similar to: AW: AW: AW: Belkin F6H650 on USB port

Philipp Leusmann wrote: > > Ok, I tried this and my results seem to bet he same as reported. Then I > think I=B4ll have to stick with the windows-driver at least on my main > machine.=20 > Or is there anything I can help to fix this driver? I don't know why we can't read anything from this device. There are many ways in which one could make a buggy device that works with

Hi, is there a way to use my Belkin F6H650 on the USB port? I already installed usbhid-support, but neither the hidups worked (reports "/dev/usb/hiddev0 is not a UPS") nor genericups with upstype=7 and the hiddev set as device ("ioctl TIOCMSET: Invalid argument") worked. I have installed the debian sarge package of nut 2.0.1 (2.0.1-4) Regards, Philipp

Oh oops, I see you already did. -- Peter selinger wrote: > > You could send it without "submitting" it. That's the advantage of > patches - they can be discussed. There are lots of eyeballs here that > might see what's wrong. Thanks, -- Peter > > Eric S. Raymond wrote: > > > > Peter Selinger <selinger at mathstat.dal.ca>: > > > I

Marc Collin wrote: > > Le mercredi 27 d=E9cembre 2006 00:29, vous avez =E9crit=A0: > > Hi Marc, > > > > the answer to your question is contained in the file INSTALL, > > distributed with NUT, section 6 "Set ownership data and permissions on > > your serial or USB ports that go to your UPS hardware." > > > > Quote: > > > >

Hi I'm sending this to you as it appears that you are the person who looks after and/or supervises the code for NUT's Belkin drivers. I'm using the address you use for the Nut-upsdev mailing list ( selinger at mathstat.dal.ca ). Anyway... I have a Belkin Universal UPS and, having just upgraded my Fedora Core system from 4 to 5 and had to go back through the system RC files

I have checked in a cleaned-up version of patch #302111 (Belkin support) into CVS. See cvs diff -uN -r before_PSE_2 -r after_PSE_2 to check the difference. Here is the CHANGES entry: Tue Sep 13 20:50:14 UTC 2005 / Peter Selinger <selinger@users.sourceforge.net> - newhidups: added Belkin support. Also added some new variables and instant commands (some of these were already used by

2006/1/27, Peter Selinger <selinger@mathstat.dal.ca>: > > ... > battery.mfr.date, which is probably the more accurate interpretation. > > I think the naming should be changed to propose both: - battery.date.mfr: Battery manufacturing date - battery.date.change: Battery change date Any comments? Arnaud -------------- next part -------------- An HTML attachment was scrubbed...

2006/10/2, Peter Selinger <selinger@mathstat.dal.ca>: > Arnaud Quette wrote: > > > > 2006/9/29, Peter Selinger <selinger@mathstat.dal.ca>: > > > > > I don't really understand the purpose of the "Testing" branch. It has > > > not been touched since July, as far as I can see. I also don't > > > understand NUT's release

On 1/13/07, Peter Selinger <selinger@mathstat.dal.ca> wrote: > > The question is when exactly this should be converted to a number. > > Should this be done in upscli_splitname() or in upscli_connect()? The > > latter would require a change in the prototypes of upscli_splitname() > > and upscli_connect(), and an attendant change in all the existing > > clients.

On 10/15/06, Peter Selinger <selinger@mathstat.dal.ca> wrote: > I have converted NUT's build system to Automake/Libtool. Right now, > the new build system is contained in the "automake" branch, at: Wow... this is really nice. Thanks for taking the time to do the conversion. > drivers/Doxyfile - this seems to belong to Charles. Perhaps >

Dean K. Gibson wrote: > > My Belkin UPS 1000 failed about a month ago; all of a sudden it > reported a battery failure. Since the Belkin logs showed this as in > instant transition from 99% to 22%, I assume a circuit board failure, > not a battery failure. Similarly, one Belkin UPS 500 circuit board > failed after I used my 100W amateur radio transmitter (not connected to

Fellows, back for 4 days, the baby and the mother are now at home, and the father is... hem, well not so fresh ;-) For those interested in some pictures: http://benjamin.quette.free.fr/ 2006/11/16, Peter Selinger <selinger@mathstat.dal.ca>: > ... > Arnaud: could you please amend the instructions on the NUT download > website http://www.networkupstools.org/source.html (Development

On 2/10/06, Charles Lepple <clepple@gmail.com> wrote: > On 2/10/06, Peter Selinger <selinger@mathstat.dal.ca> wrote: > > Charles Lepple wrote: > > > > > > > [...] The only thing I had to correct manually is > > > > that a few of my binary files were inaccurately classified as text > > > > files (and thus subject to the \r\n

[moving to upsdev as it's now off topic for upsusers] 2006/8/30, Peter Selinger <selinger@mathstat.dal.ca>: [snip] > > the threaded method would allow, with some sub-drv config, to launch > > the polling thread and/or the interrupt thread. Either feeding the > > core is not important since the core wouldn't care about that. > > I think is may make sense to

I'm happy to have had a quick look at this thread... 2007/5/17, Peter Selinger <selinger at mathstat.dal.ca>: > ... > as you know, I haven't had much time to work on NUT. Now my wife is > expecting our first baby in 1 week, so I don't think I will get back > to it in the foreseeable future. I didn't knew before! what a good news: all my congratulations to you

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi James, thanks for the feedback. The output you get seems generally fine, except for battery.voltage: 0.0 and output.voltage: 164.0; these values are consistent with what Phil DeBoest reported. Upsmon normally executes the shutdown command when you reach the "low battery" threshold, as decided by the UPS and/or driver. It does so by looking at ups.status, not battery.charge. --

2005/9/25, Peter Selinger <selinger@mathstat.dal.ca>: > > Arnaud Quette wrote: > > > > Some more points while you're at it: > > - newhidups will have to be renamed. My aimed was to let the name until > we > > can superceed hidups. Then remove hidups, and rename newhidups to > usbhid-ups > > (name proposition welcomed, but should match the fact

OK Eric, Den Tuesday 22 May 2007 08.56.08 skrev Eric S. Raymond: > Kjell Claesson <kjell.claesson at epost.tidanet.se>: > > Or install the udev rules and replug the ups. > > Did that. Manual startup of the driver now works without -u root, > indicating (I think) that the udev rools are doing their job. This >