similar to: Hint for upgrade from 2.0.3 to 2.0.5

hi i have a belkin ups here some setting chmod 0600 /dev/hiddev0 chown nut:root /dev/hiddev0 linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No matching USB/HID UPS found Driver failed to start (exit status=1) linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl -u root start

Mr. Selinger, I'm CCing you directly since it appears (insofar as I can tell) that you are one of the delelopers for the newhidups driver. This is the third time I've submitted this (hence the CC this time). Hopefully mailman takes it. I've tweaked my SPF records, and I'm hoping that was the problem. My sincere apologies if this has gone through and I just haven't seen it

hi i bought a ultra ULT31502 ups someone seem able to run this ups with nut just see Dean thread on: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=770423&Tab=11&NoMapp=0 i use suse 10.1, i installed nut the ups is connected directely to my computer with an usb cable lsusb return Bus 001 Device 004: ID 0d9f:0001 Powercom Co., Ltd with lsmod, i can see

First off, my apologies for bringing back this thread from the dead (September 2005, http://lists.alioth.debian.org/pipermail/nut-upsdev/2005-September/000150.html), however my problem seems relevant enough that I wondered what happened to this thread as it seems to have died after the message I quote below. Despite the fact that I am having trouble getting my Sweex 1000VA UPS (USB) to work, and

First off, my apologies for bringing back this thread from the dead (September 2005, http://lists.alioth.debian.org/pipermail/nut-upsdev/2005-September/000150.html), however my problem seems relevant enough that I wondered what happened to this thread as it seems to have died after the message I quote below. Despite the fact that I am having trouble getting my Sweex 1000VA UPS (USB) to work, and

There is a memory leak in newhidups. After 23 days uptime it used 138M memory. Apart from the memory leak, the system works ok. Is there anything I can do to help fix this problem? Tor. [root@tophat init.d]# ps -unut v PID TTY STAT TIME MAJFL TRS DRS RSS %MEM COMMAND 21122 ? Ss 1:35 0 69 137934 136800 27.0 /sbin/newhidups auto 21125 ? Ss 0:37 0

Hello, Help me please with *newhidups* setup. Does it work for someone on *BSD ? Here is the data. --------------------------------------------------------------- *** FreeBSD root.srv# uname -a FreeBSD xxxxxx.dyndns.info 5.3-RELEASE FreeBSD 5.3-RELEASE #2: Tue Feb 8 07:38:22 UTC 2005 admin@temp.botka.homeunix.org:/usr/src/sys/i386/compile/SRV i386 *** NUT ver.2.0.3 root.srv# ll /var/db/pkg/

Hi I am running FC5 with nut coming from the fc5 extras repositories. I am trying to configure a Gamatronic D-Compact ups. The cable that came with the ups has a serial connector on one end and a usb on the other. cat /proc/bus/usb/devices produces T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P:

Hi All I'm trying to get my Ultra UPS connected. It connects using a standard USB cable I have --with-drivers=hidups in the configure command and I have lsusb showing Bus 001 Device 002: ID 0d9f:0001 Powercom Co., Ltd Bus 001 Device 001: ID 0000:0000 I have /dev/usb/hiddev0 now matter what I try I keep getting upsdrvctl start Network UPS Tools - UPS driver controller 2.0.3 Can't

Regards I am installing NUT for the UPS Skate UPS-2200D, the UPS have conection with USB to PC and i have problems to configure nut the ups is conected and Linux report this config Aug 19 23:34:56 dakota kernel: [22393.099595] usb 2-2: new low speed USB device using uhci_hcd and address 7 Aug 19 23:35:06 dakota kernel: [22403.186326] usb 2-2: Product: MEC0002 Aug 19 23:35:06 dakota kernel:

Hello, I am having trouble getting upsd to start. I am using the Debian NUT packages version 2.0.3 (current in Debian/sid). I am using the newhidups driver with an APC Back-UPS BR 800. The init.d script wasn't functioning, so I backtracked to running upsd manually and I get: foxstar:/etc/nut# upsd -u root Network UPS Tools upsd 2.0.3 Can't connect to UPS [foxstarups] (newhidups-auto):

I have a new APC Back-UPS XS 1200. It is detected properly by the Linux kernel (2.6.16): # dmesg usb 5-3.4: new low speed USB device using ehci_hcd and address 9 usb 5-3.4: new device found, idVendor=051d, idProduct=0002 usb 5-3.4: new device strings: Mfr=3, Product=1, SerialNumber=2 usb 5-3.4: Product: Back-UPS XS 1200 FW:8.g1 .D USB FW:g1 usb 5-3.4: Manufacturer: American Power Conversion usb

Hello world; been using nut atop Debian GNU/Linux (sid) for about two years by now, my configuration broke as I upgraded the machine this morning (headin' for kernel 2.6 to have full support for the new GBE NIC included). I read through the UPGRADE.gz instructions provided with the Debian packages and tried to fix things according to the instructions pointed out there, but things still just

Hello, I'm using NUT to manage a MGE Ellipse ASR UPS, with the newhidups driver. It works fine, except that after a few hours, I get a few errors from the kernel and the driver dies. Here's the output from the syslog: Apr 26 02:00:41 ezquiel kernel: usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 128 rq 6 len 255 ret -110 Apr 26 02:00:43 ezquiel last message repeated 2 times

I have a new Belkin F6C900-UNV. I see that it's not listed in belkin-hid.c The VendorID is 0x050d like all the Belkin UPSes, and the ProductID is 0x0900. I haven't had a chance to actually test the development version of nut yet, since I'm running Fedora Core 6, which still has nut 2.0.3. `newhidups -DD -a myups` gives the error of: Checking device (050D/0900) (001/002) - VendorID:

Hello. So as my english is not so good, i'll try to write my story in bash commands :o) miwa@zork3$ uname -mrs FreeBSD 5.5-STABLE i386 miwa@zork3$ su root@zork3# cd /usr/ports/sysutils/nat root@zork3# make && make install root@zork3# cd ../nut-usb root@zork3# make && make install root@zork3# cd /usr/local/etc/nut root@zork3# cat ups.conf user=root [MGE-Ellipse]

I recently purchased a CyberPower 800AVR UPS which I'm trying to use over USB with my PC (ArchLinux 0.7.2 [aka up to date]) and nut 2.0.3. Following the setup instructions, I have an entry as follows in /etc/nutups/ups.conf (where I chose the configuration file to go when building nut): [MyUPS] driver = cyberpower port = /dev/bus/usb/004/007 desc = Workstation

Hello, I'm facing problems as I'm installing NUT to monitor a MGE Ellipse ASR600USBS on a FreeBSD 6.1 box. UPS is recognized as : ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 I'm temporarily using root profile (devfs/devd scripts not modified atm). newhidups starts & runs fine (unplugging mains makes newhidups outputs lots of data when started with -DDDD flags)

I almost had nut_2.0.5-3_i386.deb (from http://packages.debian.org/unstable/admin/nut - installed via dpkg, not via repository) working: * problems with getting it to come up during boot * monitoring via knutclient was OK * shutdown on low battery worked adequately, if not quite as described) and newhidups suddenly stopped talking to my Belkin F6C550-AVR . It's only been in use for a

I'm using an APC Back-UPS XS with nut 2.0.3. I've recompiled/reinstalled the source, and switched over to the newhidups driver (instead of the old hidups driver). I modified by ups.conf to use newhidups. The hotplug files were not automatically installed, I had to copy those from the scripts directory to my hotplug/usb directory. The newhidups driver loads find and then works for a