similar to: Xserve, USB, NUT

I am forwarding the below message. Does anybody on this list know anything about this problem? Petr - perhaps you should switch from the "hidups" to the "newhidups" driver. I believe it supported the APC Back UPS even in NUT 2.0.2, and it certainly does so in the Development version that you can get from CVS (see the NUT download page). Also, could you post the output of

I Seem to have made some progress in getting nut-2.0.5 installed, but hidups still has a version number of 0.13. First is hidups 0.13 the correct version? if not how do I find the correct version. Second if my Geek Squad GS1285U UPS is not supported how do I proceed. I have been a programmer for 35 years(mostly high level computer aided design), written code in 20 some languages, am retired

Hi All I'm trying to get my Ultra UPS connected. It connects using a standard USB cable I have --with-drivers=hidups in the configure command and I have lsusb showing Bus 001 Device 002: ID 0d9f:0001 Powercom Co., Ltd Bus 001 Device 001: ID 0000:0000 I have /dev/usb/hiddev0 now matter what I try I keep getting upsdrvctl start Network UPS Tools - UPS driver controller 2.0.3 Can't

I'd like to submit a patch to the 'hidups' driver. I'm a bit new to open-source development model, so I hope I'm not committing a faux paus by just posting it here. I did verify that the problem still exists (by source code inspection) in the latest dev snapshot, which is nut-2.0.3-pre2. I'm using nut-2.0.2 myself. The problem is when I'm connecting to my APC

Hi! I've got a Mandrake 2006.0 machine and a APC Back-UPS Pro 500/1000/1500 (from lsusb). The Mandrake package version of nut is 2.0.1 and hidups actually detects the UPS, however I get loads of these: Sep 12 18:26:11 vader hidups[7658]: Ignoring x86 page event 0xff860080 (0) Sep 12 18:26:11 vader hidups[7658]: Unhandled event: 0x840058 (6) Sep 12 18:26:11 vader hidups[7658]: Unhandled

[I'm switching my dev address to @gmail.com instead of @mgeups... please, update your bookmark] Peter Selinger wrote: > > Arnaud Quette wrote: > > > > Here is the status of PSE (Peter Selinger) NUT patches > > for newhidups (hidparser, apc support, ...). > > > > - nut-cvs-patch-REOPEN-2005-08-24: > > approved and applied on Development tree > >

Hi, I'm new to nut, just installed it. I configured it using the hidups driver to work with my APC BackUPS: # upsc apc350@localhost battery.charge: 100 battery.runtime: 885 battery.voltage: 13.5 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.delay.shutdown: -1 ups.delay.start: 0 ups.load: 660 ups.mfr: American Power Conversion ups.model: Back-UPS CS 350

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

is there a way to override the productid (like -x productid=1234) when using newhidups? just thought i'd try it with the F6C1500-TW-RK over usb. i was able to get hidups to work using the below settings, but it provides limited information. my ups.conf entry: [belkin] driver = hidups port = /dev/usb/hiddev0 and the output of upsc: gateway:/etc/nut# upsc

2006/1/13, Paul Mogren <fkamogee@yahoo.com>: > > This thread is FYI. I don't need any help here. > no, but some details for those who will read it, maybe ;-) I have SUSE 10.0 and an MGE Ellipse. I installed the NUT package from MGE. > > 1) The generated ups.conf pointed to a bad location: > /dev//dev/input/event0 > who generated that ? it seems like an old hiddev

I just installed NUT and my UPS is an APC Back-UPS ES 500. I looked in the list of drivers and found APC Back-UPS ES 350 listed in "drivers.txt" -- that list said I should use either the newhidups or hidups driver. I looked in the installation and I found headers and c files to create these drivers (I think), but in /usr/local/ups/bin there is no driver named, "newhidups or

Hello, I have been trying to get a TrippLite Internet Office 750 UPS to talk to my Linux PBX for a couple of evenings now and I'm getting nowhere... I tried searching the list archives before posting here (I'm sure I'm not the first one to try to get this going) but they seem to be offline... The UPS is unfortunately USB based but I thought I'd give it a try anyway. Here is

Regards I am installing NUT for the UPS Skate UPS-2200D, the UPS have conection with USB to PC and i have problems to configure nut the ups is conected and Linux report this config Aug 19 23:34:56 dakota kernel: [22393.099595] usb 2-2: new low speed USB device using uhci_hcd and address 7 Aug 19 23:35:06 dakota kernel: [22403.186326] usb 2-2: Product: MEC0002 Aug 19 23:35:06 dakota kernel:

I have gone ahead and merged the regex_branch with the main Development branch. Reason: recent renaming of files and moving around of code leads to conflicts between the branches that will be increasingly difficult to resolve. It is easier to merge now while the two branches are still relatively similar and most edits non-overlapping. The merge is between tags before_PSE_6 and after_PSE_6 on

Hello Linas, > Just wanted to inform You (for the compatibility list), that HP R/T2200 works perfectly with the hidups driver. Thank You very much for NUT! :) > > # upsc hp at localhost > battery.charge: 100 > battery.chemistry: PbAC > battery.voltage: 22.7 > driver.name: hidups > driver.parameter.port: /dev/usb/hiddev0 > driver.version: 2.0.5 > ups.delay.shutdown:

Hello everyone, Charles suggested (about a week ago) that I repost to this list. I took a moment to run some additional tests ... The basics: -- UPS: Liebert PowerSure PSA 500 (from the 230 VAC / 50 Hz line) -- Kernel: 2.6.11.5 (from sources), USB support (down to and including CONFIG_USB_HIDDEV) compiled in statically (not as a module) -- Rest of OS: Basically still from the original SuSE

i just purchased a tripp lite OMNIVS1500XL and have been attempting to get it working with the usb drivers since it doesn't have a serial port. it hasn't been anywhere near successful and i was hoping someone might be able to point me in the right direction. i run gentoo and this is what i currenlty have installed: nut 2.0.2 libusb 0.1.10a (gentoo modified) usbutils 0.11-r5

Hello everybody, After succeeded in "tuning" nut-2.0.0's hidups and 2.0.3's newhidups on customized Linux kernels, we are now facing a new challenge : trying to install nut-2.0.5 on a RedHat ES4 which is based on a 2.6.9 kernel. I picked up the 2.0.5 source package and follow the INSTALL doc until step 6. So far so good. RH ES4 is managed by udev, therefore I presume we

Hello all, Has anyone had any luck getting a CPS GS 1500U working with NUT via USB. Its branded Geek Squad (don't ask) but it shows up in the USB device list as the CPS 1500U. I'm running Kubuntu Dapper with all current updates installed, Kernel 2.6.15-26-686, NUT 2.0.3. I've tried hidups and newhidups. With hidups I used port=/dev/bus/usb/001/004 which I'm sure is the UPS