Displaying 20 results from an estimated 2000 matches similar to: "hardened kernel and nut access to ttyS"
2010 Dec 01
1
Upsdrv failed to start
Hi,
Here's the message when I try to stop upsdrv daemon (/etc/init.d/upsdrv
stop)
* Stopping UPS drivers ...
Network UPS Tools - UPS driver controller 2.4.3
Can't open /var/lib/nut/usbhid-ups-auto.pid: No such file or directory
Here's the message when I try to start upsdrv daemon (/etc/init.d/upsdrv
start)
* WARNING: upsdrv has already been started.
And finally here's
2007 Mar 09
1
sip tunnel
Dears
my Internet Provider , prevents , sip connections,
between sip client(sip phone) and sip server,
(asterisk + ser) .
both of client and server are mine.
is there any solution for tunneling the sip packets?
best
Mani
____________________________________________________________________________________
Don't pick lemons.
See all the new 2007 cars at Yahoo! Autos.
2007 Mar 13
1
voicemail scenario
Hi all,
i need help to implement a voicemail scenario. What i
am trying to do is the following.
user X dials a direct access for user Y voicemail and
is asked to enter a number (e.g 12345678) and then
leaves a message. Then asterisk sends a notification
with attachement. The problem is that i need the
number entered (e.g 12345678) in the subject. Is that
possible.
thx in advance.
2007 Sep 13
1
how to determine if a SIP extension has DND on or off
I would like to determine through an AGI script if a
specific SIP extension has DND on or off.
I know that if the SIP client dialed *78 or *79 it is
usually enough to just do a:
database show dnd
to fetch the DND status from the database.
However, not all clients dial *78 or *79 (or whichever
feature code is defined for DND).
Some softphones such as SJPhone have a DND button.
When pressed and
2007 Nov 28
4
CyberPower 1500AVRT won't load driver!
Hello! I got my hands on a CyberPower 1500AVRT, and i'm trying to get it
connected to my Gentoo machine.
I've followed all the basic guides on setting up NUT and UPS' but have had
no luck.
My current ups.conf is:
[cyberpower-gentoo]
driver = cyberpower
port = /dev/ttyS0
desc = Workstation
Upon running /etc/init.d/upsd start or upsdrv start I get:
* Starting
2007 Jun 18
1
atxfer attended transfer feature
I would like to know if atxfer is supported somehow
because there seems to be little documentation for
this feature. I know most people expect a good SIP/IAX
phone to do the job but I think it's nice to be able
to do attended trasnfers with a simple ATA-connected
analog phone. I have Asterisk 1.2/Freepbx and
features.conf has a line regarding atxfer and I set it
to *2 (Default). While # works
2007 May 30
0
Call transfer while dialing
Hi,
I want to transfer the call to a conferencing
room while dialing.
I tried to do that using manager API(Redirect),
but it did't work.
Regards,
Jason.
____________________________________________________________________________________
Don't pick lemons.
See all the new 2007 cars at Yahoo! Autos.
http://autos.yahoo.com/new_cars.html
2007 Jun 23
1
Zaptel Compilation Error
Hi List;
I think my problem in Zaptel compilation is related to
autoconf: no input file, anyone has an advise?
Also, I did a change in the Makefile existed in the
following path:
/usr/src/kernels/2.6.20-1.2319.fc5-i686/
EXTRAVERSION = 2.6.20-1.2319.fc5
Now, if I run uname -r then I get output:
2.6.20-1.2319.fc5
But the directory under the kernels is:
2.6.20-1.2319.fc5-i686
So do I have to
2014 Feb 18
0
Wait for network delay
On 2014-02-16 16:36, Elliot Dierksen wrote:
> On 2/5/2014 8:24 AM, Charles Lepple wrote:
>> On Feb 4, 2014, at 10:48 PM, Elliot Dierksen wrote:
>>
>>> NUT will complain endlessly about communication errors and never
>>> establish SNMP communication with my APC UPS
>> Hmm, at first glance, I read the "complain endlessly" part as a figure
>> of
2009 Sep 28
1
Data stale & Got disconnected by another driver: Device or resource busy
Good day all and sorry my English.
I have some problem when updating NUT. I have server with 4 UPS connected.
