hope you can help me. I have, after 3 days of painful reading, testing and failing, successfully set up NUT to communicate with my cheap-ass line-interactive 1000VA Chinese UPS (just no brand at all, it is a locally rebranded UPS,

Hello, I'm having problems when trying to execute an deep battery test. UPS Model: PowerWalker VI 1000. root at HP-Opreon:/# upscmd PowerWalker at localhost test.battery.start.deep Username (root): admin Password: Unexpected response from upsd: ERR ACCESS-DENIED /etc/hosts.allow: <code> # /etc/hosts.allow: list of hosts that are allowed to access the system. # See

Hello list, just a quick email to report that the following UPS was supported (mostly) out of the box: Model: PowerWalker VI 850 LCD Driver: blazer_usb upsc Output (please note I have manually populated the high and low voltages): battery.charge: 100 battery.voltage: 13.50 battery.voltage.high: 13.5 battery.voltage.low: 10 battery.voltage.nominal: 12.0 beeper.status: enabled device.type: ups

On Aug 1, 2013, at 8:15 AM, Charles Lepple wrote: > On Jul 29, 2013, at 7:12 AM, James HORLEY wrote: > >> There?s a software advised by the constructor that work on linux (http://www.power-software-download.com/viewpower.html), unfortunately it?s heavy (tomcat and java) and I don?t find it as flexible as NUT. > > We have a development branch called "voltronic-driver"

I'm running Ubuntu 14.04.1 with nut 2.7.1-1ubuntu1, using a Powerwalker/INNO TECH ups. It used to working fine, but lately blazer_usb just executes a few commands and then terminates with a "Got disconnected by another driver" message. Any suggestions? Example output from blazer_usb with loads of debug: # /lib/nut/blazer_usb -DDDDDDDDDDDDDDDDDDDDDD -a nasups Network UPS Tools -

On Wed, 14 Oct 2015, Davide Baldini wrote: > the full output of upsc ${myups} is at https://pastebin.mozilla.org/8849188 ; > in particular: > > ups.delay.shutdown: 30 > ups.delay.start: 180 > > However, the UPS does not shut down, not immediately nor well after the > timeout of the command: upscmd -u admin -p mypass myups shutdown.return 360 What does "ps aux |

I compile nut with the voltronic-driver on my computer then I've copy the driver "/lib/nut/voltronic_ser" on the server. I can now shutdown the ups using "upscmd -u admin myups shutdown.return". My first question is, is it really ok to only take the driver whithout taking the whole package? I'm using upssched to shutdown server after 15mn on battery, the

Hello i need your help regarding the following issue : i have a hero touch ups from infosec. it is connected via USB to a raspberry pi 3. i?ve configure ups.conf file as below [HERO] driver = blazer_usb vendorid = 0665 productid = 5161 either with port = auto or port = /dev/hidraw0 or port = /dev/ttySo the connection never works i get the

On Monday 22 June 2020 09:50:50 Larry Fahnoe wrote: > On Mon, Jun 22, 2020 at 8:27 AM Gene Heskett <gheskett at shentel.net> wrote: > > > On Jun 22, 2020, at 8:52 AM, Gene Heskett wrote: > > > > pi at rpi4:~ $ upscmd myups *test.battery.start.quick* > > > > Username (pi): > > > > Password: > > > > Unexpected response from upsd:

I'm pretty sure, I've install pkg-config, but I will check it monday after my holliday. This is my test steps: - Shutting down nut-client (upsmon) - Only nut-server (driver + upsd) is running - upsmon.conf have been revert to normal shutdown, no upssched - upsc myups return ups stats then: upsmon -K -DDDDD, here is the output: kill: No such process UPS: myups at

[please keep the list CC'd] On Jul 4, 2015, at 8:09 AM, Sami M?ntysaari <sm at sami-mantysaari.com> wrote: > I have reloaded it, but still the same result. > > Any ideas? Not sure. Can you provide any additional details about the OS and version of NUT? > snip from syslog: > <code> > Jul 4 15:04:25 HP-Opreon kernel: [66083.548290] usb 2-1: usbfs: >

Hi. I'm from Russia. I try to use NUT with PowerWalker vi 400 se (usb). I use FreeBSD 7.0 (amd64) and megatec_usb driver. Settingup the NUT with FreeBSD installation procedure (Thierry Thomas, from FreeBSD). PowerWalker connect to the computer by usb cable on port usb0 (uhib0). NUT don't starting, and talk to me that supporting device not found. Please, help me. Thank's! With best