similar to: What are some effective power status solutions?

Hey Jarett, 2009/2/24 <jarett.stevens at usermail.com> > After upgrading to the 2.4.1 version, I wasn't able to read as many > variables from my UPS. After a bit of experimentation, I determined that > the firmware on my UPS was different than what is currently in the > apcsmart driver, though it had worked before. I located my firmware > version (5ZM), and added in

Greetings to all, I recently connected a Tripp Lite SMX500RT1U unit to a Synology NAS (basically a Marvell ARM equipped box running a custom 2.6.24 Linux). I tried using the tripplite_usb driver contained in nut 2.4.1 with not much luck. It does read the model ID and VA rating properly, but fails at everything else - mains voltage (this is a 230VAC EU model), battery config, unit status etc.

I had a power hiccup yesterday and a server connected to a Best Ferrups 18KVA shutdown. The problem is that the UPS is reporting remaining runtime in minutes but nut treats it as seconds (so nut thought it only had 46 seconds left). Simple patch: diff -urN nut-2.2.1-dist/drivers/bestfcom.c nut-2.2.1/drivers/bestfcom.c --- nut-2.2.1-dist/drivers/bestfcom.c 2008-06-13 14:04:07.000000000 -0500

I've got a dumb Western Electric payphone and some homebuilt hardware to control the coin relay which is accessible to Asterisk through the AGI interface. I'd like to be able to set the state of the coin relay to collect at the end of a call if a called party answers. [Hey, I admit this project is being persued just for the fun of it ] Looking through the documentation, there is a way to

[Going a bit off-topic here, and going to do a bit of a deep-dive on RF stuff, but maybe it will be useful to Chris] On 05/24/2017 12:20 PM, Valeri Galtsev wrote: > It is insightful, yet... There are a bunch of other factors that may need > to be taken into account. Angular transmission pattern of satellite (horn? > or is it yagi? antenna) vs ground based (monopole? or dipole? antenna -

A new intel-gpu-tools quarterly release is available with the following changes: General changes: - Bumped used C standard to gnu11. (Lucas De Marchi) - Bumped required meson version to 0.44. (Petri Latvala) - Introduced meson options for explicit control over optional dependencies. (Petri Latvala) - Added a meson option to set runpath for the installed executables. (Petri Latvala) -

One work-around would be to create a hidden share that only Domain Admins can access. The use "force user=root" on that share. Then you'll be able to change ACL's and not be root. Josh > -----Original Message----- > From: Tanstaafl [mailto:tanstaafl_bh@netzero.net] > Sent: Thursday, July 25, 2002 1:36 PM > To: 'Samba List' > Subject: Re: [Samba] Changing

Hi list, I''m new to ferret and I wonder what is the best way to search if I know one fields id and want to search on its content. I have experimented with FilteredQuery but I don''t know if this is the best way. Eg. index = Index::Index.new(:path => ''/tmp/all'') @dbh = Database.instance.connect result = @dbh.exec("SELECT pk_fulltext_id, fulltext_text

Probably this is an old question, but i''m not able to find nothing about... So, i''ve just started to play with tc to limit the transfer speed to my hdsl connection. I''m using the tbf and the command # tc qdisc add dev eth0 root tbf rate 10kbit latency 50ms burst 1000 Then i''ve tried to transfer a big (20 Mbyte) file onto my lan, using ftp and the client

Hallo R-users, I would like to know if there is a way to get the effective degrees of freedom in local polinomial regression. At the moment, to carry out the local polinomial regression, I am using the function locpoly() in library KernSmooth (I need to estimate both the regression function and its derivatives, up to the 3rd one). Thanks, Simone -- Simone Vantini MOX - Modeling and

Hi! I want to use the DRC package in order to calculate the IC50 value of an enzyme inhibition assay. The problem is that the estimated ED50, is always out of the fitted curve. In the example below, I had a ED50 value of 2.2896, But when I predict the response level for this concentration I get a value of 45.71 instead of the expected value of 50. This is my data: #Dose unit is concentration

hello folks, I am in the process of integrating a linux box in our windows NT/95/98 network, but so far I am having little luck with getting samba to work. I am using Red Hat 5.1 with KDE, the samba version that I installed is 2.0.3.1. I want access from other machines as guest only and to achieve that I created a guest account called guest on thel inux machine. My problem is the following.

Hi All, The PRE or GVNPRE is not effective for the below use case. int sum; int phi =30; void f (int i, int *a) { if ((a[i] << (1)) > -15) sum =(phi+ 0x7fffffffL )/ a[i]; if ((a[i] << (2)) > -15) sum =(phi + 0x7fffffffL) /a[i]; } respective asm (clang on trunk ) #clang -O3 -S test.c BB#0: # %entry pushl %edi pushl %esi

http://bugzilla.mindrot.org/show_bug.cgi?id=1301 Summary: Repeated ~. need an intervening ENTER to be effective Product: Portable OpenSSH Version: 4.5p1 Platform: ix86 OS/Version: Linux Status: NEW Severity: normal Priority: P4 Component: ssh AssignedTo: bitbucket at mindrot.org ReportedBy:

Hi, Which is today, according to you, the most cost effective and Asterisk friendly T.38 ISDN-PSTN gateway for someone looking to build enterprise class services ? I've been thinking of Audiocodes, Mediatrix, Cisco boxes but PCI cards inside Linux computers would either be OK from me. The capacities I'm looking for are : - SME range: 1 x BRI and a couple of simultaneous fax calls -

I've been having problems segfaulting when receiving faxes. So I tried FFA. I used the register utility and my license is in /var/lib/asterisk : ls /var/lib/asterisk/licenses/ -l total 4 -rw-r--r--. 1 root root 325 Jun 5 22:41 FFA-DNCXXXXXXX.lic but: Executing [17772822954 at FaxIncoming:4] ReceiveFAX("SIP/ec2faxcall18-00000002",

Hi, When i use "virsh attach-device rhel disk.xml" when the guest is booting,then i can't find the disk in the guest after booting.But i can find it by "virsh domblklist rhel",and when i want to detach it from the guest and use "virsh detach-disk rhel vdb", i still can find the disk by "virsh domblklist rhel" The disk.xml is like: <disk

what exactly is the planned day and time that centos4 will be moved removed from working "yum update" & current mirrored functionality ?? march 1st or a day or two later please? - rh

Hello to All. I have a system with FreeBSD 6.1 Release, Dovecot 1.0 Release Candidate 7. I am a novice user in unix world and when my first deal with with Dovecot is Virtual users. User databes in master.passwd file (like a /etc/master.passwd) created by "pw". All works fine, BUT --- If user exclusivly virtual (there is no user with same name in system) IMAP folders are created normal

Hello dovecot list. I have multiple passdb/userdb, some use %Ln some use %Lu. How to make auth_username_format effective only within passdb/userdb?