similar to: Problems with MGE ESV 8+ and NUT 2.0.3

Dear Sirs, I have an old but very well-working UPS MGE Pulsar ESV8+ Rack. I'd like to use it to power FreeBSD 9.0-Rel server. Of fortunately I have problem with recommended driver - mge-utalk, nut 2.6.4 (installed from FreeBSD Ports). I get messages: Could not get multiplier table: using raw readings. and updateinfo: Cannot update system status I saw similar thread on mailing list with no

Hi All, I have an mge pulsar esv 14+ rackmount UPS connected via straight through serial cable to a USB to serial adaptor (My motherboard does not have a native RS232 port). I am running Ubuntu Server 9.04 x64, and nut 2.4.1-2ubuntu4 installed via APT. I am getting the error: Poll UPS [ups1 at localhost] failed - Driver not connected My conf files: (ups.conf) [ups1] driver=mge-utalk

Hi, I'm running into an issue while using FreeBSD 5.4, NUT from ports (2.0.3), serial on /dev/cuaa1, Ellipse 1200 USBS. The ups.conf is : [ellipse] driver=mge-utalk port=/dev/cuaa1 desc="Telecom Closet Ellipse" When I go to start it I get : Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.87 (2.0.3)

I'm running nut 2.0.1 with an MGE pulsar evolution 3000 with the mge-utalk (serial) driver on NetBSD 3.1 . I had a very strange occurance in my basement datacenter this early AM. the following was logged by upslog: 20080219 023452 100.0 123.0 049.0 [OL CHRG] NA 60.00 20080219 023522 100.0 122.8 049.0 [OL CHRG] NA 60.00 20080219 023552 098.0 123.0 049.0 [OL DISCHRG] NA 60.00 20080219 023622

Hello, I have a MGE Comet S31. I installed nut for Debian/Sarge and configured the mge-utalk protocol. I get the following syslog messages Sep 28 11:10:41 neckarsulm upsmon[25505]: Poll UPS [comet@mastermind] failed - Variable not supported by UPS Sep 28 11:10:46 neckarsulm mge-utalk[25284]: updateinfo: Cannot update ups.temperature Sep 28 11:10:46 neckarsulm mge-utalk[25284]: updateinfo: Cannot

Ah, the perils of auto-upgrades. Last night, Fedora Core 3 upgraded my perfectly working nut installation to 2.0.2. I was informed of that because every xterm in the house (about 8 over a Linux box, two laptops and a G4 server) started beeping at 3:20am and didn't stop until I shut down nut. Keep in mind this configuration has been working for about two years. Here's the messages I get

On 18.4.2013 ?. 22:24 ?., Arnaud Quette wrote: > > 2013/4/18 Pladi Computers Ltd. <pladi at lovechnet.com > <mailto:pladi at lovechnet.com>> > > UPS: > http://www.eaton.com/Eaton/ESeriesUPS/DXUPS/index.htm?wtredirect=www.eaton.com/DXUPS > > I have the same problem on two different computers. The first one > is running Ubuntu 12.10 i386 , the

Hi! I have a MGE Pulsar ES 8+ UPS. Here is the response of some commands: - Si --> 3000 44 0 - Si 1 --> Pulsar ES8+ 0 - Ai --> 5 0 It's not recognized very well by the current (from CVS) mge-utalk driver: [root@srv01 ~]# /home/rog/src/nut/drivers/mge-utalk -i 20 -DDD -u root /dev/ttyS0 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.86 (2.1.0) debug level is '3'

Credit goes to "cppcheck". Signed-off-by: Thomas Jarosch <thomas.jarosch at intra2net.com> --- drivers/mge-utalk.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/drivers/mge-utalk.c b/drivers/mge-utalk.c index c6114c7..616e2ad 100644 --- a/drivers/mge-utalk.c +++ b/drivers/mge-utalk.c @@ -465,7 +465,8 @@ void upsdrv_shutdown(void) { char

