similar to: Meaning of ups.delay.*

Hi everyone. I'm currently looking for a monitoring program for a HP PowerTrust UPS (A2998A) for Linux. It seems that nut supported these UPSs until version 1.4.3. What was the reason for the driver being removed from nut? Are there plans to reintegrate it? I was playing around with the UPS and put the results here: http://www.project-athlon.org/wiki/index.php/HP_PowerTrust_A2998A They

Hi everybody, I've got an Unitek iZi UPS 525 with a serial interface. The supplied cable looks fairly simple: RX->RX , TX->TX and GND->GND. Using this cable and Minicom with 2400 8N1 I'm able to issue commands to the UPS using the "Megatec Protocol" http://www.networkupstools.org/protocols/megatec.html so I know the UPS is fairly "intelligent" :-) and the

Hi List, I just got myself a new everpower-1000va. according to the compatibility list, the 'safenet' driver supposed to support it, however, when I try, I get this in syslog: Jul 24 15:05:22 tv upsd[26458]: Can't connect to UPS [everpower1000] (safenet-ttyS1): No such file or directory this is my ups.conf: [everpower1000] driver = safenet port = /dev/ttyS1 desc =

2006/11/16, Arjen de Korte <adkorte-guest@alioth.debian.org>: > Author: adkorte-guest > Date: Thu Nov 16 21:16:40 2006 > New Revision: 585 > > Modified: > trunk/ChangeLog > trunk/conf/upsd.conf.sample > trunk/server/conf.c > trunk/server/upsd.c > trunk/server/upsd.h > Log: > upsd: add MAXINIT parameter to upsd.conf to make the time upsd

Hi Al, I'm currently not much available, so I've fwded your mail to the nut list... You might get more reactivity this way... 2007/11/20, Al Grimstad <al at grimstad.mv.com>: > Hi. I don't have the energy or time to subscribe to one of the nut > mailing lists, but this brief FYI may be useful. > > I believe there has been a regression with respect to nut and the

Hi I am thinking about using the existing NUT software to tell the slave servers to shutdown if the temperature in the server room becomes too high. I was thinking of monitoring the temperature on the master NUT server and then just letting the slave clients shut down. But the slaves (and master server) needs to do a complete power off even though the UPS's does get 220v power all the

Hi there I have a Mustek PowerMust 1000 USB using serial port /dev/ttyS0. I use nut 2.2.1 with the megatec driver on Debian Lenny (testing), running on an AMD64 X2. (I was using a Debian Etch as slave, but to keep it simple I turned it off) My problem is that sometimes the UPS is running OK, but when the message "UPS is trimming incoming voltage" appears on knutclient (i.e. OL TRIM in

Hello. I have a PW9120 hooked up via a serial cable running NUT 2.0.4. When running upsc I cant see any parameter that looks like it would trigger a shutdown. Theres is nothing like "battery.charge.low: 30" or "battery.charge.warning: 30". I get: ambient.temperature battery.(charge|runtime|voltage) driver.(misc) input.(misc) output.(misc)

Hello, I'm using driver newhidups with APC Back-UPS CS 500. Most things works fine except the following: After I disconnect the UPS the upsd write "Data for UPS [apc] is stale - check driver" in /var/log/messages. In the same second it tells "UPS [apc] data is no longer stale". This repeats all the time the ups is disconnected: Jan 25 14:45:03 degpn026w226 kernel: usb

> Added: > trunk/scripts/hotplug/Makefile.am > trunk/scripts/udev/Makefile.am > Modified: > trunk/ChangeLog > trunk/Makefile.am > trunk/configure.in > trunk/docs/configure.txt > trunk/scripts/Makefile.am > trunk/scripts/hotplug/ (props changed) > trunk/scripts/udev/ (props changed) > trunk/scripts/udev/README > Log: > -

On Jan 2, 2008 3:34 PM, Arjen de Korte <adkorte-guest at alioth.debian.org> wrote: > Author: adkorte-guest > Date: Wed Jan 2 20:34:26 2008 > New Revision: 1210 > > Log: > Parsing continues if the HID path for a report ends in 0x00000000 (these will not be made available). Commonly used as placeholders. > > It looks like (but correct me if I'm wrong) that reports

Hello all NUT users and developers! Have some questions about nut suite: 1. Does upscmd provide only device-specific commands? Or commands like shutdown.stayoff are general and good for all ups models? When i see output of 'upscmd -l' - is this general commands that supported by given device or this is unique commands of this device? For example, i have APC SmartUPS-750 and it shows me

Hello list, I'm fresh in using an ups for shutting down a linux server and i was thinking someone could give a hand at debugging a problem i stumbled to. I'm used to the redhat type of distribution, mainly centos 4/5, and off-course i installed nut and nut-client from the available rpm packages. After some reading i disconnected the server from the power supplied by the ups and

Hello list, I'm fresh in using an ups for shutting down a linux server and i was thinking someone could give a hand at debugging a problem i stumbled to. I'm used to the redhat type of distribution, mainly centos 4/5, and off-course i installed nut and nut-client from the available rpm packages. After some reading i disconnected the server from the power supplied by the ups and

I don't understand how the info_len element from the hid_info_t structure is used in usbhid-ups. It appears to me that the only use of this element is now to indicate the length of the string: > float info_len; /* if ST_FLAG_STRING: length of the string */ The above is clear, if the element is flagged as a string, the size of this string is put in this variable, so that we can use this in

Hello I'm using nut 2.2.0 on FreeBSD 7.0-RC1. I've got two UPSes (Back-UPS RS 1500) connected to the host, and I often see them to go away. All the system logs are full of "Poll UPS [ups1 at upshost] failed - Data stale". What causes this issue? Is this a known issue, is it going to be fixed? What farther investigations should I do to get some more info on this issue? --

Hello, My MGE Pulsar Evolution 800 had some hardware troubles (it may be the batteries according to the manual). The fault was not detected so the power was cut to the load and nothing appears in the log files. Arnaud: do you know if the UPS have some way to report this kind of troubles to the PC so that NUT can handle it with a shutdown sequence ? Philippe

I notice from the hardware compatibility list that the XR model is supported - what are the chances that the older R3000h models are too? Thanks. /Per Jessen, Z?rich

Hello. I am trying setup NUT with Ever Net 3000 DPC. All my efforts end with "data stale" error. I've already set up Ever Net 2200 DPC on Debian Etch. According to driver documentation, driver I should use for both models is everups. I've downloaded software provided by producer: http://www.ever.com.pl/pl/pliki/powersoftplus-0.1.8-x86.tar.gz In this software drivers for 2200

Dear Sir, Please tell me if u have any method to increase the charging current of APC smart 1000/1400VA with and without external battery bank option. I am using externally 40 and 80 Amp lead acid batteries but charging time is too long. Please help me ASAP. Regards, Afzaal Ahmad UPS Engineer afzaal.ahmad at sbp.org.pk -------------- next part -------------- An HTML