similar to: tripplite_usb interrupt errs

Hi, I've been using TrippLite's PowerAlert software with my RM2200XL2U rack system and my APC BackUPS desktop systems. Unfortunately it doesn't work with openSUSE 10.2 (the software has problems with the serial port and UPS interfaces on openSUSE 10.2), so I've been looking at other options. I see that openSUSE 10.2 includes NUT, and it appears to work with my TrippLite UPS via

> > > 2.117586 send_cmd(msg_len=2, type='G') > > 3.219418 libusb_get_interrupt: Connection timed out > > 3.219474 libusb_get_interrupt() returned 0 instead of 8 while > sending 3a 47 b8 0d 00 00 00 00 '.G......' > > 4.219593 libusb_get_interrupt: Connection timed out > > 4.219661 libusb_get_interrupt() returned

He everyone, I have a Tripplite SMART700DVa using the tripplite_usb from NUT 2.5 (rev 2217) driver running in Solaris 10x86. My driver hangs when trying to connect. Once the driver sends the watchdog command ("W\0"), it can no longer receive any signals and eventually exits. The UPS responds to other watchdog commands ("W5" for example), but there doesn't seem to be

I'm trying to get a SMART2200CRMXL to work with nut, using a USB cable. tripplite_usb -a upsname returns: Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.2) Warning: This is an experimental driver. Some features may not function correctly. No matching USB/HID UPS found My system info: CentOS 5.5 nut installed from repo upsd version 2.2.2 TrippLite SMART2200CRMXL

As I understand it from looking through the archives of this mailing list and the source for the driver, tripplite_usb should work for this device. I tried to go through the source as best I could to see if I could add support myself, but got a bit lost. Anyhow, here's hoping that someone has some experience with this model. My system is using the latest CVS checkout of the Development branch

Good afternoon, I'm trying without much success to monitor a Tripp Lite OMNIVS1500XL using NUT. I checked the compatibility list and saw that this UPS is supported by tripplite_usb. The system is running Debian Stable, but I've downloaded NUT 2.0.3 and compiled from source since the packaged 2.0.1 doesn't include tripplite_usb. I compiled --with-user=nut. My first attempt at

Has anyone gotten this model of tripp-lite to work? sudo /usr/local/bin/upsdrvctl -DDDDD -u root start Network UPS Tools - UPS driver controller 2.0.5 Starting UPS: tripplite exec: /usr/local/bin/tripplite_usb -a tripplite Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.7 (2.0.5) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: TRIPP

Please ignore the previous message as I sent it before it was complete. Hello, I have a Tripplite SMART2200VS that isn't being shut down when the nut master asks it to. My initial test was simply upsmon -c fsd which did cause the system to shut down, however the UPS remained on and providing power to its loads. Looking in the logs (daemon and syslog) it was not clear to me that NUT was

I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -DDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (09AE/0001) (002/004) - VendorID: 09ae -

Is user authentication ever needed for just querying variables? My cacti script seems to be cooked, and I'm just wondering if I need to mess with username/password stuff. Not hard but if it's not needed then why bother... Thanks -- Eric A. Hall http://www.ehsco.com/ Internet Core Protocols http://www.oreilly.com/catalog/coreprot/

I'm running FreeBSD 6.2 with Nut 2.0.5 installed from ports... I have a TrippLite OmniVS1500XL plugged in, but I'm having little luck with the tripplite_usb module. I have already built and booted a new kernel with UHID disabled so that libusb can grab /dev/ugen0. At first I was able to get the following out of the driver: # USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -u root

<nut-upsuser at lists.alioth.debian.org> I am doing my best to avoid have to spend $280 for a network monitoring card to put into a $190 UPS just to have some good remote monitoring capabilities. Rather, I would like to monitor my many 1U Tripp Lite's on my network using a Raspberry Pi running Raspian and using NUT. However, I cannot seem to get it working. And I while the hardware

Hello, We have a Tripplite SMART1500RMXL2U and nut-2.2.0-6.el5 installed on Centos 5.3. I've been unsuccessful on getting upsmon to work. usdrvctl seems to start despite some warnings/errors: # upsdrvctl start smart1500 Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.0-) Warning: This is an experimental driver. Some

Greetings to all, I recently connected a Tripp Lite SMX500RT1U unit to a Synology NAS (basically a Marvell ARM equipped box running a custom 2.6.24 Linux). I tried using the tripplite_usb driver contained in nut 2.4.1 with not much luck. It does read the model ID and VA rating properly, but fails at everything else - mains voltage (this is a 230VAC EU model), battery config, unit status etc.

I'm having some odd problems with USRMGR and Samba group accounts. USRMGR seems to work fine for user accounts, and it also correctly displays the list of group objects (these are all stored in LDAP btw). This can be seen in http://www.ehsco.com/misc/samba/umgr-main.gif Two of the groups can be managed while the other two cannot. For example, http://www.ehsco.com/misc/samba/umgr-admins.gif

I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12. I originally tried the hidups driver which seemed to work, but produced a large amount of unhandled events. Then I tried the newhidups which told me my ups wasn't supported. When I try using tripplite_usb -u root -DDDD /proc/bus/usb/002/002 I get that there isn't a match. But when I try using tripplite_usb -DDDD

Hello, I have a Tripplite SMART2200VS that isn't being shut down when the nut master asks it to. My initial test was simply upsmon -c fsd which caused the system to shut down, but the UPS remained on and providing power to its loads. Looking in the logs (daemon and syslog) it was not clear to me that NUT was telling the UPS to shut down (I was expecting to see "Shutting down the UPS

Hey, I am wondering if anyone gotten nut to work with a Tripp Light Smart Pro 2U Rack/Towers (SMART2200RMXL2U). If so which driver did you use, or what driver do you think I should try? Also when trying use a nut driver, do you have to be a nut user? Thanks, Ricky -------------- next part -------------- An HTML attachment was scrubbed... URL:

Model: Tripp-lite OMNIVS1500 Error: Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: unknown/unknown libusb_set_report() returned -1 instead of 8 Could not reset watchdog. Please send model information to nut-upsdev mailing

The Compatibility page lists the OMNIVS1000 as supported, but the tripplite_usb driver doesn't seem to recognize my UPS. Below is the debug dump from attempting to load the driver. I am using the nut package from Debian: 2.2.1-2.1 and I was wondering if this was a known issue? maroon:/lib/nut# /lib/nut/tripplite_usb -DDDDD -a usbups Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver