similar to: Problems starting upsd with newhidups

Hello, Upon upgrading to the Debian package of NUT 2.2.0 my APC Back-UPS Pro is no longer recognized. Here is the output if I try to run the driver manually: ----------- # /lib/nut/usbhid-ups -DDD -x vendorid=051d -x productid=0002 -a foxstarups Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-) debug level is '3' No appropriate HID device found No matching HID

Okay, now that I've got NUT up and running with the newhidups driver, I can give it a quick shakedown. Most of the values look good, but are few are off. Here's what I get: elrond@foxstar:~$ upsc foxstarups@localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 3150/08/01 battery.mfr.date: 2005/03/22 battery.runtime: 1935 battery.runtime.low: 120

Hello all, I am trying to leave a video voicemail but am unable to do so. I am using Ekiga (formerly Gnomemeeting) to make a SIP connection to Asterisk 1.2.4. Ekiga supports h261 for video. The call connects and negotiation seems okay. When I leave a message, however, only the audio is recorded. Looking in the log file afterwards I see many messages like this: Mar 21 22:02:34 WARNING[2418]

Bonjour, Je souheterais utilis? la version qui permet le '-x generic',mais je ne sais pas ou la recuperer car ca devrait solutionner mon probleme (cf mail ci-dessous) DaneZ _____ From: DaneZ [mailto:david.guillotte@danez.no-ip.org] To: arnaud.quette@mgeups.com Sent: Sat, 08 Jul 2006 23:24:06 +0200 Subject: Fw: INFOSEC 500 XP en USB _____ Bonjour Arnaud, Je me

Hello, I encountered a problem with my APC Smart-UPS 750, connected via USB, using newhidups. Without any reason, nut/upsmon shut down my PC: >>> Oct 13 12:57:08 echo kernel: usb 2-9.1.1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 161 rq 1 len 8 ret -71 Oct 13 12:57:12 echo upsmon[5060]: UPS smart750@localhost on battery Oct 13 12:57:12 echo upsmon[5060]: UPS smart750@localhost

Hi, When I start upsd under normal conditions, I get this: -------------------------------------------------------------------------------- Network UPS Tools upsd 2.0.4 /etc/nut/upsd.conf is world readable Can't connect to UPS [tripplite] (tripplite_usb-auto): No such file or directory /etc/nut/upsd.users is world readable Synchronizing........ giving up

I'm using an APC Back-UPS XS with nut 2.0.3. I've recompiled/reinstalled the source, and switched over to the newhidups driver (instead of the old hidups driver). I modified by ups.conf to use newhidups. The hotplug files were not automatically installed, I had to copy those from the scripts directory to my hotplug/usb directory. The newhidups driver loads find and then works for a

Hello, I'm facing problems as I'm installing NUT to monitor a MGE Ellipse ASR600USBS on a FreeBSD 6.1 box. UPS is recognized as : ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 I'm temporarily using root profile (devfs/devd scripts not modified atm). newhidups starts & runs fine (unplugging mains makes newhidups outputs lots of data when started with -DDDD flags)

Hello, I try to install my APC Back-UPS RS 800 on my debian system (Etch): Linux aigner 2.6.18-3-686 #1 SMP Mon Dec 4 16:41:14 UTC 2006 i686 GNU/Linux When i try to start the driver an i use hidups i get this failure massage: aigner:/lib/nut# upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: HID UPS driver 0.13 (2.0.4) Warning: This is an experimental driver.

is there a way to override the productid (like -x productid=1234) when using newhidups? just thought i'd try it with the F6C1500-TW-RK over usb. i was able to get hidups to work using the below settings, but it provides limited information. my ups.conf entry: [belkin] driver = hidups port = /dev/usb/hiddev0 and the output of upsc: gateway:/etc/nut# upsc

