similar to: [HCL] Syndome Era Series 500VA 400W supported by blazer_usb

Device web page http://www.samurai-power.com/samurai-smart-1000-lcd UPS is marked as Micropower LCD 1000, but in Slovenia is remarked as Samurai LCD 1000 [ups] driver = blazer_usb port = auto vendorid = 0001 productid = 0000 upsc ups Init SSL without certificate database battery.charge: 100 battery.voltage: 27.40 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal:

Hi, I am using a ALLNET 91500 UPS with blazer_usb driver /usr/lib/ups/driver/blazer_usb -a ups91500 -L Network UPS Tools - Megatec/Q1 protocol USB driver 0.10 (2.7.1) I have this settings: upsc ups91500 at localhost battery.charge: 100 battery.runtime: 12000 battery.voltage: 27.50 battery.voltage.high: 27.3 battery.voltage.low: 18.0 device.type: ups driver.flag.novendor: enabled driver.name:

Hi to all and happy new year! I'm writing here as I'm trying to get nut supporting the UPS in the subject; I didn't check well before buying and nowI discovered this is kinda bad hardware (it doesn't have a valid USB id, it just reports 0000:0001 and linux support doesn't really work as they stated), but before changing it I wanted to try to find a solution to get it work with

Hello, I have a UPS branded as "Energit MXE II" that comes with the infamous Winpower software (as already discussed in this old thread <http://nut-upsdev.alioth.debian.narkive.com/m0FWk43o/blazer-usb-compatibility-with-ippon-backpro-upses-phoenix-power-co-ltd-usb-to-serial-controller>). This same UPS appears to be sold as "Centralion Titan Elite" and maybe other names

Hello, I am trying to make my UPS system working with NUT but with no success. I got "No supported UPS detected" message. I use the blazer_usb driver since it was proposed to me by the web site. My NUT version is : 2.7.1 (installed from standard RPM), release 2.41 The UPS identification: INFOSEC X4 RM PLUS linux-2qya:~ # /usr/lib/ups/driver/blazer_usb -a infosec Network UPS Tools -

Hello all, I've run into the issue described here: http://lists.samba.org/archive/samba-technical/2010-September/073075.html To sum it up, I installed samba4 from git on a debian wheezy system. Initially, I was able to join Windows 7 clients to the AD controller. However, trying to get freenas 8 to join has been failing. In the end, trying to get it to work I changed administrator's

> some of our devices uses Voltronic Q1 protocol and we tried the Krauler > Subdriver (it was the one with the right "commands", Q1, F, etc.), but the > issues were 2: > - first: the Krauler Subdriver expects a different number of bytes in answer > because in debug i see "Short Reply" (if i send Q1 to the UPS it will answer > with 47 Bytes, CR terminated),

Reading the most recent news, we can see that the time has come to break the WinIntel monopoly on the world. Many devices are emerging, many architectures are being developed. The opensource community is getting great visibility. We should start thinking in bringing wine to this new scenario that is approaching. Many surprises are coming for the years to come. Why not we bring wine to devices such

So I did a lot more debugging on this. I wrote a program that draws a triangle to an fbo, and then blits that to fb 0. If I draw the triangle with glBegin(GL_TRIANGLES); glColor3f(1, 0, 0); glVertex3f(-0.6*128 + 128, -0.75*128 + 128, 0.5); glColor3f(0, 1, 0); glVertex3f(0.6*128 + 128, -0.75*128 + 128, 0); glColor3f(0, 0, 1); glVertex3f(128, 0.75*128 + 128, 0); glEnd(); Then all

Hello, Excuse the blatent self-promotion and certain degree of off-topicness, but I thought people here might find this of interest. We just recorded a radio show using Fideliphone (www.fideliphone.com) which uses CELT. Not sure exactly which version but the most recent release of Fideliphone was in May so it's probably not the most recent version. Anyway it performed beautifully! I

My apologies to the list, as the last patch was not correct. It did no harm, but was to the trailing comma on the structure above the enum I was targeting. This patch is correct. Signed-off-by: Bruce Rogers brogers@novell.com - Bruce _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

Hello, I've just finish a new driver for the Nitram UPS Elite 2005 500VA (compiled and tested with nut-2.0.1 and nut-2.1.0). Currently, all Nitram UPS are made by CyberPower, but the protocol is different than cyberpower.c. I don't have other model to test with, but I think this driver could monitor all Nitram 2005 UPS. I don't have the protocol specifications and thus some parts

Arjan, I am forwarding your email to the nut-upsuser mailing list. I am not an expert on the Powermust driver; hopefully somebody on the mailing list will be able to help you! -- Peter Arjan DJ wrote: > > Dear Peter, > Some days ago I bought a Sweex UPS (500VA) and now I have set up NUT (using > the Powermust driver) and everything is working fine. Invoking upsmon -c fsd > gives

Hi, FYI for all whom have the Sweex manageable UPS. I got my sweex manageable UPS500VA working with NetworkUPSTools using the ippon driver. Here is my the ups.conf file: [ups] driver = ippon port = /dev/cuad0 desc = "Server" Has anyone tried the ippon driver with Sweex 600VA, 700VA, and 800VA models? Regards, Jan

Hi to everyone! I'm posting here after digging around the nut-upsuser and nut-upsdev mailing list, hoping I didn't miss something important. I'm trying to make my ups working with nut: it's a Tecnoware ERA LCD 0.85 which uses the so-hated UPSilon 2000 software to connect via usb. Personally I checked and seems that this junk software only works from windows, I'm trying to

Hello, I'm trying to debug why fbo-copyteximage-simple is failing, and I'm... failing. It's an extremely simple test. I'm pretty sure that the copyteximage part of it has nothing to do with the failure, at least it behaves identically when I just return tex instead of copiex_tex. Without any modifications, the test just renders one big red square. I think there's something

Hi all, First off thanks you for such a great tool - my searching so far indicates that the developers and community behind nut are committed and doing a great job! Background: I've just purchased a Plexus 500VA UPS for ebuyer because it was cheap. I didnt expect much but I've seen a few references to people getting the same and similar models to work with NUT so was encouraged to try!

Device manufacturer: Fideltronik INIGO Device name: Viper 1200 Device type: UPS Bus type: USB WWW: http://fideltronikinigo.com/viper/viper-1200/ " nut-scanner -U" output: [nutdev1] driver = "blazer_usb" port = "auto" vendorid = "0001" productid = "0000" product = "MEC0003" vendor =

Hi all, I am trying to re-compile some "unmaintained" (it seems) packages, namely rSoNIA and dynamicnetwork from: http://csde.washington.edu/~skyebend/rsonia/rsoniaDemo/ These packages predates R 2.10.0 so they need to be recompile. After split the single big file in /man in each packages into a file for each function + some minor fix, I successfully manage to recompile and load

Lyonn CTB-1200 root at frambuesa:~# upsc lyonn at localhost battery.voltage: 27.20 battery.voltage.nominal: 24.0 beeper.status: enabled device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 5.0 input.frequency: 49.9 input.frequency.nominal: 50 input.voltage: 213.3