When I starting upsdrv and upsd and after sometime (1-2 minutes) I can't get
data from ups's
# upsc apc at localhost battery.type
Error: Data stale
and errors in /var/log/{syslog,debug,daemon.log}
usbhid-ups[2385]: Got disconnected by another driver: Device or resource busy
OS:
2010 Nov 18
1
Mustek PowerMust 600 USB on Gentoo
Hi,
I'm trying to setup my Mustek 600 with USB (no serial ports on my computer)
on Gentoo. The configuration I use is:
[Mustek]
driver = megatec_usb
port = auto
desc = "Power Mustek 600 USB"
The NUT I use on my x86_64 machine is:
sys-power/nut-2.4.3-r2 USE="bash-completion ssl usb xml -cgi -hal -snmp"
When I start upsdrv I get:
weasel ~ # /etc/init.d/upsdrv start
2008 May 06
3
asterisk queue cluster
I setup two asterisk servers with identical settings
(same extensions, same queues, etc). Each one is
connected to the same amount of incoming/outgoing
links (1 PRI, 4 BRI, 1 IAX friend, etc, on each box).
Most extensions are sip and they register via DNS SRV
and other methods so that the two servers are load
balanced. Incoming PSTN calls (BRI) reach 50% each
server so that's load balanced
2007 Jul 30
6
outbound caller ID
Hi,
I would like to know if one can set the outgoing
caller ID within Asterisk when calls are going out
through:
1) an analog POTS line (I suppose not)
2) a telco BRI line (I don't think so)
3) a telco PRI line (maybe)
4) a voip provider (surely)
Thanks,
Vieri
____________________________________________________________________________________
Moody friends. Drama queens. Your
2006 Dec 11
2
howto setup BNT-1500AP on gentoo
Good afternoon. I try to put nut on gentoo. Has executed installation
by a standard command emerge nut. All has passed successfully. I use
UPS POWERCOM BNT-1500AP. It is connected to serial port 1, i.e. for my
system it/dev/tts/0. In/etc/nut/ups.conf
[powercom]
driver = powercom
port = /dev/tts/0
desc = "PowerCom BNT-1500AP on IP-PBX"
modelname = "BNT-1500AP"
linevoltage = 230
2010 Jul 24
1
NUT upsdrv Using bcmxcp_usb Won't Connect to UPS
I can't seem to get NUT to connect to my new PowerWare (Eaton) 5115.
(Linux 2.6.34.1 x86_64, Gentoo)
# /etc/init.d/upsdrv start
* Caching service dependencies ...
[ ok ]
* Starting UPS drivers ...
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3)
USB communication subdriver 0.18
2015 Nov 20
3
usbhid-ups dying, consistently
This issue has been occurring for years on my setup.
OS: Gentoo
most recent kernel: 4.1.12
UPS: Eaton Powerware 9130 rackmount 2000kVA, connected via USB
The upsdrv service dies and must be restarted several times a day.
Zero output to dmesg or any other log other than failed reattempts
reporting no such file or directory errors.
"/lib64/nut/usbhid-ups -DDD -q -a powerware" exited 1
2014 Mar 04
2
Cannot chain to another PXE server on the same subnet
Hi,
I have a Linux server at ip address 10.215.144.7 running DHCP, TFTP and syslinux.
DHCP config contains the following:
next-server 10.215.144.7;
filename "/pxe/syslinux/pxelinux.0";
and the 'default' pxelinux.cfg contains:
LABEL altiris
??? MENU LABEL ^7. Altiris
??? COM32 pxechn.c32
??? APPEND 10.215.144.60::/BStrap/x86pc/BStrap.0
When a PXE client boots in my network
2008 Aug 05
1
Grandstream RS-232 config (slightly off-topic)
I realize this may be slightly off-topic but I'm wondering if someone here can lend me a hand.
One of my GXW4008 has gone "unconfigurable" via standard HTTP (refuses connection) and I can't use the built-in IVR because I had previously disabled the "keypad update" feature. So I'm stuck with just telnet, the reset button and RS-232.
Telnet commands are very limited
2006 Nov 30
6
200+ analog phones connected to FXS modules
I am trying to find out the best way to replace one of
our hardware PBXs. It currently has 200+ analog phones
connected to it. The idea is to take advantage of the
already installed phone cables (big building) so I'm
trying to avoid the use of ethernet adapters (if
possible). However, I'm realizing that it's an
expensive setup and will definitely require two or
more cooperating
2008 Jan 07
3
asterisk CLI and no such command "stop"
Hi,
I'm probably missing something trivial but I don't
understand what.
Asterisk is loading fine but when I connect to the
console (asterisk -vr) and type "stop" I get a no such
command reply:
*CLI> help
(...)
skinny show lines Show defined Skinny lines
per device
soft hangup Request a hangup on a given
channel
unload Unload a