similar to: [Fwd: Re: Recommendation for big UPS (was CyberPower PR2200)]

Hello... First let me start by saying how terrific NUT seems to be. I have not gotten it working properly with my own UPS yet due to a driver issue, but all of the features I could dream up are in there. I've worked hard to hack around the OEM software from CyberPower for my PR2200 UPS to get it to remotely shutdown other computers on the network which are powered from that UPS, and they

Hi, guys. I have a new CyberPower PR2200 which I'm trying to control using NUT. It has a serial port and I'm connected serially. I am using the cyberpower driver and before a power failure it seems to mostly be working: jeff@backup:~$ upsc cyberpower@localhost battery.charge: 000 driver.name: cyberpower driver.parameter.port: /dev/ttyS0 driver.version: 2.0.4 driver.version.internal: 1.00

I am having some problems getting NUT to run with my cyberpower avr1200 (brandnew). I have a straight through serial cable, and I am getting this: /usr/local/etc/rc.d/nut.sh start Starting nut. Network UPS Tools - UPS driver controller 2.0.2 Network UPS Tools - CyberPower driver 1.00 (2.0.2) Giving up on hardware detection after 3 tries Unable to get initial hardware info string Driver failed

I am having some problems getting NUT to run with my cyberpower avr1200 (brandnew). I have a straight through serial cable, and I am getting this: /usr/local/etc/rc.d/nut.sh start Starting nut. Network UPS Tools - UPS driver controller 2.0.2 Network UPS Tools - CyberPower driver 1.00 (2.0.2) Giving up on hardware detection after 3 tries Unable to get initial hardware info string Driver failed

Hey guys, :) recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. According to compatibility list, PR2200 should work fine, when using powerpanel driver: http://networkupstools.org/ddl/Cyber_Power_Systems/ http://networkupstools.org/ddl/Cyber_Power_Systems/PR2200.html However, when trying to establish a connection between

[please use reply-all to include the list. thanks!] > On Nov 9, 2017, at 9:19 PM, Christoph Lampl <chris at weeone.de> wrote: > > Hey guys, :) > > recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. > > According to compatibility list, PR2200 should work fine, when using powerpanel driver: >

Hi All, has anybody experience with CyberPower Smart/Sine wave series (especially PR2200SWRM2U) in NUT? I couldn't match model numbers on NUT hardware compatibility list. Thanks Gabor

Can anyone give me insight into upsrw? I have a cyberpower PR2200 UPS (running an experimental version of the powerpanel driver hot off the presses by Arjen (thanks Arjen!!)). When I try to run "upsrw -s xyz=abc" to set any available variable, I get "Set variable failed: Access denied". What user name and password is it looking for here? My upsd.users file has 2 users

i own a CyberPower OR2200LCDRM2U and was wondering if any nut drivers support this ups. none i have tried have worked although usbhid-ups did tell me that the productid=0601 was not supported yet. i see in the compatability list on the nut website that the PR2200 is supported with the powerpanel driver but the OR2200 is not listed. i am interested in what i am doing wrong or if this is a support

Dear Charles, thanks for your quick answer and your information! I didn't know there is a difference in the PR-series between old and new. So thanks for this valuable information! usbconfig dump_device_desc shows: ugen0.2: <CyberPower Systems product 0x0601> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (50mA)

I have the following instruction that returns an array that I'm quite confused about. I can't even read it. Can someone shed some light as to how to reach into this array of hashes (that's what I can see) to get the location lat and lon? res = Geocoder.search(addy1) This is the res: [#<Geocoder::Result::Google:0x007fb46c345e18

Begin forwarded message: > From: James Erickson <jimerickso at gmail.com> > Date: August 10, 2009 2:50:52 PM EDT > To: Charles Lepple <clepple at gmail.com> > Subject: Re: [Nut-upsuser] CyberPower OR2200 > > On Sun, Aug 09, 2009 at 06:38:32PM -0400, Charles Lepple wrote: >> >>> From: James Erickson >>> Date: August 9, 2009 6:17:51 PM EDT

I''m using xen-unstable, and I''ve successfully made a passthrough of an intel storage controller to an HVM domU, binding with pciback. 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05) I can access the array from within Windows by installing Intel Rapide Storage Drivers, and everything works as it should. I only have a

Hi. I am a recently debian user that don't know much about linux, but I work hard :). I was boring about MsWindows and I've decided to change, but I have to work with some Windows programs. Really I have a problem: I must use kaleidagraph in my work,I've seen that this program is available in the Programs database, so I've installed and upgraded my Wine. After that I have

Hi, I am trying to VGA passthrough Intel HD Graphics 4600 IGD with Xen-unstable 4.4 changeset 27214 and Linux kernel 3.10.0 but was not successful. Details are as follows: =============================================================================================== teo-en-ming@intel-core-i5-4430-desktop:~$ sudo xl info [sudo] password for teo-en-ming: host :

Hi, I have an Optimus-enabled laptop with a GTX 1060m. I never got it to fully work with Nouveau even after Pascal support was added. I need to run the kernel with nouveau.runpm=0 to get it to work. Unfortunately without proper power mangement support, my laptop will run out of battery after about 1h30, so I'd love to get Optimus working. What I can see is that when the extra GPU is not in

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-4 Severity: normal Tags: squeeze When the monitor is being restored from power saving mode via DPMS, X will lock up/restart. This only occurs when running Xen hypervisor. Running just 2.6.32-5 -xen-amd64 doesn't produce this effect. Note that both 2.6.32-5-xen-amd64 and 2.6.32-5-xen-amd64 with Xen 4.0.1 are running with nopat (to workaround