similar to: right problem with ups belkin (model who work with

hi i have a belkin ups here some setting chmod 0600 /dev/hiddev0 chown nut:root /dev/hiddev0 linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No matching USB/HID UPS found Driver failed to start (exit status=1) linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl -u root start

Philipp Leusmann wrote: > > Ok, I tried this and my results seem to bet he same as reported. Then I > think I=B4ll have to stick with the windows-driver at least on my main > machine.=20 > Or is there anything I can help to fix this driver? I don't know why we can't read anything from this device. There are many ways in which one could make a buggy device that works with

Oh oops, I see you already did. -- Peter selinger wrote: > > You could send it without "submitting" it. That's the advantage of > patches - they can be discussed. There are lots of eyeballs here that > might see what's wrong. Thanks, -- Peter > > Eric S. Raymond wrote: > > > > Peter Selinger <selinger at mathstat.dal.ca>: > > > I

I think someone tried this recently, although I cannot find the post any more. It may be helpful, but it is not guaranteed that we will find anything. Could you please keep the discussion on the mailing list? Thanks, -- Peter Philipp Leusmann wrote: > > Wouldn't it help to sniff usb-communication with the windows driver? > > Philipp > > > -----Urspr=FCngliche

Hi I'm sending this to you as it appears that you are the person who looks after and/or supervises the code for NUT's Belkin drivers. I'm using the address you use for the Nut-upsdev mailing list ( selinger at mathstat.dal.ca ). Anyway... I have a Belkin Universal UPS and, having just upgraded my Fedora Core system from 4 to 5 and had to go back through the system RC files

I have checked in a cleaned-up version of patch #302111 (Belkin support) into CVS. See cvs diff -uN -r before_PSE_2 -r after_PSE_2 to check the difference. Here is the CHANGES entry: Tue Sep 13 20:50:14 UTC 2005 / Peter Selinger <selinger@users.sourceforge.net> - newhidups: added Belkin support. Also added some new variables and instant commands (some of these were already used by

Thank you for your response. The point is that I have configured my system to shut down at the event "upsc Inform@localhost ups.status"!="OL", not at "LB". So there will be no /etc/killpower file created. At an ups.status != "OL" event, the following script named "notifyme" is run: echo `date` >> /root/upsLog echo " No power, shutting

Dean K. Gibson wrote: > > My Belkin UPS 1000 failed about a month ago; all of a sudden it > reported a battery failure. Since the Belkin logs showed this as in > instant transition from 99% to 22%, I assume a circuit board failure, > not a battery failure. Similarly, one Belkin UPS 500 circuit board > failed after I used my 100W amateur radio transmitter (not connected to

Hello, I do not know if i am facing a bug or a mistake (and if it is a bug i do = not know in which category I can put it on the bug tracker), so I post=20 my message here. I am trying to use the Morris function from the sensitivity package (but = that is not the problem). I created a (big) instruction that should=20 generate a morris object in which there is a data.frame i am interested=20

Hi, is there a way to use my Belkin F6H650 on the USB port? I already installed usbhid-support, but neither the hidups worked (reports "/dev/usb/hiddev0 is not a UPS") nor genericups with upstype=7 and the hiddev set as device ("ioctl TIOCMSET: Invalid argument") worked. I have installed the debian sarge package of nut 2.0.1 (2.0.1-4) Regards, Philipp

Zaid, I have a Belkin F6C800-UNV which has both a serial and USB connector. The serial connection is already working with the Belkinunv driver. I will connect via the USB and then compare both sets of variables. This should allow me to correlate and shed some light on the meaning of many of Belkin's non-standard "Usage" descriptors. With this information, it should be very easy

I'm sure I'm missing something, but I can't seem to get NUT working on FreeBSD. bryce at tahiti[/usr/local/etc/nut]>cat ups.conf [belkin] driver = usbhid-ups port = auto vendorid = 050d #productid = 0751 bryce at tahiti[/usr/local/etc/nut]>s /usr/local/libexec/nut/usbhid-ups -DDDDD -a belkin Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31

Bus 003 Device 002: ID 050d:1100 Belkin Components # /lib/nut/usbhid-ups -a belkin Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-) No matching HID UPS found Hmm best to stick with 2.0.4. Justin.

Bus 003 Device 002: ID 050d:1100 Belkin Components # /lib/nut/usbhid-ups -a belkin Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-) No matching HID UPS found Hmm best to stick with 2.0.4. Justin.

# /lib/nut/newhidups -DDDDD -u nut /dev/usb/hiddev0 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) debug level is '5' Checking device (0665/5161) (001/003) - VendorID: 0665 - ProductID: 5161 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 001 BELKIN 550VA UPS BATTERY BACKUP Should I be using a different driver?

Dear Ashley, I have no personal experience with the Tower-Rack series, but someone reported on the Nut-upsuser mailing list on 29 Nov 2005 that these models work with the "belkin" driver of the NUT software (http://www.networkupstools.org/). This is for the serial port. For USB, the NUT "newhidups" driver should work (or if it does not, we can fix it). The software that

Hi Andy, I've forwarded your info to the development list, and Carlos Rodrigues (the megatec driver author and maintainer. As a side note, there is a megatec_usb driver underway. You might want to give it a try. @Carlos: I let you update the drivers.list. Thanks for your report, Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader -

Hello, http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-September/003137.html http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-July/003014.html http://permalink.gmane.org/gmane.comp.monitoring.nut.user/2552 I still have this problem: $ dpkg -l | grep -i nut ii nut 2.2.0-2 The core system I thought this bug was fixed :( syslog:Dec 10

Hi all, I've finally gotten around to setting up the netbook that controls my UPS and I would like to make sure that I've got the metacode correct before configuring nut :) Here's what I've got: Belkin UPS F6C120auUNV * Batteries recently replaced * On battery: 24 port switch, PoE AP, antenna power booster, ADSL modem, MythTV server, 19" monitor * On surge

Hello Fabian, > I got my UPS (Belkin F6H350deUNV) to work with the "megatec" driver. > Obviously the de/uk part in the name of these products are > localizations of some sort. So the F6H 350/500/750 UNV Home Office > products should all work with that driver. > > bigone nut # upsc ups@localhost > battery.charge: 95.0 > battery.voltage: 13.50 >