similar to: Build 2.0.4, usb.h missing.

Hello, I have encountered problems trying to set up nut to work with APC BackUps Pro CS connected over USB to an AMD64 machine running Debian. While apcupsd works fine with that device, whenever I start upsd I get the following messages in syslog: hidups[23159]: Startup successful upsd[23160]: Connected to UPS [apc1]: hidups-hiddev0 upsd[23161]: Startup successful hidups[23159]: Unhandled event:

Hi, I'm new to nut, just installed it. I configured it using the hidups driver to work with my APC BackUPS: # upsc apc350@localhost battery.charge: 100 battery.runtime: 885 battery.voltage: 13.5 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.delay.shutdown: -1 ups.delay.start: 0 ups.load: 660 ups.mfr: American Power Conversion ups.model: Back-UPS CS 350

I Seem to have made some progress in getting nut-2.0.5 installed, but hidups still has a version number of 0.13. First is hidups 0.13 the correct version? if not how do I find the correct version. Second if my Geek Squad GS1285U UPS is not supported how do I proceed. I have been a programmer for 35 years(mostly high level computer aided design), written code in 20 some languages, am retired

Another update! It works. The systems shuts down properly when power is lost. Almost. "upsdrvctl shutdown" disconnects my UPS from the mains. From everything I've read in the documentation this should turn off the output of the UPS, not the input. Am I right here? I'm still having the following problem. Any help is appreciated. >> Also - I get the following every 4

I am having problems building usb on mac os x. First, mac os x doesn't seem to have asm/types.h, just sys/types.h. I can't find hiddev.h on mac os x either. Also, it doesn't have usb.h but instead IOKIT/usb/USB.h. I am using mac os x (10.4), and the latest cvs of nut. Is the new usb support going to work on mac os x? Is anyone working on it? It seems that libusb is available

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

An update - I ran a test by unplugging my UPS and letting it run down. The system shut down as it should. However, the /etc/killpower file was not created, and the UPS did not shut off power as it should from the shutdown scripts. This may be because the command to kill the output of the UPS isn't available, or that by not being able to log in as master prevents this. The permissions on the

[I'm switching my dev address to @gmail.com instead of @mgeups... please, update your bookmark] Peter Selinger wrote: > > Arnaud Quette wrote: > > > > Here is the status of PSE (Peter Selinger) NUT patches > > for newhidups (hidparser, apc support, ...). > > > > - nut-cvs-patch-REOPEN-2005-08-24: > > approved and applied on Development tree > >

Hi All I'm trying to get my Ultra UPS connected. It connects using a standard USB cable I have --with-drivers=hidups in the configure command and I have lsusb showing Bus 001 Device 002: ID 0d9f:0001 Powercom Co., Ltd Bus 001 Device 001: ID 0000:0000 I have /dev/usb/hiddev0 now matter what I try I keep getting upsdrvctl start Network UPS Tools - UPS driver controller 2.0.3 Can't

I'd like to submit a patch to the 'hidups' driver. I'm a bit new to open-source development model, so I hope I'm not committing a faux paus by just posting it here. I did verify that the problem still exists (by source code inspection) in the latest dev snapshot, which is nut-2.0.3-pre2. I'm using nut-2.0.2 myself. The problem is when I'm connecting to my APC

* I committed into CVS the gendb patch that I sent to the mailing list on September 12. Arnaud, I hope you approve of this patch; it is more reliable than the previous method in tracking the correct dependencies. * This, together with some other minor recent changes on the Development branch, is between the "before_PSE_3" and "after_PSE_3" tags. Arnaud: if you

Hello, I have been trying to get a TrippLite Internet Office 750 UPS to talk to my Linux PBX for a couple of evenings now and I'm getting nowhere... I tried searching the list archives before posting here (I'm sure I'm not the first one to try to get this going) but they seem to be offline... The UPS is unfortunately USB based but I thought I'd give it a try anyway. Here is

2005/9/25, Peter Selinger <selinger@mathstat.dal.ca>: > > Arnaud Quette wrote: > > > > Some more points while you're at it: > > - newhidups will have to be renamed. My aimed was to let the name until > we > > can superceed hidups. Then remove hidups, and rename newhidups to > usbhid-ups > > (name proposition welcomed, but should match the fact

[FAQ on USB-connected UPSes] > Remember: this is brand new *experimental* software and is probably > very broken. Do us a favor and report successes or failures to > the mailing lists. No problem ... : UPS: Liebert PowerSure PSA 500 NUT: Version 2.0.2 Kernel: 2.6.11.5, with CONFIG_USB_HID, CONFIG_USB_HIDINPUT, and CONFIG_USB_HIDDEV compiled in (statically)

List, I am having trouble with a previously working rsync server. Version: > # rsync --version > rsync version 2.5.4 protocol version 26 > Copyright (C) 1996-2002 by Andrew Tridgell and others > <http://rsync.samba.org/> > Capabilities: 64-bit files, socketpairs, hard links, symlinks, > batchfiles, IPv6, 64-bit system inums, 64-bit internal inums

Nut shut down a machine last night when there was no power outage. When I came in this morning, the UPS was turned off, but it turned on cleanly and passed its self-test. The battery was at 62% when I first checked it, and it's up to 63% now, about 20 minutes later. The UPS is a Tripp-Lite AVR550U. I'm running nut version 2.0.3. I expect to be told to update to a newer version and to

was: Re: [Nut-upsdev] usbhid-ups.h: hid_info_t structure On 8/2/07, Peter Selinger <selinger at mathstat.dal.ca> wrote: > All this needs to be replaced by a re-designed, cleaned-up data > structure. It's on my to-do list, but nothing on that list will get > done by me anytime soon. As nothing is technically broken, and the > changes are prone to introducing subtle bugs, this

Hello, I encountered a problem when trying to send an email to multiple recipients. === LOG === ... cut ... Jul 3 12:34:57 dhcp90 dovecot: lmtp(24106): Debug: none: root=, index=, control=, inbox= Jul 3 12:34:57 dhcp90 dovecot: lmtp(24106): Connect from local Jul 3 12:34:57 dhcp90 dovecot: lmtp(24106): Debug: Loading modules from directory: /usr/lib64/dovecot Jul 3 12:34:57 dhcp90

Is anyone besides me using gcc 4.*.*? I noticed that NUT generates an enormous amount of warning noise with that compiler, mostly due to implicit casts between signed/unsigned pointer types. Any volunteers to de-noise the code a bit? The easy way is to insert typecasts; the better way is to actually take care about signedness. -- Peter gcc -I../include -O -Wall -Wsign-compare -c -o everups.o