similar to: Powerware 5110, SuSE10.1 & USB

Hi, I'm trying to get a Powerware 3105 UPS working on SuSE 10.0. I have compiled nut from the current Subversion repository. This UPS uses the bcmxcp_usb driver. I cannot get the driver to find the ups on the USB bus. The error message I get is:- -------------- bcmxcp_usb -u nut -DDDDD -a pw3105 -------------------- Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) debug level is

2009/8/28 Thomas Zulliger <Thomas.Zulliger at quiksilver.com.au> > Hi Arnaud > Hi Thomas, > I'm experiencing exactly the same problem > > DNS-323 fun_plug Fonz > nut 2.4.1-1.tgz > powerware 3105 > using BCMXCP_usb > > /mnt/HD_a2/packages # lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 002: ID 0592:0002 Powerware Corp. > Bus 001

I have an FC5 system with a powerware 5110 usb ups. The system seems to find the UPS ------------------------------ [root@b1 src]# lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 0592:0002 Powerware Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 ------------------------------- [root@b1

Hi everyone, First of all a big thank you for the NUT package, I've been using it for years and couldn't get by without it! I have two Powerware UPS's here, a 9120/1500va and a 5110/700va. The 9120 has used a hacked bcmxcp driver (serial) from the 2.0.2 nut version for about a year now (which I'll explain more about in a seperate email to the dev list), and the 5110 which I just

Hi. I'm looking for a way to configure an Eaton Powerware 5125 under Debian Squeeze (amd64) with USB port. Can someone help me? Find attached bellow my settings: # cat /etc/nut/ups.conf ... [ups01] driver = bcmxcp_usb port = /dev/bus/usb/002/003 desc = "Powerware 5125" # ls -la /dev/bus/usb/002/003 crw-rw-r-- 1 root nut 189, 130 Nov 21 11:45 /dev/bus/usb/002/003 #

Hi, I'm having trouble with nut running on feisty. I have a powerware 5110 connected using USB i did an "sudo lsusb -a" before and after i plugged in the powerware usb cable and did a diff on the results of the two which was: -- 322c322 < Port 2: 0000.0100 power --- > Port 2: 0001.0301 C_CONNECT lowspeed power connect -- current ups.conf is: -- [pw5110] driver =

Hi, I have an UPS Powerware 5110 ( usb connection ), on Linux OS is Debian 4.0 The /etc/ups.conf file setting is: [myups] driver = bcmxcp_usb port = auto desc = "UPS Powerware 5110 1500 VA" When the daemon starts it displays the following message: "Starting Network UPS Tools: (upsdrvctl failed)." Looking at /var/log/syslog I found the following line

Hi all, I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and configured nut appropriately. The cgi scripts are working fine, but on upsstats.cgi, the Batter, UPS Temp and Battery Runtime fields are all blank - and there are no entries for these values in the 'All data' tree. I've checked the man page for bcmxcp_usb

On 13/02/14 12:16, Charles Lepple wrote: > On Feb 12, 2014, at 7:50 PM, Tim Dawson wrote: > >> Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. I ran the new driver (see below) and with -DDDD it throws out

Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. - Tim On 02/12/2014 06:46 PM, Greg Vickers wrote: > Hi all, > > I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and > configured nut

The driver will poll the UPS for what variables it supports when it starts, and then go into a polling loop. Look for a section defining the meter map, and you should see the result, as well as the raw data. You can get the comm spec for XCP from the nut site if you want to delve deeper. I'd give more specifics, but am out of town and only working from memory at the moment . . . - Tim On

Hi all, I've got a Powerware 5110 UPS that I'm trying to set up with nut in Ubuntu. I've installed nut and configured the first two files: $ cat /etc/nut/nut.conf MODE=standalone $ cat /etc/nut/ups.conf [pw5110] driver = bcmxcp_usb port = auto # port = /dev/bus/usb/002/002 When I try to test this configuration with the following command: $ sudo upsdrvctl start pw5110 Network UPS

Help please on Powerware 3105 serial (aka SOLA 305 here in Australia). Is it best configured as a contact-closure device or do I try and persist to get bcmxcp to work - which it won't so far? Running on SUSE 10.1 Thanks,

Hi On http://nutwiki.kanonbra.com/wiki/Category:Eaton_Powerware_5110 you can see what is reported. The unreleased part refers to v2.7.1, which is now released. Alf Greg Vickers <daehenoc at iinet.net.au>: >Hi all, > >I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and >configured nut appropriately. The cgi scripts are working fine, but on

Kjell Claesson wrote: > Then i have a problem. My computer is down due to a > faulty mainboard, Youch. I hate it when that heppens. Hope it wasn't because you got a power spike ;-) Let me or Georg know if you want us to run any debug code. Feels like a bcmxcp_usb driver bug to me since the bcmcxp serial driver works fine and all my other USB devices work fine (wifi adapter, memory

Hello All, Sorry for the long post, I'm just trying to give as much info as I have about the problem(s) ... Recently I've tried to port NUT to the hardware router Asus WL-500g Deluxe (http://wiki.openwrt.org/OpenWrtDocs/Hardware/Asus/WL500GD), that runs OpenWRT Linux distribution (http://www.openwrt.org) based on Linux 2.4.30 kernel, in order to support my Powerware 5110 UPS (through USB

> On February 14, 2014 11:22:22 PM CST, Greg Vickers <daehenoc at iinet.net.au> wrote: >> I ran the new driver (see below) and with -DDDD it throws out tons of >> never ending information, what am I looking for? :) > On Feb 15, 2014, at 2:57 AM, Tim Dawson wrote: > The driver will poll the UPS for what variables it supports when it starts, and then go into a polling

Hi, OS: FreeBSD 9.0-RELEASE NUT version: nut-2.6.5_1 (installed from ports) UPS: Eaton powerware 5110 Can you help me with this device, please? [root at mail /usr/local/etc/nut]# /usr/local/libexec/nut/usbhid-ups -DDDD -a eaton Network UPS Tools - Generic HID driver 0.37 (2.6.5) USB communication driver 0.31 0.000000 debug level is '4' 0.001239 upsdrv_initups... 0.001958

On 16/02/14 00:38, Charles Lepple wrote: > On Feb 15, 2014, at 2:57 AM, Tim Dawson wrote: >> The driver will poll the UPS for what variables it supports when it starts, and then go into a polling loop. Look for a section defining the meter map, and you should see the result, as well as the raw data. > Tim: spot on. > > Greg, > > If you want, you can capture the -DDDD output

Hi, I have set up a RaspberryPi computer to do monitoring of two UPSs. One is an MGE evolution 800, one is an Eaton Powerware 5110. The MGE was being monitored by another Linux (Ubuntu 12.04) computer, and I just copied and pasted in the relevant nut config and it works just fine with nut. I've tried to set up the Powerware 5110 with nut, and the bcmxcp_usb driver can't communicate