similar to: BlueWalker Powerwalker VI Line-Interactive UPS

Hello ! first off, thank you all for making this piece of software. from what i have seen so far this seems to be a really mature and advanced tool for all sorts of UPS models ! I`d like to tell that I own a UPS which isn`t listed on the compatibility list, but seems to be compatible. It is a PowerWalker - see this at

Hello ! first off, thank you all for making this piece of software. from what i have seen so far this seems to be a really mature and advanced tool for all sorts of UPS models ! I`d like to tell that I own a UPS which isn`t listed on the compatibility list, but seems to be compatible. It is a PowerWalker - see this at

Hello, I have two UPS from PowerWalker: VFI 1500RM LCD and VFI 3000RM LCD both equiped with SNMP card, but NUT with snmp-ups does not support them. PowerWalker declare support RFC1213, RFC162 but there is a problem with some snmp values: # upsdrvctl start Network UPS Tools - UPS driver controller 2.6.4 Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.4) Detected 3K on host 10.0.0.236

Hi, I am unable to get my UPS working with NUT. Information: lsb_release -a: Distributor ID: Raspbian Description: Raspbian GNU/Linux 8.0 (jessie) Release: 8.0 Codename: jessie apt-cache policy nut-server: nut-server: Installed: 2.7.2-4 Candidate: 2.7.2-4 Version table: *** 2.7.2-4 0 500 http://mirrordirector.raspbian.org/raspbian/ jessie/main armhf Packages

Dear Nut-UPSdev Team, First of all I would like to appreciate the great job you are doing. Your work is very important and helpful for all UPS users. I found that you show compatibility with blazer_ser and blazer_usb for six of our models. Please inform me how we can make it happen that all our models become compatible? Who from your team added the compatibility with PowerWalker VI 850 LCD?

Hi NUT developers! Are there in progress development of NUT driver that supports AIPTEK PowerWalker VI 2000 LCD - Art-No 310064 (http://www.powerwalker.com/line-interactive.html)? Thank you in advance! Regards, Dimitar Angelov

[Please subscribe to the mailing list: http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser ] On Nov 28, 2013, at 4:10 PM, Danijel ?ili wrote: > Since the provided drivers come with absolutely no installation instructions, I turned to NUT. > > The compatibility list says "blazer_usb" should be used for PowerWalker's devices, so that's what I put in my

Since the provided drivers come with absolutely no installation instructions, I turned to NUT. The compatibility list says "blazer_usb" should be used for PowerWalker's devices, so that's what I put in my conf: [pwvi] driver = blazer_usb port = auto desc = "PowerWalker VI 1500 LCD" Since I use Ubuntu Server 13.10 so I installed nut from apt.

Hi. I'm from Russia. I try to use NUT with PowerWalker vi 400 se (usb). I use FreeBSD 7.0 (amd64) and megatec_usb driver. Settingup the NUT with FreeBSD installation procedure (Thierry Thomas, from FreeBSD). PowerWalker connect to the computer by usb cable on port usb0 (uhib0). NUT don't starting, and talk to me that supporting device not found. Please, help me. Thank's! With best

Hi, The UPS is now connected via HID-USB, but seems to randomly disconnect. Sometimes after a few hours, other times days... Any suggestions? -------- Original Message -------- Subject: Re: [Nut-upsuser] Powerwalker VI 2200VA LCD Local Time: October 2, 2016 11:50 PM UTC Time: October 2, 2016 9:50 PM From: hyouko at gmail.com To: Lars de Bruin <lars at larsdebruin.net> nut-upsuser

Hello list, just a quick email to report that the following UPS was supported (mostly) out of the box: Model: PowerWalker VI 850 LCD Driver: blazer_usb upsc Output (please note I have manually populated the high and low voltages): battery.charge: 100 battery.voltage: 13.50 battery.voltage.high: 13.5 battery.voltage.low: 10 battery.voltage.nominal: 12.0 beeper.status: enabled device.type: ups

2006/3/27, devzero@web.de <devzero@web.de>: > ... > ps: > Furthermore, there seems some inconsistency between driver.list and website: > > # Network UPS Tools driver.list > # > # This file is used to build the compat.html on the web server. Any line > # with exactly 4 arguments will be turned into an entry on there. > # Naturally, it is read by parseconf, so the

Was anybody able to read the logs and come up with an error? -------- Original Message -------- Subject: Re: [Nut-upsuser] Powerwalker VI 2200VA LCD Local Time: October 16, 2016 11:47 PM UTC Time: October 16, 2016 9:47 PM From: hyouko at gmail.com To: Lars de Bruin <lars at larsdebruin.net> nut-upsuser <nut-upsuser at lists.alioth.debian.org> 2016-10-10 15:28 GMT+02:00 Lars de

The UPS seems to disconnect totally, i need to physically disconnect the cable to get the UPS connected again. A reboot is not enough. Also tried 2 different cables, the one i use now is shielded + 2 ferrite chokes to limit interference. But i want to use NUT since i dont have enough resources to run X.. -------- Original Message -------- Subject: Re: [Nut-upsuser] Powerwalker VI 2200VA LCD

Hello, I'm having problems when trying to execute an deep battery test. UPS Model: PowerWalker VI 1000. root at HP-Opreon:/# upscmd PowerWalker at localhost test.battery.start.deep Username (root): admin Password: Unexpected response from upsd: ERR ACCESS-DENIED /etc/hosts.allow: <code> # /etc/hosts.allow: list of hosts that are allowed to access the system. # See

Hi, - The device never re-connects to the system, i have to physically remove the USB plug and insert it again for the device to come back. - This does not happen when running the driver from the supplier. (java process) - When i poll every 60s it works for about 3 days, anything lower or higher causes it to disconnect faster - The big log i sent is not the output of the driver? if not how can i

Hello, there's a recent thread about this or very similar model but without much info: http://lists.alioth.debian.org/pipermail/nut-upsdev/2010-October/004968.html I have this UPS and I'm trying to use it with nut-2.4.3 and megatec_usb driver: The ups id iin ups.conf is powewalker. /var/log/messages says: Dec 20 22:22:16 kvm-dom0 upsd[1666]: listening on 127.0.0.1 port 3493 Dec 20

> [powerwalker] > driver = blazer_usb > vendorid = 06da > port = auto > desc = "Powerwalker VI 2200VA LCD" > productid = ffff > bus = "001" The VID/PID combo 06da/ffff is used by some devices supported by the 'usbhid-ups' driver: did you have a chance to try it?

Hello List, i have a "PowerWalker VI 400, VI 600, VI 800" ups, which i bought on ebay since it said it supports Linux. Well, it came with a closed source binary written in Java. :( Has anyone a config file which will fit to my PowerWalker ups/usv? The genericups driver doesnt seem to work. Thanks, Mario -- GMX DSL = Maximale Leistung zum minimalen Preis! 2000 MB nur 2,99, Flatrate

Hi all, can anybody sugggest a proper solution to the problem described here: http://nut-upsuser.alioth.debian.narkive.com/wIMnftV0/installing-nut-for- powerwalker-vi-1500-lcd Righet now I am trying to make it go and running on version: root at raspberrypi:/home/pi/deb# apt-cache policy nut nut: Installed: 2.7.2-4 Candidate: 2.7.2-4 Version table: *** 2.7.2-4 0 500