similar to: New UPS protocol choice - Dynamix

Hi, Has anyone had success with the Dynamix 650VA, that uses the USB cable? I can't get megatec_usb to recognize it, I have tried both stable and development versions. Regards Glen Ogilvie

I have a Gamatronic Smart Compact 750. I have it connected to my linux machine via serial cable and am running nut 2.0.3. There is no interruption in power, but the ups is reporting OB (on battery). Is there a configuration option I am missing? The relevant ups.conf entry is: [Gamatronic] port = /dev/ttyS1 desc = "Home Gamatronic UPS" driver = genericups

Hi Volker Kuhlmann and Richard Nelson, As both of you are interested in where I got up to with getting my Dynamix 1000 VA UPS working with Linux, here is the details. It works.. But not too well, as the driver still seems to need some work, and is not in the main nut source as far as I know. It also seems to sometimes not respond when it should. The manufacture has uses the same format as

Like Glen Ogilvie, I got a newer Dynamix 650 VA with USB connection, and was having trouble getting NUT to communicate with it. This appears to be the UPS that megatec_usb was built for - Vendor: 0x0001, Product: 0x0000, uses Megatec's software, has USB chip attached to internal serial lines, and has terrible USB implementation with fake HID tables. But megatec_usb would consistently fail.

Hi James, I'm referring to your post here: http://lists.alioth.debian.org/pipermail/nut-upsuser/2010-September/006201.html Have you got by chance any more info on the Dyamix 1000VA model? I was foolish to buy the USB version because it had a better display on the front. Is there any way to get this to go? I have tried all the USB drivers in NUT (on pfsense 2.0RC1) and none do anything

Hey all, Just a heads up that the ZenTest-3.9.0 release is not compatible with RSpec-1.1.2. I thought I had a release ready to go, but differences between a preview release of ZenTest that I received and the actual release seem to have broken compatibility. We''ll get this resolved soon, but in the mean time please hold off on upgrading to ZenTest-3.9.0 if you''re using RSpec.

Hi, In a routed network setup , is it possible to use ProxyARP given the condition that the shorewall external interface and the DMZ interface are in a completely different network . That means the gateway of the External interface and the hosts in ProxyARPed DMZ zones are in different network. eth0 ---in 220.227.X.Y/30 -- shorewall external interface eth1 ---in 220.227.A.B/27 -- shorewall

Hi, a Javascript in one of my Rails templates needs to load a static XML file. I tried several places to put the actual XML file, and I also tried to make the file a rails template (tried both .rhtml and .rxml) and access it via a controller action. None of these ways worked. Does the lighttpd server know how to serve XML files, or do I need to configure it first? Or, is there a good workaround?

Hi, I have a Fenton Powerpal L660, when I try and configure nut with either the metatec or fentonups driver, and start upsd, the UPS instantly turns itself off. It used to work, until I changed my motherboard and CPU, which means it has a different bios and serial port setup. This is happening with Nut 2.0.1 and also Nut 2.0.5. I have an AMD64 bit processor, Mandriva 2007 64 bit. Any

Hi there Would anybody happen to know the correct driver for a Fenton Powerpal S series? upsdrvctl reports: Network UPS Tools - UPS driver controller 1.2.2 Network UPS Tools - Fenton UPS driver 0.90 (1.2.2) Unknown ups - please report this ID string: #FENTON S Series V4.04EG503 Detected Unknown Series on /dev/ttyS0 Alternatively, does anyone know if the manufacturer is likely to

It seems to me that the RSpec bundle''s ''it'' snippet is in need of some love. By default, a newly inserted spec passes. This seems odd as it is misleading. It also makes it harder find what specs still need to be completed if you return to an RSpec module after a break. I propose that the ''it'' snippet is changed to the following: it

Network UPS Tools version 2.6.3 has been released: http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.6/nut-2.6.3.tar.gz - News: http://www.networkupstools.org/source/2.6/new-2.6.3.txt - ChangeLog: http://www.networkupstools.org/source/2.6/ChangeLog Arnaud and the NUT team -------------- next part -------------- An HTML attachment was scrubbed...

2007/2/19, Glen Ogilvie <nelg@linuxsolutions.co.nz>: > Hi, > > I have a Fenton Powerpal L660, when I try and configure nut with either the > metatec or fentonups driver, and start upsd, the UPS instantly turns itself > off. > > It used to work, until I changed my motherboard and CPU, which means it has > a different bios and serial port setup. > > This is

2007/2/19, Glen Ogilvie <nelg@linuxsolutions.co.nz>: > Hi, > > I have a Fenton Powerpal L660, when I try and configure nut with either the > metatec or fentonups driver, and start upsd, the UPS instantly turns itself > off. > > It used to work, until I changed my motherboard and CPU, which means it has > a different bios and serial port setup. > > This is

Hi all... I've tested my installation and everything seems OK, but I'll note a couple of things. System is debian, UPS is Fenton Powerpal 660 L First of all, the ups software did not restart because I had not changed 'no' to 'yes' in /etc/default/nut. Maybe it's a debian thing, I don't know. But I don't remember seeing it noted anywhere in nut docs.

Hi, I've got two Dynamix UPS's, both of which are USB and don't seem to work with NUT yet. Can anyone give me some advise on where I should start with working on getting them working. I can do a little C programming, so happy to give things a go but need some guidance. Brian R. Smith (who also subscribes to this list) has one as well. I've attached the output of lsusb -v and

Hi to all! Path send by Brian R. Smith with subject "[Nut-upsdev] Dynamix 650 VA USB - broken, have rough fix" really works! Tested with no-name UPS (works with UPSilon 2000 Windows software) and has USB vendorid=0001 productid=0000 Please, add it to the main branch of blazer_usb.c I belive that several users agree this.

On Dec 17, 2011, at 3:53 AM, Arnaud Quette wrote: > Author: aquette > Date: Sat Dec 17 08:53:41 2011 > New Revision: 3363 > URL: http://trac.networkupstools.org/projects/nut/changeset/3363 > > Log: > Try to fix language ID support for USB units from LDLC, Dynamix and no names in blazer_usb (reworked patch, from Brian R. Smith and Aur?lien Grenotton) ... > + if

I can''t figure out how to make the updates to allow for the route_form method to return a url that matches the expected. Here is a sample route_for(:controller => :task, :action => :new).should == "/task/new" If a task has to be created for a user, how exactly do I do this. The following doesn''t work: route_for(:controller => :task, :action => :new,

Hi Henning, you should get in touch with Carlos, who his developing a generic megatec driver (available from svn: http://eu1.networkupstools.org/source.html) Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer -