similar to: tripp lite omnivs1500xl and usb

Good afternoon, I'm trying without much success to monitor a Tripp Lite OMNIVS1500XL using NUT. I checked the compatibility list and saw that this UPS is supported by tripplite_usb. The system is running Debian Stable, but I've downloaded NUT 2.0.3 and compiled from source since the packaged 2.0.1 doesn't include tripplite_usb. I compiled --with-user=nut. My first attempt at

I'm running FreeBSD 6.2 with Nut 2.0.5 installed from ports... I have a TrippLite OmniVS1500XL plugged in, but I'm having little luck with the tripplite_usb module. I have already built and booted a new kernel with UHID disabled so that libusb can grab /dev/ugen0. At first I was able to get the following out of the driver: # USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -u root

All, I recently purchased a Tripp-Lite OmniVS1500XL and am running NUT on a Centos-based system. Based on the compatibility list I specified the tripplite_usb driver. When I query the unit I get: [root@chryxus ~]# upsc UPS@localhost battery.voltage.nominal: 24 driver.name: tripplite_usb driver.version: 2.0.3-pre2 driver.version.internal: 0.6 input.voltage.nominal: 120

I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -DDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (09AE/0001) (002/004) - VendorID: 09ae -

Hello, I wanted to see if there's any chance that NUT will support a few new TrippLite UPSes that we just bought: Sep 9 01:42:25 miko /kernel: uhid0: TRIPP LITE TRIPP LITE OMNIVS1500XL, rev 1.1 I grabbed the devel sources via cvs, but am having trouble building it when I enable the "newhidups" driver: gmake[1]: Leaving directory `/usr/local/src/nut/common' drivers/

Hi Patrick, in February, you tried to post the below message to the nut-upsuser list, but the post was rejected because you were not subscribed to the list. Unfortunately, you did not subscribe and re-post it. Anyway, I have been working on Tripp-Lite support for newhidups recently, and I wonder if you have any feedback. Did you ever get this device to work? >From the information you sent,

On 09/11/2017 10:49 AM, Sam Varshavchik wrote: > Mike writes: > >> On 9/10/2017 6:41 PM, Sam Varshavchik wrote: >> > Dutchman01 writes: >> > >> >> Hello all, >> >> >> >> >> >> >> >> I request a new NUT release as current dates back to March 9, >> 2016: NUT 2.7.4 >> >> >> >> The

Howdy, I had this working with lots of help for a developer before (Charles Lepple), but after upgrading to a somewhat more current version of FreeBSD the patched-up version stopped working. Seeing as this was more than a few years ago, I thought I'd give a new libusb and NUT a try to see if it might work out of the box. So far, no luck. Some info: FreeBSD 6.3 libusb 0.1.12 NUT 2.4.1

Hi all, I gave up on a Tripplite OMNIVS1500XL due to it failing to work on the version of Nut in FreeNAS (and having experienced numerous issues on Debian Jessie as well due to incomplete/unknown protocol elements causing USB problems and Debian Wheezy doesn't even recognize the device). Since the issue is likely lack of information (i.e. unknown protocol) I'm not sure my offer of device

Arnaud: I just wanted to chime in here to say that getting these TrippLite USB UPS's supported under a NUT driver would be fantastic! They are simple, inexpensive UPS's (under $100 for 1000VA at Costco) and it would be quite the "deal of the year" to be able to buy these units so cheaply and monitor them directly via Linux. I already have 5 of these units and have

Hi, I'm working with svn trunk rev 815, testing tripplite_usb with this model. I haven't gotten far in my testing, but thought I'd notify the list of this error message. Is this message of any consequence, and is it worthwhile for me to continue testing prior to resolving this? I am happy to help debug any driver issues, so please let me know if I can be of assistance. My platform

I'm trying to get nut to work with a Cyberpower 900AVR. There are many different products known by this name, but this one has the extra name 'BC900D'. I am told by a cyberpower tech that this one should talk exactly the same USB protocol as the 685AVR, which was recently made to work with newhidups. Unfortunately, when I run the SVN checkout (trunk) of nut-2.1, I get: sstreet

There is a branch (Tripp_Lite_Omni) in CVS for the Tripp Lite OMNI USB driver that I have been working on. I think it covers both the OMNIVS1000 and the OMNIVS1500XL, but I do not have one of the latter units to test. If you have one of these, and want to do some testing, please check out the branch and let me know if you run across any problems. I also occasionally make tarball snapshots; email

I'm having problems creating a UPS connection to my Tripp Lite UPS System: Ubuntu 8.04.2 Nut 2.4.1 freshly compiled from source. When I do upsdrvctl start everything appears to work and I get :Detected a UPS: TRIPP LITE/TRIPP LITE UPS Using OMNIVS 2001 protocol (2001) Unit ID not retrieved (not available on all models) Attached to Tripp Lite UPS But

Hi Patrick, I didn't get further bug reports from you, so I have now listed your device as "supported" by newhidups. Last I saw as of your below message, the driver was working as expected. If there are any future problems, let me know! -- Peter Patrick Nolan wrote: > > Remember me? Back in May we exchanged some messages about my Tripp-Lite > UPS. My boss has gone on

# export USB_DEBUG=5 # /usr/local/ups/bin/usbhid-ups -a CP550SLG -DDDDD Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 0.000000 debug level is '5' 0.000426 upsdrv_initups... usb_set_debug: Setting debugging level to 5 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001 usb_os_find_busses: Found 002

Hi all: I am trying to get a TrippLito OMNI1000LCD working with nut. Even with the development branch, I get the following.... upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: HID UPS driver 0.13 (2.1.0) Warning: This is an experimental driver. Some features may not function correctly. Detected Tripp Lite TRIPP LITE UPS on port /dev/usb/hiddev0

Hello, I have been trying to get a TrippLite Internet Office 750 UPS to talk to my Linux PBX for a couple of evenings now and I'm getting nowhere... I tried searching the list archives before posting here (I'm sure I'm not the first one to try to get this going) but they seem to be offline... The UPS is unfortunately USB based but I thought I'd give it a try anyway. Here is

Joel Peshkin wrote: > > I hacked in the following additonal changes... > > Index: newhidups.c > =================================================================== > RCS file: /cvsroot/nut/nut/drivers/newhidups.c,v > retrieving revision 1.1.1.1.8.6.2.21 > diff -u -r1.1.1.1.8.6.2.21 newhidups.c > --- newhidups.c 7 Nov 2005 22:14:20 -0000 1.1.1.1.8.6.2.21 > +++

I have a Tripp Lite OMNI900LCD. It has a usb connector and claims to be USB/HID. I haven't been able to get it to work with newusbhid or tripplite_usb. Here's lsusb -v output: Bus 001 Device 013: ID 09ae:2005 Tripp Lite Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level)