similar to: /dev/ttyS0 permissions problem

Hello, I'm a new to NUT and I'm having some setup problems. Here's my setup: Nut 2.0.2 Gentoo Linux 2.6.13-r3 CyberPower AVR900 According to the hardware compatibility guide this setup should work. Here's what I get: root@gentoo (0) [552] % upsdrvctl start Network UPS Tools - UPS driver controller 2.0.2 Network UPS Tools - CyberPower driver 1.00 (2.0.2)

Hello, I'm trying to run my weather station (Davis WMII) on wine 0-9-58 and OpenSuSe 10.3. After installation of WeatherLink 5.7.1, I try to communicate via COM1 but the program can't find it and even not test with a loop plug in COM1. I have changed the mode to 0777 for the serial devices in /etc/udev/rules.d/50-udev-default.rules and rebooted. /home/sel/.wine/dosdevices reveal that

Hi all, I know there are some howto's about Powerware 5115 and Ubuntu, but I can't still get that thing working. Can someone give some light... 1. Powerware 5115, serial port (ttyS0) 2. Ubuntu 6.06.1 as LTSP-server As reference: http://gentoo-wiki.com/HOWTO_NUT http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/ --- a. I try to start driver as root. root at

Hi all, I know there are some howto's about Powerware 5115 and Ubuntu, but I can't still get that thing working. Can someone give some light... 1. Powerware 5115, serial port (ttyS0) 2. Ubuntu 6.06.1 as LTSP-server As reference: http://gentoo-wiki.com/HOWTO_NUT http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/ --- a. I try to start driver as root. root at

I have a new APC Smart-UPS SUA2200RM2U. I've had no success with the manufacturer's PowerChute software and smart signaling, so I have decided to try NUT. The smartups driver can't make contact through the serial port. Since this is rack-mounted, it comes with a 940-1524 serial cable. As far as I can tell, this is supposed to work with smart signaling. Here's my ups.conf:

A new kvm guest on a CentOS6.5 x84_64 host is set up to make use of the serial port (virt-install ... --serial dev,path=/dev/ttyS0) <serial type='dev'> <source path='/dev/ttyS0'/> <target port='0'/> </serial> <console type='dev'> <source path='/dev/ttyS0'/> <target

Hello! I got my hands on a CyberPower 1500AVRT, and i'm trying to get it connected to my Gentoo machine. I've followed all the basic guides on setting up NUT and UPS' but have had no luck. My current ups.conf is: [cyberpower-gentoo] driver = cyberpower port = /dev/ttyS0 desc = Workstation Upon running /etc/init.d/upsd start or upsdrv start I get: * Starting

I'm trying to work out how to set up a custom udev rule to override permissions on serial ports (/dev/ttyS* and /dev/ttyUSB*) on CentOS 5.3 The default rule, in /etc/udev/rules.d/50-udev.rules has the line: KERNEL=="tty[A-Z]*", NAME="%k", GROUP="uucp", MODE="0660" and I would like the mode to be 0666 Various docs on web say that you

This change updates a guest which uses Xen's xvc0 to use ttyS0 instead. In a related change, it also makes a console a 'standard device' will always be configured. --- lib/Sys/VirtV2V/Converter.pm | 5 +++- lib/Sys/VirtV2V/Converter/Linux.pm | 46 ++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 1 deletions(-) diff --git

Not the same as the other treath, but also an tty access problem. I have an old an cheap digital camera wich isn't supported by gphoto(2). I can get the program running under wine only it shows me: err:dosfs:DOSFS_CreateCommPort Couldn't open /dev/ttyS0,115200 ! (check permissions) err:file:CreateFileA Couldn't open device 'COM1'! FIXME:pthread_rwlock_rdlock

Until last week my wine runs a Microcontroler Programmer under serial port very well, But in this week have problems to work wine for serial ports on my new Mandrake 8.1. Well, in Mdk 8.1 there is no ttyS0 devices but links to /dev/tts/0 and /dev/tts/1 I realy don't remember how was until last week, but I think about users and perms to devices. I try to chmod a+rw for /dev/tts/0 and tts/1

Hello everybody, this is my first post to this list - normally I take some time to read some messages first to get an impression of the List, but I have a pressing question to ask, so please forgive me if I miss the right tone... I just installed NUT 2.0.2 and try to get it working with our Effekta MT 1500. In the Drievers List I found this entry: "Effekta" "MI/MT/MH"

Hello all, Rebooted my server by mistake (don't ask...) - everything was working OK before the reboot, but after the reboot, NUT stopped working - so had a look and I found I couldn't track the exact problem - I'm quite stumped as there's nothing indicating that there's a problem, but it just doesn't work... In a nutshell.... destiny:/usr/local/ups/bin# ./upsdrvctl

Hello all, Rebooted my server by mistake (don't ask...) - everything was working OK before the reboot, but after the reboot, NUT stopped working - so had a look and I found I couldn't track the exact problem - I'm quite stumped as there's nothing indicating that there's a problem, but it just doesn't work... In a nutshell.... destiny:/usr/local/ups/bin# ./upsdrvctl

Hi, I have wine without Windows instalation and would like to use my HP Coolpix camera unload software. After installation I allowed direct read/write to COM ports in wine.conf, but the program complains there are no COM ports at all. If I run wine --debugmsg +file +relay, I get something like wine works with COM2 (COM1 is mouse) and missing wineoss.drv, MFC42LOC.DLL and reg.dat. How can I

Hi, I've browsed the archives back for a few months and nothing has jumped out at me as being helpful, but since there doesn't seem to be a search facility it's certainly possible I've missed what I'm looking for. Anyway, I wonder if someone can help me. I've very recently installed nut 2.0.4-r1 on a gentoo box and am in the initial stages of configuration and testing.

I have been struggling with setting up two serial ports on an HP/Compaq D512S (Intel P4) under CentOS-5. I am not at all sure why these things were not auto-configured when I initially installed the CentOS system from CDs but they were not. I have found various resources on the web and from them uncovered the setserial utility. What I need from somebody is guidance on how to use this utility to

I have a Dell PE 2850 connected via 940-0024C cable to serial port on the UPS mentioned above. I've used apt-get to install nut-2.0.2-3 and attempted to configure based on the documentation. So far I'm getting the following when I try to start ups daemon: server:/etc/ups # /etc/init.d/ups start Starting service NUT: -> Starting UPS driver: Network UPS Tools - UPS driver controller

On Sun, Sep 28, 2014 at 6:48 PM, Richard W.M. Jones <rjones@redhat.com> wrote: > On Sun, Sep 28, 2014 at 06:33:53PM +0800, Zhi Yong Wu wrote: >> On Sun, Sep 28, 2014 at 6:26 PM, Richard W.M. Jones <rjones@redhat.com> wrote: >> > Which version of libguestfs is this? I think you'll have no hope of >> #rpm -qa | grep libguestfs >> libguestfs-1.20.8-1

Hi people. I'm trying to config a: MGE ELISE PREMIUM 1200 NT 02 Serial Nr. 92HE04008 With its serial cable into /dev/ttyS0. I had configured ups.conf, with no luck. Here is my ups.conf: [upscura] driver = mge-shut port = /dev/ttyS0 desc = "UPS" The permissions into /dev/ttyS?: crw------- 1 nut nut 4, 64 mar 8 18:43 /dev/ttyS0 crw------- 1 nut nut 4, 65 mar 8 18:42