I got a bunch of configfiles that look like this: mgmt-dev:/etc/nut# grep -v 'niets' * ups.conf:[ups] ups.conf:driver=newhidups ups.conf:port=auto upsd.conf:ACL all 0.0.0.0/0 upsd.conf:ACL localhost 127.0.0.1/32 upsd.conf:ACL remote 192.168.110.0/24 upsd.conf:ACCEPT remote upsd.conf:ACCEPT localhost upsd.conf:REJECT all upsd.users:[monuser] upsd.users:password = mypass upsd.users:allowfrom

In /var/log/syslog Dec 23 13:04:50 ************** upsmon[2010]: Poll UPS [rack1ups at localhost] failed - Write error: Broken pipe After this, there is no longer a upsd daemon running. Error messages follow: Dec 23 13:04:50 ************** upsmon[2010]: Communications with UPS rack1ups at localhost lost ... Dec 23 13:04:55 ************** upsmon[2010]: UPS [rack1ups at localhost]: connect

Hi, I'm trying to get a sweex ups working with nut on debian sarge. This one: http://www.sweex.com/producten.php?lang=1&%20sectie=&item=59&artikel=95 It's shipped with UPSmart and according to the compatibility list it should work with the genericups upstype=7 driver. But it doesn't. I get: mybox:/etc/nut# /etc/init.d/nut start Starting Network UPS Tools: (upsdrvctl

Hi all, (Keeping this in a separate email from my first one so as to not make it horribly complex) I've connected my Belkin F6C120auUNV UPS to my Debian 7.7.0 host via USB, and found that the usbhid-ups driver will not start unless I use the option '-u root', even when starting this driver as root: root at monitor:/lib/nut# cat /etc/nut/ups.conf [greything] driver =

I went to the link to test the power off if the battery gets to low. Here is what I got on the command line. root at odroid-u2:/etc/nut# /usr/local/ups/bin/upsdrvctl -t shutdown -bash: /usr/local/ups/bin/upsdrvctl: No such file or directory root at odroid-u2:/etc/nut# find / -name upsdrvctl /sbin/upsdrvctl ^C root at odroid-u2:/etc/nut# /sbin/upsdrvctl -t shutdown Network UPS Tools - UPS driver

Hi all, i've a problem with only a command in all suite: upsrw. root at ProLiant:/etc/nut# upsrw -u monmaster -p p455w0rd -s ups.delay.shutdown=180 ups Unexpected response from upsd: ERR ACCESS-DENIED root at ProLiant:/etc/nut# upsc and upsmon work greatly. This is in my /etc/host.allow: upsd : localhost, LOCAL, 127.0.0.1, [::1] : ALLOW What miss ? Thank you!

Hi. I have this this on a Odroid-u2 backing it up. Have the USB from the CyberPower SX650G plug in the Odroid-u2 and when I do a lsusb it looks like this: Bus 001 Device 008: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS The User's Manual list SE450G and SX650G. So I guess they would take the same driver. CyberPower web page has a driver but it's for i386 not ARM like

Hi, Self-reply ftw, is it something to do with the permissions of the device that is created when the UPS is plugged in? I remember that Debian does have a pretty strict permissions structure, so do I have to fiddle the permissions of something in /dev? I'll try updating nut-server to version 2.6.4-2.3+deb7u1 in wheezy backports and report back - initial attempt to install from wheezy

2005/9/25, Peter Selinger <selinger@mathstat.dal.ca>: > > Arnaud Quette wrote: > > > > Some more points while you're at it: > > - newhidups will have to be renamed. My aimed was to let the name until > we > > can superceed hidups. Then remove hidups, and rename newhidups to > usbhid-ups > > (name proposition welcomed, but should match the fact

There is a memory leak in newhidups. After 23 days uptime it used 138M memory. Apart from the memory leak, the system works ok. Is there anything I can do to help fix this problem? Tor. [root@tophat init.d]# ps -unut v PID TTY STAT TIME MAJFL TRS DRS RSS %MEM COMMAND 21122 ? Ss 1:35 0 69 137934 136800 27.0 /sbin/newhidups auto 21125 ? Ss 0:37 0