similar to: bcmxcp_usb "Can't open POWERWARE USB device"

Hi everyone, First of all a big thank you for the NUT package, I've been using it for years and couldn't get by without it! I have two Powerware UPS's here, a 9120/1500va and a 5110/700va. The 9120 has used a hacked bcmxcp driver (serial) from the 2.0.2 nut version for about a year now (which I'll explain more about in a seperate email to the dev list), and the 5110 which I just

Hi, I'm trying to get a Powerware 3105 UPS working on SuSE 10.0. I have compiled nut from the current Subversion repository. This UPS uses the bcmxcp_usb driver. I cannot get the driver to find the ups on the USB bus. The error message I get is:- -------------- bcmxcp_usb -u nut -DDDDD -a pw3105 -------------------- Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) debug level is

I decided to try this to see if it worked better since Powerware decided to build in some oddball USB protocol instead of using a HID UPS profile, but it doesn't seem to work. The USB/serial dongle is recognized by Linux and added as /dev/ttyUSB0, owned by group "dialout", so I had to add the nut user to the dialout group. In the compatibility list, the proper driver for the

2009/8/28 Thomas Zulliger <Thomas.Zulliger at quiksilver.com.au> > Hi Arnaud > Hi Thomas, > I'm experiencing exactly the same problem > > DNS-323 fun_plug Fonz > nut 2.4.1-1.tgz > powerware 3105 > using BCMXCP_usb > > /mnt/HD_a2/packages # lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 002: ID 0592:0002 Powerware Corp. > Bus 001

Hi I'm having a problem with the bcmxcp_usb driver FSD command: everything seems to work apart from: upsmon -c fsd Environment: Ubuntu 7.04, nut 2.0.5-1, nut-usb 2.0.5-1, Powerware 3105 UPS. upsd appears to send the FSD command to the UPS, upsmon then runs my NOTIFYCMD (which halts my PC) but the UPS just doesn't turn off. Here are the /var/log/daemon.log entries: Jul 24 23:13:16

Hi, I recently downgraded my kernel to 2.4 series (2.4.32-rc2). Now I can't get nut running. It was fine with 2.6.14. It say's: --------------------- # ./bcmxcp_usb -uroot AUTO Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) Can't reset POWERWARE USB endpoint Unable to find POWERWARE UPS device on USB bus ... --------------------- I've straced it in nut_usb.c

Hello... I have a PowerWare 9120 attached via USB to my Debian system. My ups.conf looks like this: [ups1] driver = bcmxcp_usb port = auto desc = "PowerWare 9120" When testing the driver with "upsdrvctl -u root start" I get: Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) Communications with UPS

Hi, I'm trying to get a Powerware 5115 to communicate with the NUT via USB under Debian Linux and need help. Here is the output that I see. co-nh5:/tmp/mnt/projects/pwusb/nut-2.4.1# /usr/local/ups/bin/upsdrvctl -u root start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 Communications with UPS lost:

On 13/02/14 12:16, Charles Lepple wrote: > On Feb 12, 2014, at 7:50 PM, Tim Dawson wrote: > >> Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. I ran the new driver (see below) and with -DDDD it throws out

Hello, ppl! I try configure NUT for communicate with my Powerware 5115 UPS. As root I run '/lib/nut/bcmxcp_usb -DDDD -u root -a ups', but driver can't connect to my UPS. Some output: Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) debug level is '4' usb_set_debug: Setting debugging level to 3 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001

I have an FC5 system with a powerware 5110 usb ups. The system seems to find the UPS ------------------------------ [root@b1 src]# lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 0592:0002 Powerware Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 ------------------------------- [root@b1

I've got some strange problem with NUT on my 5115 on Debian Etch: ---snip--- $ sudo ./bcmxcp_usb -DDDDDDD -a 5115 Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181) Warning: This is an experimental driver. Some features may not function correctly. debug level is '7' Can't set POWERWARE USB configuration Unable to find POWERWARE UPS device on USB bus Things to try: -

Hi all, I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and configured nut appropriately. The cgi scripts are working fine, but on upsstats.cgi, the Batter, UPS Temp and Battery Runtime fields are all blank - and there are no entries for these values in the 'All data' tree. I've checked the man page for bcmxcp_usb

Hi everyone, Been searching like crazy to find an answer to this. I have even read some of the source code but cannot figure this one out. I have installed nut 2.4.1 on my QNAP 409 Pro. (command: ipkg install nut) I have configured the ups.conf, upsd.conf and upsd.users. When i run "upsdrvctl start" I get the following error messages and output.

Hi Greg, Thomas and the list, I've not forgotten you nor your issue. It just took some time to gather a "faulty" unit and a bit of time to reproduce your issue. The good news is that I've commited a fix to the NUT development branch (aka Subversion), in the release r2015. The bad news is that your test and feedback is welcome ;-) For more info on getting and compiling the

Hi all, I've got a Powerware 5110 UPS that I'm trying to set up with nut in Ubuntu. I've installed nut and configured the first two files: $ cat /etc/nut/nut.conf MODE=standalone $ cat /etc/nut/ups.conf [pw5110] driver = bcmxcp_usb port = auto # port = /dev/bus/usb/002/002 When I try to test this configuration with the following command: $ sudo upsdrvctl start pw5110 Network UPS

Hi Arnaud, Any luck with the latest subversion trunk? From: Greg Sent: Wednesday, May 13, 2009 10:34 PM To: Greg ; Arnaud Quette Cc: Kjell Claesson ; nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Nut and PowerWare 5115 Hi Arnaud, Some more testing on Ubuntu 9.04. Here is the output of bcmxcp_usb and lsusb ============================================ root at

Hi Georg, > one question with regard to a Powerware 5115 UPS connected to a Debian 3.1 > Sarge box via USB: I downloaded and compiled nut 2.0.2 but I am unable to > configure the USB subsystem so that upsdrvctl recognizes the UPS. > > My /usr/local/ups/etc/ups.conf contains: > > [bla] > driver = bcmxcp > port = /dev/usbdev2.2 > desc = "bla bla

Hi. I'm looking for a way to configure an Eaton Powerware 5125 under Debian Squeeze (amd64) with USB port. Can someone help me? Find attached bellow my settings: # cat /etc/nut/ups.conf ... [ups01] driver = bcmxcp_usb port = /dev/bus/usb/002/003 desc = "Powerware 5125" # ls -la /dev/bus/usb/002/003 crw-rw-r-- 1 root nut 189, 130 Nov 21 11:45 /dev/bus/usb/002/003 #

Hi, Does anyone know how to make NUT works with Powerware 5125? I already tried serial communication (genericups and bcmxcp) and USB (usbhid-ups and bcmxcp_usb), but without success. I'm using the latest version of NUT (2.6.5) under Debian amd64. Can anyone help me? Thanks. Daniel -------------- next part -------------- An HTML attachment was scrubbed... URL: