similar to: NUT and POWERCOM SMART KING

Hi list here is the patch to make fentonups recognize some PowerCOM's UPS's, and to setup terminal lines for them (at least for SMK-1500a) as powercom's original upsmon do. fentonups -x powercom works correctly with SMK-1500a (it screamed ''Communications with UPS lost - check cabling' or 'Short read during UPS id sequence' without this patch). Sorry for

Hi! I've tried the Fenton Driver for my UPS. The Powercom driver doesn't work. Here is the results: Network UPS Tools - UPS driver controller 2.0.0 Network UPS Tools - Fenton UPS driver 1.21 (2.0.0) Unknown ups - please report this ID string: #PCM SMK-1000 2001 V9.0 Detected Unknown MK-1000 on /dev/ttyS0 Have you any ideas to make it compartible with NUT. Thanks! With

Hi ups-devel, As I looked throw www.networkupstools.org site, haven't found any pointers where to send patches, so I hope this is the right place. (Please let me know weather this is the right place.) The patch contains a minor change in the logic of the driver, our Effekta MHD 3000 UPS continuously writes status data to the serial port, so one has to send a CR character and empty the

Hi *Simon, i got a similar setup here (also a powercom-oem-product, but in my case labeled by a swiss "manufacturer") with the same problems, using powercom's upsmon works fine, while nut completely refuses to cooperate. after trying almost everything i somehow hopeless surfed on the official nut-page, when i saw that there are powercom-products which don't need the

Hi. Sorry for the English. Use online translator. Trying to configure Powercom Smart KING Pro 1250A and Debian Jessie. OS name and version: Debian Jessie 8.8, kernel 4.9.25-1~bpo8+1 exact NUT version: 2.7.2-4 NUT installation method: package exact device name and related information: Powercom Smart KING Pro 1250A (connect via usb; leads changed) complete problem description, with any relevant

Hi. Sorry for the English. Use online translator. Trying to configure Powercom Smart KING Pro 1250A and Debian Jessie. OS name and version: Debian Jessie 8.8, kernel 4.9.25-1~bpo8+1 exact NUT version: 2.7.2-4 NUT installation method: package exact device name and related information: Powercom Smart KING Pro 1250A (connect via usb; leads changed) complete problem description, with any relevant

Hi again, I tested several times using the Megatec driver from nut 2.2.2 to no avail, as it definitely never "sees" the UPS. Always getting : # drivers/megatec -DDD -a Alpha Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec] Carlos Rodrigues (c) 2003-2008 debug level is '3' Starting UPS detection process... Asking for UPS status [Q1]... Q1 => FAILED

Hey all, I've tried some very base configs with the powercom 2200, but I can't seem to get it to work. Has anyone dealt with these UPSes before, or know if they use the standard powercom drivers? I'd be more than happy to allow access to my test system so someone more knowledgeable can take a look (and am also willing to pay something for the solution of said problem.) -Dan

G'day. I have a UPS here that is driven by the Fenton UPS driver, and which requests that I report the ID string to the NUT developers: root@anu:~# upsdrvctl start smk800 Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - Fenton UPS driver 1.22 (2.0.4) Unknown ups - please report this ID string: #M+H SMK-800 2000 V6.2 Detected Unknown MK-800 on /dev/ttyS0 The

Hi I purchased an Ultra 1000VA UPS (http://www.ultraproducts.com/product_details.php?cPath=35&pPath=154&productID=154) I am trying to use nut with it (I am using gentoo linux) but can't find the proper driver. The numbers on the back suggest it might be similar to Black Knight Pro BNT-1000AP from Powercom (http://www.powercom-usa.com/ProductDetail.asp?ID=8974). So I tried the powercom

Carlos, Today I was browsing through the NUT Tracker and noticed an entry which linked to a message on nut-upsdev: http://lists.alioth.debian.org/pipermail/nut-upsdev/2006-January/000559.html Although the fentonups driver is no longer in the tree (since it was replaced by the megatec driver), I think there is still some merit in this patch. Notice the following lines from this message: >

Hi, folks! Which driver should be used for PowerMan 2000 Real Smart? Backpro 1000 Plus is successfully monitored by genericups/upstype=4, but this's not working for RealSmart2000. Somebody wrote in blogs at http://k001.livejournal.com/270848.html that RealSmart can be monitored using "fentonups" driver but this is false on my box. WBR, Ilya

Hi there, A couple years ago, I had patched the "fentonups" nut driver to allow it to work with my Unitek Alpha 500 UPS. My patch had been accepted and incorporated in the standard fentonups driver. I have had no time to stay involved in the "nut" project since (and besides this I'm not a developper...). 2 days ago I upgraded from Ubuntu Gutsy to Ubuntu Hardy and got

Hi Patrick, 2006/4/2, Patrick Beard <p.beard@blueyonder.co.uk>: > Hi Arnaud, > > Just wanted to let you know the the Belkin F6H500ukUNV is working for me > with the fentonups driver. > > http://catalog.belkin.com/IWCatSectionView.process?IWAction=Load&Merchant_Id=&Section_Id=202840 > > I originally tried it with the genericups driver with upstype=7 but this

Hi Henning, you should get in touch with Carlos, who his developing a generic megatec driver (available from svn: http://eu1.networkupstools.org/source.html) Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer -

Hi Alexander, > I've UPS named PowerMan RealSmart 1000, it is not listed in > compatibility list. I found that it works with "fentonups" driver and > have ups.model "Unknown S163-1000". Ithink "1000" is from capacity - > I've seen in Internet someone have RealSmart 800 identified "S163-800". > Also PowerMan have

Hi I'm hoping someone can help. I'm running fc5 with nut 2.0.3. I just recently acquired 2 Gamatronic SmartCompact ups for my Linux boxes. As you can see from the info below, everything looks ok. When I unplug the ups from the wall, after a while, the computer shutdowns very rudely. That it is just turns off. No scrolling down of processes shutting down It does not seem shutdown

Hello, I'm new there. I bought an UPS Powercom BNT-600AP. It's compatible in NUT with driver powercom and protocol type KIN1500AP. But I have a simple problem: the 'upsc' shows wrong values in battery.charge (maybe in other rows also /ups.load, voltages?/) - if battery is 100% charged it shows only 92.6% or 93.0%. I thing I have wrong values in driver parameters: batteryPercentage,

Hi, 2010/12/27 ??? <pointbre at naver.com> > First of all, thanks for your effort to NUT Project, > I'm developing remote monitoring solution for many devices based on linux > server. > In field test, we reached the power shutdown problem which may cause the > crack of linux file system. > I search the solution and find NUT project and i'm very glad that NUT >

--Boundary-00=_P640Cns8vokfwHW Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi, attached patch fixes the build of the nut RPMs. I also removed a double file entry for /etc/sysconfig/ups. Please CC: comments. Best regards, Thomas Jarosch --Boundary-00=_P640Cns8vokfwHW Content-Type: text/x-diff;