similar to: Master privileges unavailable

hi i bought a ultra ULT31502 ups someone seem able to run this ups with nut just see Dean thread on: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=770423&Tab=11&NoMapp=0 i use suse 10.1, i installed nut the ups is connected directely to my computer with an usb cable lsusb return Bus 001 Device 004: ID 0d9f:0001 Powercom Co., Ltd with lsmod, i can see

Hello all, I'm having problems with what I'm told should be a straightforward issue. The message in /var/log/daemon is: <quote> Feb 13 10:37:57 lupin upsmon[31324]: Master privileges unavailable on UPS [lupin1500AVR@localhost]

Hi, I'm using dovecot on debian etch: ||/ Name Version ii dovecot-common 1.0.rc15-2etch1 ii dovecot-imapd 1.0.rc15-2etch1 ii dovecot-pop3d 1.0.rc15-2etch1 # dovecot --version 1.0.rc15 Now here is my question. Some of the mail users may only login from the LAN, while others can login from the LAN and the internet. I've read about

Hi all, I've just upgraded my debian box from etch to lenny, and am now having Nut problems. I have read through the UPGRADING text (which helped fixed my first ups driver related problem), but have now hit another problem, which seems quite common, but non of the responses I've found on Google apply, so I'm coming to you for help. On issuing a "/etc/init.d/nut start"

Hallo group, I am running openSUSE 10.3 with nut-2.2.0-20 installed. I have configured it as mentioned in /usr/share/doc/packages/nut/README.SUSE. on starting nut using "rcupsd start" i get following: # Starting NUT UPS monitor done Broadcast Message from root at pane (somewhere) at 22:27 ... Communications with UPS myups at localhost

Hi, When using dovecot for authentication of an SASL (postfix) request, i cannot use the allow_nets parameter. The IP-address of the requester is not known in dovecot. I would like to allow sasl for certain users, others are not allowed to access via SASL. Some users can have access to imap and pop3 from certain IP-addresses. How could i combine this in then dovecot configuration? -- Best

Hi, I have been running nut successfully for a long time with my Debian 11 server. I upgraded my server to Debian 12 today, which upgraded nut also from 2.7.4-13 to 2.8.0-7. I noticed that after upgrade there was a upssched process running and taking 100% cpu time. I checked if there were any changes to configuration file formats with nut upgrade and only differences I noticed were a terminology

Hello! After I type "upsmon", in syslog the following message appears: Aug 16 14:11:09 marto upsmon[7731]: Master privileges unavailable on UPS [Inform@localhost] Aug 16 14:11:09 marto upsmon[7731]: Reason: Access denied Can you tell me where my error is, my configuration files are: ups.conf: [Inform] driver = powercom port = /dev/ttyS0 desc = "inform guard" linevoltage = 220

Hello All, I'm trying to establish a MASTER SLAVE configuration of UPS using NUT Driver. I'm able to shutdown the master after UPS is on BATTERY ( POWER BLACKOUT) .However I'm trying to shutdown the other SLAVE MACHINES BEFORE MASTER. But at the remote side ( Slaves ) shutdown after UPS blackout does not happen. My configuration in Master are /usr/etc/upsd.users

Hello. So as my english is not so good, i'll try to write my story in bash commands :o) miwa@zork3$ uname -mrs FreeBSD 5.5-STABLE i386 miwa@zork3$ su root@zork3# cd /usr/ports/sysutils/nat root@zork3# make && make install root@zork3# cd ../nut-usb root@zork3# make && make install root@zork3# cd /usr/local/etc/nut root@zork3# cat ups.conf user=root [MGE-Ellipse]

Hello, I'm facing problems as I'm installing NUT to monitor a MGE Ellipse ASR600USBS on a FreeBSD 6.1 box. UPS is recognized as : ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 I'm temporarily using root profile (devfs/devd scripts not modified atm). newhidups starts & runs fine (unplugging mains makes newhidups outputs lots of data when started with -DDDD flags)

P.S.2 Today I experienced something weird. As I was working, the system started a shutdown and did shut down, then the UPS got powered off and then back on - an expected behavior for a power fail situation. However there was no power failure! I ran nut-journal to check what happened: Previous complete boot through shutdown Oct 29 10:09:33 i7 upsdrvctl[1966]: Using subdriver: MGE HID

hello, at first I'm sorry my english isn't perfect but I tried to be clear I work with mandriva 2007 and with nut 2.0.1 installed with urpmi my UPS is a MGE Evolution 2200 connected with RS232 in my ups.conf I try to use mge-utalk driver and also mge-shut both seem to work I don't really known which I add to use It's the first point. As I saw on web site, I add maxage 25 in

Here are the results from the output of upsc under different conditions from my Debian Test system with NUT 2.7.2 : Normal: ups.status: OL No wall power: ups.status: OB Runtime calibration (started from AP9630 web interface): ups.status: OB CAL So at this stage there is a difference! I then connected to my QNAP and set the UPS settings on the web interface to "Shutdown server if power

Hello, I encounter a problem using the UPS MGE Evolution 850 VA USB with Debian Etch and the nut package available for this version. I got this error: ==syslog== Can't connect to UPS [MGE850VA] (usbhid-ups-auto): No such file or directory upsd[2767]: Startup successful upsmon[2769]: Startup successful upsd[2767]: Connection from 127.0.0.1 upsd[2767]: Client MGE at 127.0.0.1 logged

Hello everybody, I have an Infosec's UPS and would like to shutdown my computer when he's on battery. My Infosec's UPS is not in the list of supported UPS but the driver is the same than megatec's driver (This is the same factory with some differences...) So, here are my configurations : -- Ubuntu Desktop -- apt-get install nut OK UPS connected to ubuntu via USB cable After

those mails list are from last century but i give it a try ! created : https://github.com/networkupstools/nut/issues/563 Hello all, Trying to run an EATON 850pro via USB on a Debian Stretch Stable. I have letsencrypt certificate installed and working. When trying to manage the EATON device, i got: upsmon Can not initialize SSL context When 850pro is connected via USB, i can: lsusb Bus 009

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

Greetings! I have successfully installed and configured nut package. All i want now is to power off ups. If i run upsmon -c fsd as root - everything goes fine, system and ups gracefully shutting down. If i unplug power cable from an ups, then system is down, but ups still on load. Any help would be appreciated. Debian Lenny x86 ups.conf [ippon] driver = megatec port = /dev/ttyS0

If there is a next Windows release, perhaps the default NOTIFYFLAG's should be adjusted? NOTIFYFLAG ONLINE SYSLOG NOTIFYFLAG ONBATT SYSLOG NOTIFYFLAG LOWBATT SYSLOG NOTIFYFLAG FSD SYSLOG NOTIFYFLAG COMMOK SYSLOG NOTIFYFLAG COMMBAD SYSLOG NOTIFYFLAG SHUTDOWN SYSLOG NOTIFYFLAG REPLBATT SYSLOG NOTIFYFLAG NOCOMM SYSLOG NOTIFYFLAG NOPARENT SYSLOG The 'wall'