Hello My server with another UPS (MGE Pulsar Evolution2200 USB) is OK. All scripts work Is it possible to work with a UPS MGE CometExtrem 6 on serial port Which driver can I use ? I tried with mge-shut ou mge-utalk without any success when I start driver with upsdrvctl with mge-utalk I have (after a long time) Can't connect to UPS [MGE_cometEX] (mge-utalk-MGE_cometEX): No such

UPS: http://www.eaton.com/Eaton/ESeriesUPS/DXUPS/index.htm?wtredirect=www.eaton.com/DXUPS I have the same problem on two different computers. The first one is running Ubuntu 12.10 i386 , the second one is running Debian 6.0 x64. Both of them are updated. I tried using different serial cable but the result is the same. The connection to the ups using Windows 7 and Winpower is working fine on

Hi everybody, Sorry for the eternity it took to solve the UTalk problems, but I've been busy on so many fronts... I've updated the CVS Testing tree, which will soon become 2.0.3 stable release, with mge-utalk 0.87. This release fixes the UTalk problems you have recently faced. If possible, please test it and report back if it work or not with your unit. To do so: 1) Retrieve the source

Hello list- Anyone with Tripplite SMX1500XLRT2U (http://www.tripplite.com/EN/products/model.cfm?txtModelID=2687) successfully integrated with NUT through serial port? I'm trying to connect to SMX1500XLRT2U using serial cable shipped with UPS under FreeBSD 6.3-STABLE and NUT 2.2.2 installed from ports. Unfortunately, it looks like it couldn't be recognized. %dmesg | grep sio sio0:

Hello, I'm using an MGE Evolution 1500 with a Debian Sarge 2.4.27 smp server. NUT is using the mge-utalk driver. [ups1500] driver = mge-utalk port = /dev/ttyS0 Seens I did a test.battery.start, my UPS goes off (beep!) once per week (same day, same hour). I guess there should be a very easy explanation for this, unfortunatly, I haven't found it yet. I've tried to upgrade

I have an MGE Pulsar Evolution 1100 connected to a Debian box, with nut-2.0.1 (the standard "sarge" packages). I have it connected through USB, and I'm using newhidups. However, about once a day the driver looses contact with the UPS and I have to restart NUT to get it to drop the "data stale" nonsense (it happens more often than this, but most times it recovers without

Hi, FreeBSD 5.4, NUT from ports (2.0.3), serial on /dev/cuaa1, Ellipse 1200 USBS. I set the ups.conf up as : [ellipse] driver=mge-utalk port=/dev/cuaa1 desc="Ellipse" When I go to start it I get : Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.87 (2.0.3) Could not get multiplier table: using raw

Anyone know what is the problem for this? thanks Andrew freebsd 540$ /usr/local/etc/rc.d/nut restart nut not running? (check /var/db/nut/upsd.pid). Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - Generic UPS driver 1.32 (2.0.4) UPS type: APC Back-UPS (940-0023A cable) Unable to open /dev/cuad0: Device busy Current user id: uucp (66) Serial port owner: uucp (66) Serial

Hi Sabine and Christoph, I've just committed a few changes to mge-utalk (r2749). can you please try a snapshot and report back the results: http://new.networkupstools.org/download.html#Snapshots cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Hi, i had purchase a MGE-Ellipse 500 and i'm trying to use the DB9 F / RJ45 cable send by MGE with UPS. Which driver i'm suppose to use: mge-utalk or mge-shut ? When i try mge-utalk i've got this message: # upsdrvctl start Network UPS Tools - UPS driver controller 2.0.0 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.80.3 (2.0.0) Startup timer elapsed, continuing... and there is

On Mar 3, 2017, at 8:21 AM, Charles Lepple <clepple at gmail.com> wrote: > > On Mar 2, 2017, at 3:38 PM, David Baker <david at baker.im> wrote: >> >> I?ve read the documentation, and it would appear that this can be set by the U-Talk protocol (page 34 of http://networkupstools.org/protocols/mge/9261zwfa.pdf) but I can?t seem to figure out how to send the device the